Aprilia Sr 50 - 28.9 WHP Polini Big Evolution 94cc
Vložit
- čas přidán 12. 09. 2024
- Almost Done and Ready to Ripp!!
Aprilia Sr 50 LC DD
Cylinder - Polini Big Evo 94cc
Ekshaust - Polini Big Evo
Carburetor - Stage 6 28mm PWK
Ignition - Stage 6 Rt
Variator - Polini High Speed Evo 16mm
Crank - Malossi RHQ
Clutch - Stage 6 Racing Tourqe control
Gearing - Stage 6
Oh, sad about the audio mute in the beginning. This looks like a cool setup :)
CZcams removed the original sound track, så thats why 👎
@@reimer7fpv945 Yeaah :)
We all been there :p
Nice Bike Bro 🔥🔥
Tune r brake lever nice.i have also but i change the position of the brake tank.
How were you able to use a rear mounted carb? Did you make a new subframe?
I really love the engine, I respect that, I only dont like the handlebar cover delete and mudflaps... other then that. very nice
Fair enough, I don't like the mudflaps myself, but I do like the look with the cover, I just don't have it, thats why I went with the naked bars 👍
@@reimer7fpv945 Ohh that makes sense
Yeah, a new set of bars is cheaper than the original plastics alone. And I think it looks quite nice after all :)
hello what brand is your downhill handlebar, on which website did you buy it? Thanks for the answer
Sorry about the late answer, i dont always see the new comments. I bought it at speedline.dk a Danish website :)
does anyone know where i can find the smoked headlights and flashing light
You can buy paint that are made for making headlights darker, mine are just painted
@@reimer7fpv945 thanks
hey bro what gear ratio are you using?
what manifold did you use?
how did you get on a new board?
which board? :)
what air filter
Hey there, what was your setup for the carb jetting? I'm building one right now and having a tough finding where to start with the carb jetting sizes. Thanks
Sorry about the late answer! But start at 156, and then go down until it runs right at full throttle, then change spark plug, ride for at least 30 minutes, and check the plug, if it's a nice light brown color, then it's good.
After that ride with half throttle and if it runs good there then leave it, but if the ride is rough and it sputters, then try to take the needle down a nudge, cause it will properly get to much fuel at 50% throttle, they almost always do that from factory.
And the idle jet, if it only idles with the choke, it's not getting enough fuel, and if you get a lot of fuel out of the exhaust at idle, it's too Rich. So you need to find that sweet spot in between that :)
For instance, you can see in the video that mine is way to Rich at idle at that time, the ekshaust is all greasy from the gas and oil.
I can't remember my idle jet, but my main is a 148, but still a little to Rich. but it runs very good 🤘
@@reimer7fpv945 Awesome thanks alot! I was starting at a 110... so it just kept dying after id accelerate for a minute. Just ordered jets around the ones you have so hopefully it works thanks again.
You're very welcome! You can always ask if you need help, I'm happy to help! 👌👌
Hvad ruller har du i?
Kan sku ikke huske det præcis, noget i nærheden af 3.5 mener jeg
What's your top speed?
what is that song you used? nice sr btw
Fugazi by Benny Jamz. Thanks mate 👌
hvor i dk bor i lige, siden i kan køre rundt på skam tunet scooter :P for kan jeg sku ikke på min zip :P
Jeg bor selv i byen hvor jeg ikke tør, men værkstedet ligger på landet, så når de lige skal testes sker der ikke noget ved det 😁
What things u changed in your sr?
Everything! Setup in description :)
which application did you use to show speed ?
Gopro Hero 6, 7 and 8 has build in GPS 👍
@@reimer7fpv945 thanks
How much did it cost to build?
Around 40.000 DKK/5.400 Euro
75% of that used on the Engine alone :)
Hvad skal du ha for det sliks fordæk vis du er intra i at sælge det
Du kan købe begge fælge for 400 :)
@@reimer7fpv945 skal kon bruge det sliks fordæk DSV vis det kan lade sig gøre
@@reimer7fpv945 men okay begge for 400
Kan du sende en besked på fb og lidt billeder
is it a ditech or carb
Carb. 28mm pwk
How do you put the sport steering on?
I'm not sure what you mean? :)
@@reimer7fpv945 Where did you found an HANDLEBAR STEM on Aprilia sr 50?
Speedline.dk Danish website
Er i fra Hvilsom?
Nej bor i Aars, køre dog i Hvilsom der (:
@@reimer7fpv945 ok fed
What's your top speed with that bore kit?
Tops out at around 130kph (80-90mph) But its still to low geared.
@@reimer7fpv945 yeah I was gonna say you didn't mention no transmission . So that thing would hit 100mph+ when trans is upgraded. I have a sr50 but kinda scared of going 94cc (me doing it my self ). If you dont mind me asking , how much $ everything came to?
Yeah, I'm thinking around 100mph on the road should be easy, and 120+ on the dyno.
Its probably around 2.500$ for the engine parts only :)
And its not hard at all to fit the 94cc to the block, it takes some time to mill out space for the crank and cylinder, but its not hard at all. I just did it and it works perfect, and I've never tried it before I build the Sr50 :)
@@reimer7fpv945 thanks man appreciate you explaining it . That's motivates me to do mines
Top speed?
Tops out at around 130kph (80-90mph) It still needs a higher gearing to get higher topspeed and acceleration
@@reimer7fpv945 its nice bro my its original and tops around 95-100!!
Thats fast for original! 👌👌
@@reimer7fpv945 yah now i will put it on 95cc
Haha, that's understandable 😁