Day 4 of 6 printing in 12 colors
Vložit
- čas přidán 30. 03. 2023
- Testing a long 3D print on the Bambu Lab X1-Carbon with 3 AMS units and the hub. We're halfway through. All pieces looking good so far. Lots of filament poop piling up.
- - - - - - - - - - - - - - - - - -
Twitter: / mihaidesigns
Instagram: / mihaidesigns
Patreon / mihaidesigns
Buy me a coffee mihaid.com/coffee
mihaidesigns.com
#mihaidesigns #shorts - Věda a technologie
I hope you get one of those filament making machines at some point, it'll be really interesting to watch that
there is a company that lets you send in scrap pla and they revycle it and pay for shipping
@@masterolof138 I know. Doesn't take away that watching Mihai experiment with his own filament recycling would be really interesting to watch
@@masterolof138 good for everyone who has a printer like this, but that doesn’t create content for anyone
@@thereinthetrees_5626 technically it does because 1. he can show it off in a couple if videos maybe explain hoe it works
2. he'll have more fillament to use for prints in the vids
It should be very interesting to see recicled fillament from all those collors mixed.
Something, Something, eggs in one basket. I would never risk that many failures at one time personally. Nerves of steel with this print.
Once your confident in your printer and know you’ve adjusted it right then you would know you’ll be fine
@@TomV-le9dw In this case it's sa terrible idea anyway, since he's printing multiple colors... Wasting a tin of color each time it's changing model.
@@TomV-le9dw For me it's not even a matter of trusting the printer, it's trusting whether the ancient power wires in the neighborhood are going to piddle out at the slightest breath of wind 😭😭😭
@@FranFrooHave you considered getting an uninterrupted power supply (aka ups battery backup)? They are designed for power fluctuations and interruptions. Hopefully, the power grid in your area is stable enough for a battery backup to bridge the outages. 🤞
This just makes no sense. Extra time, risk of failure and wastage, for no reason.
You better have one of those filament recyclers. Waiting to see your DIY Filament video. Lol
The amount of poop is crazy. 😂
If he didn't print them all at once, total amount of poop would be multiple times lower. You don't want 12 filament changes happening on each layer. It not only produces ridiculous amount of poop but takes way more time than printing next one after finishing another as filament change takes a lot of time. You should be able to fit about 5-8 of these at once due to required printhead clearance when not printing everything at once.
If to mix them on the recycling the color will match as well )
Mr Bambu has a very fast metabolism. Let’s be more mindful of that next time before poop shaming him please.
@@woopssergyou should post that as a comment not a reply. Yup
so tru though
You can reduce waste drastically by making a spare model and increasing the infill and using it as flush. Also with using the model as flush I haven't had any problems with bleeding with leaving the purge settings set at 280 across the board. Onlything I've notice is on certain models I made need to increase the walls so colors/infill doesn't show/effect the shade or how the white looks
Good idea💡
I understood nothing, but good that people are mindful of teh waste. 😊
that's just waste with extra steps
very colourful cool looking waste@@JetMaxim666
@@JetMaxim666didn’t know that making more of the same model counts as waste
So much trust in that textured sheet
them PEI ones seem more than fine to me, never had a print come off and i had it since January
the only time i had issues was when i printed almost the whole size of the bed in PETG on an A1 Mini, and it sort of warped, but it pulled the whole buildplatr up from its magnets instead of coming off of the buildplate so adhesion is top notch 😂
it was a large thing, not individual small ones
Trust me, with PETG & PCTG at 90C they STICK. I have to wait for the plate to cool for about 5 mins.
@@Notabot1310 PETG at 70 (stock profile) even, have to wait
We really need your Hotend swapping mechanism to become the norm... It would really allow for more economical multicolor prints. For now, pretty much design my stuff to change color at the top or bottom layers
I mean at least for me this is only really good for dissolving supports or better text at the top or bottom layers. Way too much waste for multi color. It dose look sweet though
To be fair it looks like he intentionally made this to stress test the printer. You could slice a few separate plates with multiple models put on each with far enough distance from each other too meet printhead clearance requirement. As it's required when printing only one model at once. Would take like 5 times less time to print with an order of magnitude less poop.
"POOP"
💀
Should take all the scraps and put them into a filament machine and turn it into a new spool 😆 itd be cool to see a machine that has that integrated and when it puts a certain amount of waste in it turns on and makes filament
it would be brown. It's like you morons don't understand color. Not only would the color just end up brown, but the mixture of all these different colors will cause the filament to be really fragile and print improperly
Thanks for showing the "poop" :)
And good luck for the rest of the print!
bro sounds like spy tf2
Would be great to compare the amount of waste between the AMS and MMU3
the mmu3 still doesn't really exist at this point, but I'd love to see a comparison
@@morbus5726 the MMU2 SUCKED!!!!!!!!!!!!! waste of 500 dollars
@@sniperpronerfmods9811 AMS is waste of $350
@@irbose9895 no... it actaully works
still haven't worked in a way to calculate and deposit waste into infill instead 😅
I'm happy people still remember omnom😊
"supaman" I love your accent
Me over here with my ender 3 that can barely print in one color sometimes looking at awe at your prints 🤩
save money then?????
hows the black doing? run out yet? (btw the prints look great!)
This is so exciting. I have a question, see the Superman figure? See that noticeable line just at the tip of his “S” on his suit? What causes that? I have an ender 3 and I find that randomly appears on my prints and very annoying. I thought it was the Z axis binding so I flipped it around but I still get it. Any advice?
The S on the interior? I'm no expert, but my best guess is it's just using whatever filiment it has to fill in the structure of the interior (as opposed to leaving it hollow)
We're all 3D printers. Except the only filament colour we get is brown.
Why thoooo?! There is more waste in this print than there is product!
:0 I SEEE OM NOM!
THE GREEN BLOB LIKE GUY
AHH
Ooo.. The green "cut the rope" monster... Miss that one the nostalgia hit 😅
Could you use the printer poop as packing cushion when selling products
would just end up in landfill
I guess but they would just throw it away
if he has the money he should use a 3d printer poop recycler (it melts it into filament)
That’s one hell of a risk to take, hats of to you for trying
How do you recycle the waste?
Watch on loop for 9494 years
How do you recycle filament like that
"The prints are looking good so far . . . SUPERMAN"
I only make functional and highly decorative prints now. No more useless knick knacks and small figures that wastes space...
I love how the stuff that comes out the back of the machine is just universally known as poop by all 3D printing channels
Did you use what you learned from the towers you printed earlier to reduce the poop?, seems like lot of poop?
I love SpongeBob and Om Nom Prints they are my absolute favourite
Hey what printer is that?
Melt the poop!
How do you recycle it? I have X1-Carbon ❤
Om nom my fav. childhood game
In the bambulab slicer you should be able to reduce the amount of filament that it extrude each time it changes color you should do that you’ll waste so much less filament
I want the om nom so bad
Fill that material in resin then turn it on a lathe would make for some interesting creations.
Can you show us the recycling
Yes
he can't, because there is almost nobody that do this, there is way to many difrent colour's and composites, so whay you get out of ♻ is a mix of everything, and you can't control the fillament then, what you get out the other end is completely unknown...
@@brianwgDK
Recycling is different that color right
Stefan from CNC kitchen has multiple videos on this and most of them ended well stop trying to be a party POOPER@@brianwgDK
Forbidden spagetti
The next product Bambu will release will be a poopiecycler to turn those turds into new filament. It looks like they will be selling a lot of those in the future.
Superman seems to have some compressed layer lines though.
Wow. How much longer does a multi color print take instead of a single color print? May i include your video into my next reaction video?
bro i want that printer sooo bad
That oddish and horsee will be great i know it
Why not use purge-to-infill or do the prints separately to save filament???
hes doing an experiment to see 12 colours stop giving advice mr know it all
@@miciagaming7323 it appears to be a question. Calm down sparky
I love omnom
I have an x1 carbon too neat
There are plenty of videos on CZcams explaining how to fine tune the Flushing Volumes to reduce waste...
What did you do for the black?
My homepage has a filament machine for processing waste materials😂
100 th but that superman looking sharp
I wonder if you could figure out a way to fill the inside with the excess filament.
Dunno if this for purely for testing but you don't want 12 filament changes happening on each layer. It's way less wasteful and faster to print these models separately, including slicing plate with multiple of them but set to be printed one at time, although you won't be able to put many due to required printhead clearance, however ~5-8 models should fit.
The ultimate system would be to have a spoil on the side and have create filament onto it.
6 days of printing
curious what filament and profiles you use, i cant get anywhere near that quality on my x1
I wanna have bed made out of the scraps
My favorite is cut the rope guy
Where did you get all these awesome files btw?
Some off thos do look really good and smooth do you have it set for 50% speed or normal
There isn’t any recycling center in the United States that can recycle used filament.
Unless you melt it down yourself and pour it into a mold
The Seahorse ends up not coming out right And Patrick having pink hair
Have it purge into infill and It will help a lot with poop
The seahorses get a fall over and be messed up
Let’s say theoretically the pip/x1 when the pooo get in the bucket it’s conveyed to get melteded and turned into filament on the spot
That would be something.
then you would need to put the x1c on a giant pole@@MihaiDesigns
Could you make a poop shoot from the bin off the side of the table. Like a poop slide to a larger container?
I wish I had the money for a P1P, it looks so cool
its an x1 carbon and also p1p doesn't do multi colour but p1s does just saying maybe you should research more if you're interested in it
@@miciagaming7323dude why do you have to be such a know it all? As if I would blindly buy a lifetime investment
first of all you literally said "i wish i had the money for it" second, i told you what it was. if you really hate info that much maybe don't put in in a public comment section. 600 bucks is not a lifetime investment.
@@wayverleesoulsong i'm certain you actually don't care about it at all and think "wow this is cool"
@@wayverleesoulsong i also didn't mean it in a "ur not smart" way
Close the dorr
Can you 3D print a poop shoot to make it easier to get
Imagine having a failure after 5 days and being 3/4 of the way done. 😂😂
That would be hilarious. But imagine if it didn't and then you could watch the last 1/4 print in the last 1/6 of the time remaining. Now that would be amazing!!
still finding some way to use tpu on ams
whoa. that many days?? how about printing one thing at a time would that be faster?
How do you deal with the copyright issues when you sell those?
Broooo noo, those kinds of 3D printers do best one at a time.
its meant to be a test
I wonder if you could just do 10 layers of one mode (assuming it's monochrome) and then do 10 layers of a different model. Wouldn't there be less waste?
In the settings you can change it so it uses the waste as infill, why not do that?
How are you printing without purge towers?
I don’t get why multicolored, but same filament purge isn’t just used to create infill?
Melt the poop MELT THE POOP
I have too Bambu Lab 3D printer
You should make a arduino colour sorter
can't you print as infill instead?
3d printer poop can be melted into easy boxes with fire and wood everyone should make a plastic melting box mold and juat smoosh and heat with heat gun
How many and units do you have?!?!
Where, who, how do you recycle?
Did you print all of those at same time
How to you recycle all of that?
How to reduce waste?
Where do you recycle? Pls tell ❤
What Gold is that on the red birds feet?
Where do you recycle pla
Do you have my dream 3-D printer?
Was anyone worried that it wasn’t going to recycling
We should recycle the poopoo
honestly dont care
Why do you do so many different colored prints on the same print?
What file did u print this with? Like what’s the name of
What printer is this
Lmao forgot to take out the poop 🤣🤣
And my dream life
Hey man, I have an idea for reducing poop waste. When I change my filament, I do it just as my printer hits 210°C. The material is barely heated and pulls a majority of it out, Maybe you can try to find that sweet spot temperature that allows most of the filament to come out during the change.
or he can buy a proper 3d printer poop recycler yes those exist no you arent an inventor
Why the S on superman is so deep.