Underfloor heating system installation by Continal Underfloor
Vložit
- čas přidán 16. 11. 2016
- Get your underfloor heating quote here: www.continal.co.uk
Another fantastic underfloor heating customer testimonial for Continal Underfloor.
Underfloor heating system installation “how to” video, showing how to install an insulation over slab system using Continal® staples. It includes a nice review testimonial for Continal and the service they provide across the UK. The system is suitable for MLCP, AluPlas® and SUPERflex™ pipe.
For expert advice call Continal Underfloor on 0333 800 1750, or email info@continal.co.uk. www.continal.co.uk.
This is same korean houses. Most of korean house have this sistem.
This is a perfectly executed underfloor heating installation. Good guys and a really good job.
Korean way of installing radiant heat over wood subfloor. Koreans having been using this heating for decades.
electronic control can be expensive and prone to breaking down. simple manual valve to each circuit is good enough for hot water flow adjustment and good for your lifetime. absolutely no fancy control equipment.
1. install the tubing after all walls are done. each room has a separated circuit. no circuit in bathroom. minimum circuit on passby area. architect's drawing often make the install complicate. Just do it after all walls are done, then you would't risk nailing to the tube .
to each room, lay in the order of the following material to the subfloor
1. a thin plastic or vinyl paper to have some concrete proof effect to the wood framing, vinyl should go a few inches up the wall above the final mortar level.
2. 2 inches thick rigid form ( usually pinky) Tape them to prevent mortar leaking
3. 2 layer of rebar net ( the cheap wire net, commonly used for sidewalk concrete) .
4. tubing ( plastic pipe) tie the tube to the rebar
5. 1 more layer of the rebar net on top of the tubing. tie them again to the bottom rebar.
6. a nylon mesh of the very flexible nature, sagging in its own and loose enough that mortar will flow freely into the mesh. Do not pull the mesh flat . loosely folded here and there . This mesh is critical to prevent the concrete from cracking.
7. pour the mortar, just waterly enough as to almost level itself. absolutely no gravel. pouring room by room is much easier to work. pouring whole floor at once? out of mind?
good luck.
Definitely worth paying a good company to do this. The amount of underfloor heating I've inspected over the years that has been poorly laid or just thrown in is unbelievable. It's always worth paying for some thermal imaging afterwards to see how the floor is performing and to make sure the pipe runs are as described by the company/manufacturers instructions.
Ondol(underfloor heating system) is 3000 years old in Korea. Welcom! Ondol paradise
성희 강 😳just when I was about to comment on how advance technology has become 😆😆😆😆😆
If only installations were as epic as that music track makes them seem. . .
it's very common and traditional heating system in south-korea, which is called "온돌" (ondol, means warm stone). its history goes back to more than 2000years. in the old days it used stone, mud and smoke to heat the room and to make path upto the chimney.
e.g.) put fire kitchen furnace->smoke goes through stone and mud tunnel->room heats up -> smoke comes out to the chimney
but now days we make it like that way shown on the video.
it's very good way in winter. it makes all the room very warm that's why korean don't wear shoes in the house and sleep on the floor.
Interesting we (central europe) never called that korean style but underfloor heating and I saw first example in 1970 but if you think a style on ancient system well than I could find that:
www.ancientpages.com/2018/01/14/hypocaust-first-central-heating-invented-ancient-romans-2000-years-ago/
Beautiful install mate
All south korean houses uses these types of heating the floor system
It's names is 온돌
These guys must kick ass at playing snake.
Apparently (reading through the comments) this is common in South Korea.
fantastic job
Nice job!
Nice video.👌 Thanks for sharing,Stay Blessed.🥰
I just love the feeling of heated floors in the morning
First Last its not really that nice because you have to wait about 10 plus hours for the heat to really get in the floor and if you want them hot in the morning you will have to deal with the heat while your trying to sleep so I only do other rooms other than the one I'm sleeping in
This makes me miss living in Korea.
Is the finished pipe space 250mm? Or is that the first run then back in between giving a 125mm space. Thanks.
What is the difference between this and the heating Matt things. This is a larger pipe and spaced more apart but difference in efficiency? Heat wise etc? Can we see that
Good job❤️
Looks like a great job. Have you looked into using load compensation with underfloor heating ? Having a floor heat output perfectly match the room heat loss brings a new dimension to underfloor heating, total comfort and stable room temperature. Coupled with a condensing gas boiler load compensation and underfloor heating is a perfect partnership. In many cases the expensive room controls, actuators, pump sets and zone valves are no longer required. This reduces instalation costs and running costs while providing better comfort levels that traditional underfloor heating. Viessmann make the ultimate boiler and controls to partner underfloor heating.
Just in case people didn't see all the other 1 million post, this is how Korea does their floors
🤣🤣🤣
Good job
This is korean `ondol~`
Hi. Is it posible to heat shower floor? And all bathroom?
Very good
Here in South Korea they have been doing this for years. So many years in fact that before gas the use fire to make the floors hot in the winter
Interesting we (central europe) never called that korean style but underfloor heating and I saw first example in 1970 but if you think a style on ancient system well than I could find that:
www.ancientpages.com/2018/01/14/hypocaust-first-central-heating-invented-ancient-romans-2000-years-ago/
The Romans were using fire to heat under floors quite some time ago.
good job
great video. would be even better if you could give more details about connections for the boiler, manifold and so on...brilliant vid nonetheless!
Hydroman 1
awesome
I have always wondered if you could lay down a flashing or foil first before the piping to reflect as much heat upwards as possible
Why? The PIR insulation board already has it.
Thanks
The music made it even more interesting
If you have the whole floor radiating out an even heat, this seems more efficient than a radiator as the surface area is so big? The air is warmed right above the floor and this is where the cold sits.... by directly convecting from the floor, does this lower bills by having a lower temperature and a much bigger surface area? Or am I over estimating the efficiency?
On the whole underfloor heating is approximately 25% - 30% more efficient than radiators. This is due to the larger surface area being heated and a lower flow temperature used.
Feel free to get in contact with our team, we will aim to answer any questions you may have.
0333 800 1750
Does anybody know if they use this system in Korea?
Must use device for pipe
Korean "On-Dol" is a bit different than the Romans in that, Koreans didn't heat the floor the sake of heating a room. They took the fire in the kitchen for cooking, etc. and re routed to heat a room.
I'd hate to think what you would have to do in case of a leak, with flooring and concrete.
All our systems consist of one long run of pipe which is always pressure tested before being set in screed. We very rarely see damage, unless someone has damaged the pipe by drilling/cutting the concrete etc.
Yeah I can see system failing due to lack of power for extended time during freezing system.... but that is kind of a rare possibility and if the pipe has enough flex then the freezing won’t crack the pipe
@@macrixen Jou add anti-freeze... would that help? Does it do any bad to the system (pumps, pipes)
Boudewijn J.M. Kegels adding anti-freeze is fine... just have to remember to change out the fluid every couple of years or so.
Almost every Korean use this as a heating system in houses, and yet, I have lived like decades with this and still got no problems.
I am aware my question is based in ignorance, which is why I am asking it, but why is PVC used as the underfloor piping? Wouldn't copper pipe conduct heat into the floor better? Is it used purely out of convenience of installation?
It is a good question and there are 2 main reasons that underfloor heating consists of plastic pipe.
1. Our pipe is 1 long length with no joins/connections (unlike copper pipe) so is incredibly reliable and not prone to leaks.
2. The plastic pipe does not corrode like copper pipe can.
Can we install in j&k india
That was a great video. But a serious question. Isn't the person rolling the tubes on the floor going to fuck up his back after a few projects? My back hurts from watching this video. Although it was informative.
Nico 🙋♂️👍👍
It’s possible for cold
In case if any of the pipes leakes out under floor how you are going to fix it?
You leave the system under pressure until concrete is poured. And no joints allowed on loops also to optimize the flow.
Never had a leak or heard of one in 25years.
Finely lecture
What is the benefit of installing the pump in the colector?
what is the name and make of that stapling tool. Clean work and neat.
it seems to be a proprietary tool, also sold by continental underfloor
Hi Todd, that is our Tacker Gun. To order one please speak to your TSA on 0333 800 1750. See more here... www.ufh.co.uk/products/underfloor-heating-tools#tacker-gun.
that kind of heating system is called ondol(온돌). a very old heating technique in korea. it makes room very warm that why korean don't wear shoes in the house and sleep on the floor.
What are the recommended boiler sizes or spec for this type of install?
Hi Glenn
Thanks for the comment. Sizing of the boiler varies with the size of the system required. Our fully trained Technical Sales Advisers can give you all the information you need for your UFH system. If you would like to find out please call us on 0333 800 1750. If you need a quote quickly send us your plans by text, message or email - more info on how at www.ufh.co.uk/underfloor-heating-quote.
I hope we hear from you, many thanks
Dan
I did this with garden horses and carpet
Oh man we don't get to see the finished product
this is Ondol korean style 🤗
Wotan and Erda would approve the installation in the Valhalla.
This is a traditional Korean style. 😍
Interesting we (central europe) never called that korean style but underfloor heating and I saw first example in 1970 but if you think a style on ancient system well than I could find that:
www.ancientpages.com/2018/01/14/hypocaust-first-central-heating-invented-ancient-romans-2000-years-ago/
green please Google "on dollar or Korean ondol"
@@hunbaeyoon
google what? Is Korean style older than 2500 years? Older than romans ? If not ? why google it?
It was all ready invented by roman
green calm down . Yes underfloor heating system invented by Korean ancestors before BC 5000 yrs( 5 k not 5 hundred) --->>ko.m.wikipedia.org/wiki/온돌. You may need google translate if you know only one language
I know Wiki is not always right. And I was not able to find any papers to support the wiki . You are right at this moment
I thought this method of construction style is only in korea. Just amazing!
외국으로 수출했어요. 우리 건설사가 짓는 외국 아파트는 온돌써요.
its not only in Korea
아냐... 엄밀히 말하면 온돌에서 영감을 얻어서 미국에서 처음 개발된거야... 애당초 온돌이랑 공통점은 바닥이 따뜻하다는거 밖에 없고 온돌은 간접난방이고 온수파이프는 직접난방이야...
Interesting we (central europe) never called that korean style but underfloor heating and I saw first example in 1970 but if you think a style on ancient system well than I could find that:
www.ancientpages.com/2018/01/14/hypocaust-first-central-heating-invented-ancient-romans-2000-years-ago/
Wanna see final result floor.
It feels overwhelmed to see this system. =)
Do you do first floor underfloor wet heating systems?
Hi there, if you would like to contact one of our specialist team on: 0333 800 1750. They will be able to help you with the best system for your project.
não sei oq é isso ou pra que serve, mas to assistindo
Mmm why I need that? If I had Hester on my house ?
How many!?
Y QUE PISO VA ENCIMA???.
Why before concreting wasn't pressure check done? I have read that's very important.
Hi there,
This time-lapse video shows the laying of an underfloor heating screed system.
The installers are a company that specialise in screed, they had pressure tested the system prior to screed being laid (just not shown).
Pressure testing is important to do and should also be done for a second time prior to commisioning the system.
If you have any other questions, please feel free to contact our team on: 0333 800 1750
Thank you.
رائع
I have a exam tomorrow
and same here
an exam
Hope it's not on grammar
I have two tomorrow... but hell, this looks interesting
4:26 am atm but hey, it's a nice video
Continental or continal which is correct ?
Hi there Ron, We are now Continal underfloor.
Nothing has changed, except the name.
Visit our website to be sure for yourself, www.ufh.co.uk
well, i live in tropical country and never have problem with temperature..
Oba gang nan style
👏
Way, way too efficient!! JK Nicely done!
Why is everyone calling this a "korea style" heating? Is it any different from the regular floor heating? I believe that the system in my house is identical (the only difference is that we have concrete floors) and it is of the same design as used in many houses in Poland.
Thanks for sharing, also commonly used in North part of China.
Interesting we (central europe) never called that korean style but underfloor heating and I saw first example in 1970 but if you think a style on ancient system well than I could find that:
www.ancientpages.com/2018/01/14/hypocaust-first-central-heating-invented-ancient-romans-2000-years-ago/
wauw are you trolling everyone with the same comment. seen it know 3 times
mibars Google "ondol"and you can find why.
@@mmabdulahi now*
👍👍👍👍
So whats the purpose of having a warm floor?
to cook.
heat go upward. so heating floor is efficient for keeping warm atmosphere. it starts in Korea first. that's system called "온돌, on-doll"
rich people these days
It uses radiant heat, or radiation heat. It just makes you feel good and keep the humidity in your room stable. IMO it's better than using convection heat. Heated air coming through vents makes my room dry. and I think it is pretty economic even though the installation cost could be pretty steep, once you have the system installed in your house it is fairly cheap to run it depending on the insulation. If I had money I would definitely get it.
I will make you remove your carpet and footwear and walk barefoot on the floor and the best thing is you can sleep ditectly on the floor... this a unique korean floor heating system called "ondol" practiced thousands of years ago..
What happens if you get even one small leak?
Hi there,
In this situation, the pipe would need to be repaired with a coupler that we can provide. We would recommend replacing the loop though as it would reduce any issues that joining pipe may cause. When the repair is completed a full pressure test would be required.
If you have any further questions please feel free to contact us through our website: www.ufh.co.uk or by phone: 0333 800 1750
More than 10 million korean houses use this system several decades. but leak problem is very very rare. Trust this system.
good
omg whats this its great work i wish to join and learn with you i m from algeria how can i join and learn with you
Welcome to plumbing.
What is this Korean style thing!? Get a decoiler by the way
Is there a cooling system similar to this system?
yes! its the radiant cooling system
it is possible to use the exact same pipes. But You cant have both, heating and cooling at once. Few challenges may arise. You have to control temperature 18c degrees is the bottom what you can reach. You can find few tutorials on how you can combine this system with an air conditionier. Obviously, there is a lot of controversy in doing so. But from few happy users, I can tell that it is doable if installed properly.
地热？
actually this idea regarding underfloor from korea which is called on-dol. it's way better than radiator.
Is it Continal or Continental?
The name changed to Continal, but our service is still the same.
Visit our website on: www.continal.co.uk
hard maintenance?
Not at all. but once you get a leakage you're pretty much fucked but it rarely happens.
> "it rarely happens."
plumbers usually tell me that ....
Is thare any carbon monoxide issue due to this system??
Hi there,
Carbon monoxide is no issue with ufh system as it is produced by a direct heat source such as boilers
Please...te name of this tool in 1:13. Thanks..
Hi, that is our Tacker Gun. To order one please speak to your TSA on 0333 800 1750. See more here... www.ufh.co.uk/products/underfloor-heating-tools#tacker-gun.
tHANKS...
can do it on your own with a decent dispenser
Hi Paul, thanks for the comment. You're correct, using our Pipe Decoiler makes the job quick and easy for a single installer. Learn more here: www.ufh.co.uk/products/underfloor-heating-tools
Continental or Continal??
Never mind. I see from a response to one of the comments below that there was a name change from Continental to Continal
You need to put that spool of tube on a dispenser or your worker is going to go home with a really bad back!
How much would this cost
All of our systems are bespoke designs. Please visit our website www.ufh.co.uk or call 0333 800 1750 to learn more. Thanks!
This poor guy's back.
Mark Zuckerberg of heating system installation
You can take it up a notch and make it a geothermal system.
You’re supposed to pressurise the system when screed goes down
Absolutely, we recommend pressure testing the UFH pipe with water prior to laying the screed to 6 bar for at least an hour. The pressure should be maintained while the screed is being laid. Failure to do so can result in costly repairs if the pipe has been damaged during screeding. Unfortunately, we didn’t have the time to show this step in the video. However, all our systems come with an instruction manual with every step clearly laid out. Thanks for your comment.
For more information about Europe's widest range of underfloor heating systems and to get an underfloor heating quote, visit our website www.continal.co.uk.
Continental Underfloor.
Continental Underfloor Slovakia no problem very very good job same thing my opinion 🇸🇰🇸🇰🇸🇰
Do you guys do work in scandinavia? I have a house. And i wanna set up the underfloor heating system.
It's...normal heating system in korea.......use hot water pipe..
korean type ;)
😂😂😂😂😂😂👍
Hello sir
Long time miss hot
The poor guy following behind!
calefacción romano calefacción romano
great video !!!!!we love our inlay its bad asssss!!!!!! check it out on our site