Yamaha Jog RR 94cc Polini Big Evo - First ride - FAIL!? - Cold start

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • Setup
    Cylinder. Polini big Evo 94 cc
    Crank. Malossi MHR BigBore
    Bearings. Polini.
    Ekshaust. Polini Big Evo 94 cc
    Carb. Polini 34pwk.
    Reed valve. Kawasaki 85cc Vforce
    Ignition. Stage 6 Rt.
    CVT/Variomatic Polini High speed Evo.
    Clutch. Stage 6 Torque.
    Bell. Stage 6 Rt.
    Pulley. Malossi Or.
    Belt. Malossi Or.
    Gearing. Stage 6 14/41.
    Gear Cover. Malossi MHR
    CTV cover. Polini Big Evo
    Torsen Wd. Polini.
    Rims. Benelli 491
    Tyres. Baddlax
    Front suspension. Malossi F36.
    Rear suspension. Malossi RS1
    Radiator. Twenty mx.
    Future opgrades
    Malossi Rs 24 Rear suspension

Komentáře • 52

  • @eimantasme
    @eimantasme Před 3 lety +13

    I remember when the throttle cable came off from the carburetor as I went through a puddle while racing, the RPM's went higher than 13000, it sounded terribly, I immediately switched off the key, but it didn't respond to it, glad there wasn't any traffic in front and I stopped in time to bug it off..

  • @noeltn6912
    @noeltn6912 Před 3 lety +9

    What a beast!!!

  • @killuminatii1
    @killuminatii1 Před 3 lety +11

    Thats why a killswitch is very important. Especially when you are in traffic.

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety +3

      Yes, if I didn't have that killswitch, it would really suck with a stuck throttle!

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety +1

      @Hyacinth Behm No one gives a shit 😆

  • @Bullet-yz4cv
    @Bullet-yz4cv Před 2 lety +1

    Full Power Amazing

  • @jenny-masterchef
    @jenny-masterchef Před 3 lety +2

    it happend to me once when it was too cold,throttle just got stock.luckly it was no traffic.

  • @rasmuspetersen433
    @rasmuspetersen433 Před 3 lety +2

    Damn thats a insame jog bro😂🔥😍

  • @user-mutamuta.official

    Fast and cool! What kind of modification are you doing?

  • @2TLifesTV
    @2TLifesTV Před 3 lety +1

    Nice bike brother cheers!

  • @R_T_Remko
    @R_T_Remko Před 3 lety

    Nice suspension!!!

  • @jerijeremy4979
    @jerijeremy4979 Před 3 lety

    Ajib bro

  • @paulflood4420
    @paulflood4420 Před 3 lety

    How do u read the temp cht or coolant pipes

  • @paulflood4420
    @paulflood4420 Před 3 lety

    What subframe u use

  • @ApriliaSR50Customs
    @ApriliaSR50Customs Před 3 lety +2

    Is the temp sensor placed on the cylinder head?

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      The big Stage 6 multimeter has the sensor placed in the head, that small stage 6 temp gauge has the sensor just after the radiator so I can watch the temp when it has passed the radiator :)

    • @ApriliaSR50Customs
      @ApriliaSR50Customs Před 3 lety

      @@reimer7fpv945 what do you think about the ~40celsius and do you know whats the normal temp range in which the kit is most powerful and in safest state

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      40°c is a bit to low, but it's not gonna hurt the engine, around 60°c is where most Alu cylinder kits make peak horsepower. In this cold Danish weather I'll never get it to 60, but in the summer i think the two big radiators will fit perfect for this setup👍

    • @ApriliaSR50Customs
      @ApriliaSR50Customs Před 3 lety

      @@reimer7fpv945 Exactly. I am not sure whether running a colder engine than normal will hurt it or not but I think you lose some power. The kit delivers its full potential at 55~60celsius. If I was you I will block as much surface as needed of the second radiator to keep the temps in range.

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety +1

      It's not gonna hurt it, and I'm not gonne drive it in the winter time, only a quick test a couple times, so it's fine.
      When its time to go to the track again I'll block it off if needed :)

  • @rasmuspetersen433
    @rasmuspetersen433 Před 3 lety

    My throttle on my Gilera stalker Got stuck too, then i drove into a Street Light, and smashed my leg because it was very cold and ice everywhere...😂

  • @randyspits6751
    @randyspits6751 Před 2 lety

    What for jetting do you use with the 34 polini pwk ?

    • @reimer7fpv945
      @reimer7fpv945  Před 2 lety

      About 180 main, i dont remember exactly, but 180 - 190

  • @danikappe3070
    @danikappe3070 Před 2 lety

    37.8 c... too cold

  • @farveel1921
    @farveel1921 Před 8 měsíci

    hej hvad hedder dækkende?

  • @trainell
    @trainell Před 3 lety

    how did you get it stripped down like that

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      It's just missing the rear Fearings/Plastics in this video. So thats why It looks naked, you can watch my newest video to see how it looks now 👍

    • @trainell
      @trainell Před 3 lety

      @@reimer7fpv945 looks mint, i’m trying too do my RR with a 70 kit but i’m not sure what mods i need too support it so it doesn’t blow up, any suggestions?

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      @@trainell Most i portant thing is a high rpm crankshaft and some good bearings, and of course that it's proper put together, make sure the clearence in each side og the crankshaft when installed in the block is the same. There is a LOT of videos here on yt that shows how to do it the right way :)

    • @trainell
      @trainell Před 3 lety

      @@reimer7fpv945 do you know if the 100cc aerox is any good

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      @@trainell Are you thinking about the 100cc Roost kit for Aerox?

  • @TEAMVISKAT81
    @TEAMVISKAT81 Před 3 lety

    hehe kom der en lille pølse i den underbukser da gassen satte sig ;) og fin jog r

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      Haha ja en bette en 😅 Takker 😁

    • @TEAMVISKAT81
      @TEAMVISKAT81 Před 3 lety

      @@reimer7fpv945 det kan jeg sku godt forstå, har prøvet at gassen satte sig, er ikke særligt sjovt, jeg nået ikke at trykke/hive i dødmans knappen, så fik en tur i jorden :P

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      Nej det er bestemt ikke rart 😁 Hvor skod, det er træls når man ryger i jorden pga sådan noget! Har brækket mit kraveben på en pitbike hvor gassen satte sig, der kom jeg 3 - 4 meter op i luften og ramte hård jord med skulderen først 😅

    • @EmilQuistDK
      @EmilQuistDK Před 3 lety +1

      Lækker kølersystem 👍🏾

    • @reimer7fpv945
      @reimer7fpv945  Před 3 lety

      Tak Emil 👌👍