WHY DOES ATV CLICK WHEN TRY TO START IT // Suzuki Eiger Starter Fix
Vložit
- čas přidán 30. 01. 2020
- In this video I show you how I had a problem with my ATV not starting and how I fixed it. Watch more videos on ATV's by clicking here: • ATV Repair Videos DIY
***Subscribe to this channel: / @gettingitdonenorthof7
***ABOUT THIS VIDEO:
If you were having the same issue as I was and you were wondering why does ATV click when try to start it then I likely have the fix for you!
When I tried to start my ATV, nothing would happen and I would only hear a clicking sound. So I went through a few diagnostic checks before coming to the conclusion that I had a starter problem.
After removing the starter from the my Suzuki Eiger I disassembled the starter. Inside was a lot of dust like material which came from the starter brushes. The brushes were wore out, especially one of them. I cleaned the inside of the starter of the dust and ordered new brushes.
When the starter brushes arrived I then installed them in the starter and assembled the starter back together. I then installed the starter back on the Suzuki Eiger and it started immediately.
You can buy these starter brushes for a Suzuki Eiger 400 here on Amazon:
*Amazon Canada: amzn.to/3iI8ecT
*Amazon US: amzn.to/3sqFgUg
If you have a different make and model of ATV, be sure to see if you can find the part on Amazon! Lots of times I can get parts cheaper on Amazon or Ebay, even with the shipping cost.
-----------------------------------------------------------------------
***Watch More ATV Fix & Fun Videos Here:
- WHY WON'T MY ATV IDLE WITHOUT DYING // Suzuki Eiger Fuel Petcock Fix
• WHY WON'T MY ATV IDLE ...
- WHATS A GOOD SNOWPLOW TO BUY FOR AN ATV // Easy To Use & Worry Free
• Whats a Good Snowplow ...
- FAST SNOW REMOVAL WITH AN ATV // Huge Driveway No Problem
• FAST SNOW REMOVAL WITH...
- ATV ROMP THROUGH THE NEIGHBORHOOD // Lake To River & Firewood
• Video
-----------------------------------------------------------------------
***LET'S CONNECT:
Facebook: / crowelake
Getting It Done North Of 7 Instagram - / rolandnorthof7
Thank you for watching this, why does ATV click when try to start it video!
Feel free to leave your questions and comments below, I am happy to help.
- Roland
You Don't Have To Get It Right, You Just Have To Get Going...
Disclaimer: This video may contain affiliate links, which means that if you choose to make a purchase, we will earn a small commission. Please understand that we have experience with these products, and we recommend them because they are helpful and useful, not because of the small commissions we make.
***To replay this video: • WHY DOES ATV CLICK WHE...
Disclaimer: This video may contain affiliate links, which means that if you choose to make a purchase, we will earn a small commission. Please understand that we have experience with these products, and we recommend them because they are helpful and useful, not because of the small commissions we make. - Jak na to + styl
Please leave a comment if this video helped you with your ATV. You can also watch this video where I had fuel petcock issues with my ATV: czcams.com/video/xOiORl-roiA/video.html
drop your petcock $100 + part, swap with a raptor 660 model on/off/reserve old school gas valve for $10 (other models have the same fit as well), just plug your vacuum line with an electrical wire nut. working now no problems for last 6 years
Good fix, nice job showing the process of isolating the starter and rebuilding it.
Thanks for the great video and advice. I too had an issue with a single "click", coming from the starter solenoid (on my 2003 Bayou 250). I watched your video and all the other starter/starter solenoid related CZcams videos available and was convinced that I had a bad started solenoid based on the videos and the fact that the single "click" sound came from the solenoid, not the starter. There were numerous aftermarket starter solenoids available on Amazon for around $10 xo I figured I would try the least expensive and easiest repair (compared to replacing the starter itself) first...what a hassle! I bought and returned starter solenoids from 4 different sellers due to the "B" (for battery) and "M" (for motor) being on opposite sides from what the description pictures showed and that the description clearly stated the solenoid was compatible with my specific ATV...maybe it doesn't matter? I don't know though because it turned out that the single "click" coming from the starter solenoid was actually caused by a bad starter. I replaced the starter and everything worked fine, even the original starter solenoid.
I have a 2015 Suzuki 400 Quad Runner with the same symptom, clicking at the solenoid. I was looking to buy a new starting motor, however my year/model Quad Runner requires a much more expensive starter than pre-2011's models; $360 ouch. After viewing your video, I ordered a new brush kit for a fraction of the starter cost. I just finished the starter re-build. When I opened it up it was loaded with fine black powder. After cleaning as you described and re-installing, she starts right up. The hardest part of the job was trying to figure out how to twist and rotate the starter to clear the tailpipe. Thanks again for the great video.
Wow that's great to hear! Made my day.
Thank you very much for your time making this video. Great tool
Good seeing you again, thanks for the ice fishing and the morning trip. Glad to see you have the ATV fixed and running. See you and your family in about two months. Woody & Marilou
HI Marilou, we miss seeing you both. Thanks for watching the videos. Hope you enjoy them. That ATV has given me a ton of grief this year. I think it's time for a new one around here. Take care, say hello to Woody and the family for us 😀😀
Thanks. I have kids dying to ride and you saved the day. Easy fix...just needed a point in the right direction. Was able to clean up my brushes and the starter housing. That got it working for now, new brushes ordered.
Glad it worked! What type of atv do you have?
@@GettingItDoneNorthOf7 '07 Suzuki Ozark 250
Thanks, we have two ATV's (a 94' polaris 400 2x4 and a 05' Eiger 4x4 and both starters went out. The brushes are a lot cheaper than two whole starters. It's seams like they always break at the most opportune times to.😄 Thanks a lot, saved us a lot of money.
Good stuff!
Thanks for the great video and advice. I too had an issue with a single "click", coming from the starter solenoid (on my 2003 Bayou 250). I watched your video and all the other starter/starter solenoid related CZcams videos available and was convinced that I had a bad started solenoid based on the videos and the fact that the single "click" sound came from the solenoid, not the starter. There were numerous aftermarket starter solenoids available on Amazon for around $10 so I figured I would try the least expensive and easiest repair (compared to replacing the starter itself) first...what a hassle! I bought and returned starter solenoids from 4 different sellers due to the "B" (for battery) and "M" (for motor) being on opposite sides from what the description pictures showed and that the description clearly stated the solenoid was compatible with my specific ATV...maybe it doesn't matter? I don't know though because it turned out that the single "click" coming from the starter solenoid was actually caused by a bad starter. For me, the final clue was that I couldn't "jump" the starter by connecting the solenoid terminals with a screwdriver. I am sure that there are other more exact diagnostics I could have done with a meter but I replaced the starter and everything worked fine, even the original starter solenoid.
@CountryStranger There is some conflicting opinions on the different forums on what it means if "jumping" the solenoid doesn't work but I think it makes sense to try the solenoid first as that is the less expensive way to go...good luck with that though as I had a hard time getting the right part on Amazon, even when the pictures were identical to OEM they came in with the "B" and "M" terminals on opposite sides from what the pictures showed (like I said previously, "Maybe it doesn't matter?"). Even after finally getting the right solenoid, it still wouldn't jump so I changed the starter and that fixed my problem and my Bayou is still starting strong since then.. I hope that it does turn out to be the solenoid in your case. Let me know how you make out. Good luck!
Great fix!
Thanks I am sure this is my problem and i will work on it after thanksgiving.
A very well done video.
Thanks a lot that helped me a lot
great video, thanks
I have a four wheeeler its making a clicking noise and I have a wiring harness for it but its still clicking not even trying to start at all what do u think is wrong I slide out jumper cables to the battery?
Thanks for the video
I have a quad and it was running earlier in the day it will continuously click but not start the lights work and the lights for neutral are bright
ATTA BOY
Nice explanation
Nice fix brother and great job !
Thanks Ron!
Good, straight forward video.
Thank you 😊
nice video by the way, to the point
Thanks for the video. I have the old 2005/6 Eiger. When taking off the starter I had to tap it out from the other side because it was in so tight. The gear was fine not worn at all. The brushes were completely gone. So I’m ordering them. I’ll let you know how it goes.
I ended up ordering a new starter. The replacement brushes were $30 and the new starter was was $34. It was a little larger diameter and I had to take the plastic cover off the throttle spring housing to get it in. It started right up. I’ll rebuild the old one for a backup. Thanks again for the video.
Thank u fixed it
How much did you pay for the brush when you got them? I checked mine and it’s the same problem but the link you provided no longer has the item available and I just wanna make sure I’m not scammed out of my money
good ideas
Thank you for sharing your videos. They are very informative and detailed well. I have a clicking won't start issue going on at present. If the starter brushes are bad would it make the relay under the seat click when you try to start it.? It has never done this before, I just replaced the carburetor on it and have never had trouble starting it before. I went to start it with a full battery and all I got was the clicking from the relay under the seat.
Yes, if the starter brushes are bad that would cause the relay to click but nothing happening at the starter. Try tapping the starter with hammer.
My 400 Eiger would/will not start but clicked. It would start with the manual pull so I guess its the starter brushes getting worn is the cause. Thanks for reminding me as I did the job a few years ago.
Sounds like your starter. Get a piece of wood and hammer. Tap the starter while someone hits the start button. It might start. But you will still need starter maintenance
had this problem, i though it was moisture from rain. I took my seat off and after 10 mins it started. i cut it off about 10 time the last few days...now its doing it again.
I had a question, I'll probably just try it...I can jump the starter with a screw driver and that will let me know if its the brushes or starter right?
Trying to locate sylinoid for Suzuki squad runner 250. But has the 300
How often do I need to change the think pos starter
Thanks mate got the same problem with my Suzuki quad runner now i dont need to take it to the mechanics
Hello, watched the Suzuki Eiger starter video. I was unable to find the link to where you found the new brushes. Can you send me the link?
Hello, if you're in the US, you will find this part on Amazon with this link: amzn.to/3sqFgUg
Thanks for watching!
Great I will try
All the best
I just found your channel . Excellent videos you are making . Just going back and plan to watch all of them . Friendly down to earth people I see . Where abouts in Canada are you from ? I'm from Niagara Penninsula .Won't belong before you hit 1000 subs . Keep up the great work . Channel has lots of variety . From bulding , fixing things to canning and cooking . Take care .
Hi there and thanks for your support! Also thanks for the kind words. We live in Ontario as well not far from Peterborough. Thanks again, have a great evening!
Cual es la función de el relay 3875031 G00 de Suzuki king quad 4×4 750 2010
Does the ground wire sit on one of the mounting bolts? or does it mount on the starter pin?
and if it is on the mounting bold, does it go on the side that squeeze's together with the frame? or the outside of it only touching the starter
hi i have a suzuki quad which was clicking and nothing else when i tried to start it,,i replaced the startewr relay and the starter motor but it is still just a clicking noise...no cranking.
when I add in a battery charger to the battery(which is giving 12v) I can hear the startyer motor whirring but there is still no cranking,..What do I try next??? Help
Did you figure out the starting problem to your quad, I have the same issue?
I know this video is 4 years old but do you happen to know the part number for the brushes for the Suzuki Eiger quadrunner. I have rebuilt mine from the ground up it is the best toughest machine ever. I've had this problem for a year or so and just never got around to it because it's so hard to find the right stuff for the model and Suzuki is quite expensive. And with a pull string that starts very easily it was never really an issue but now that I got everything up and brand new I'd like to get that if you had the part number or the link to Amazon or wherever you get it I get my parts through Suzuki.
@@Candi_gaming Hello, there is a link in the description of the video that takes you directly to the part on Amazon
Just lightly tap it and then it will start and that's how got my quad back up running in good order and it has no more issue and lucky Ive bought a spare starter reley and now I'm just waiting for my new tires
Does someone have to be clicking it while you tap it or no
@@nicky_9791 No
What kind of click was it mines like buzzing
I will leave all the mechanical work with you! It's still all Greek to me 😋😋😂😂 😂❤️❤️❤️
Not a problem, just pay my gas, food and lodging and I will fix it for you. Lol 🤪🤪
@@GettingItDoneNorthOf7 LMAO! The food no problem as I would cook awesome meals! You and Beth should get a small camper and come on down! ❤️😁❤️😁
Mine doe sent click it wines and wines until it catches sometimes and starts - Suzuki quadrunner 250 wore brushes maybe?
Sounds like it!
What if there is no click at all? Lights on so not battery
I have similar quad. Starter clicks won't turn engine starter test fine out of engine. Does start rope start. It's like engine stuck is how starter acts loud clunk. Both starters used and the new one. Has ground and power to where it all needs to be
I have the same problem did you figure it out
Thorough I like that as I'm just a young girl trapped in a little ol lady's body! Thanks
I click the push start and it clicks 1 time and my battery fine because my head light works do you know what could cause that?
SAME THING HAPPENING TO MINE! what was wrong with it?
@@thatboytrenton1919 I bought a new starter and it fixed it lol
@@spiral-editz9313 lmao i just took mine apart cleaned it and now it runs lol
Good mine caught on fire earlier lol it back fired through the carb
Came for the video subrscribed for the Chanel name lmao
Great thanks buddy 😀
Mine was the battery
I really hope it’s just the battery for mine because I don’t want to replace thebstarter
I have one of these. I wish it was a honda ! What a pies of shit
But great information ! Thanks
All brands have issues. I worked thru a few issues and now it's working great again. Good luck with yours
I bought one new in 2002..have over 20 000km on it, bulletproof..used in rough Canadian bush trapping and hunting
@@kevinfinlayson3617 still not a honda.
Owned many. No problems.i did get it fixed, working great now 👍
lol
lol p