I bought a Chinese-made quick replacement tool stick, In the video,I showed the difference between them, how to install and a precise and easy way to adjust.
VERY helpful video! - even without narration. I liked how clearly you showed each part, what to use it for and how to mount it. The tips for using a drill chuck to install the stud and for how to set the proper tool height were also very simple and practical. Well done! Thank you!
I bought a couple blocks 5 of them none were egual in size , but a bit machining and it all works perfectly , bought some dixon blocks , same story with measurements.
Před 6 lety+2
Seems very intetesting. Height adjustment is a great feature. I have used old machines without height adjustment and it takes sometimes a lot of time to find suitable filler plates under the blade.
Thanks a lot for Your video! I'm just heading for the same stuff to my ordered mini Laith. Not knowing enough I have bought a set of tool holders that is one size smaller than the QCTP You show. Now buying the -001, -002 of the proper kind.
Hello my friend, I have the same QCTP for more than a year, and it's an excellent product, but am worry about this little delicate movable wedge-gibs just in case that will broke, where I can get it as a spare part. If you have any idea who may provide this... Thanks for the nice video.
Hi the original castle of my lathe measures on the base 63mm x 63mm and banggood can't tell me if the qctp 250-000 fits my lathe do you believe that this model fits around me or should it be another model ???
I just got mine today, I got mine from Discount_machine off of Ebay. My OXA model (for mini) was about $122 shipped. I know there are cheaper ones and I believe they are the same maker but some have had issue's with the attachments being the right size but I haven't seen anyone saying that about the Shars brand that Discount sells.
This just might be one of the best videos for the begining enthusiast. Thank you!
oooh. That height adjustment trick with the strip. That's awesome.
I have been searching for hours trying to find what the tool post and tool holder numbers were. You did it PERFECTLY, Thank you 🙏 Michael 🇦🇺
VERY helpful video! - even without narration. I liked how clearly you showed each part, what to use it for and how to mount it. The tips for using a drill chuck to install the stud and for how to set the proper tool height were also very simple and practical. Well done! Thank you!
Super helpful... clear, concise and effective guide. Thanks!
I have this tool post and I would NEVER go back to the old style!
Love the clever method to get the cutter height spot on. Will adopt that .... thank you 🙏
I bought a couple blocks 5 of them none were egual in size , but a bit machining and it all works perfectly , bought some dixon blocks , same story with measurements.
Seems very intetesting. Height adjustment is a great feature. I have used old machines without height adjustment and it takes sometimes a lot of time to find suitable filler plates under the blade.
Thanks a lot for Your video!
I'm just heading for the same stuff to my ordered mini Laith.
Not knowing enough I have bought a set of tool holders that is one size smaller than the QCTP You show. Now buying the -001, -002 of the proper kind.
Just ordered this QCTP. Thanks for the video!
That actually helped me a lot. Thank you
I have one of these 250-100 on my C2 mini lathe an am VERY satisfied
thank you for the tip how to ajusting the hight of tool.
Cool Trick, can't wait to try it
Très bonnes explications ! Merci !
Very good explanations ! Thank you !
Brilliant! awesome tips in here.
always put were we can get one like a link good job
Great video, thank you.
Hello my friend, I have the same QCTP for more than a year, and it's an excellent product, but am worry about this little delicate movable wedge-gibs just in case that will broke, where I can get it as a spare part. If you have any idea who may provide this... Thanks for the nice video.
Thank you so much this is so relative for me I have a BXA one and my first lathe 12"x36" this helped me so much thanks!
Hi friend. I will buy the BXA too. Please, tell me ¿what is the most size tool that I can put on it?
Awesome I was thinking of getting one for my lathe and this helped my make my decision. Thanks or the video
merci super tutto
05:16 cool trick
Hi
the original castle of my lathe measures on the base 63mm x 63mm and banggood can't tell me if the qctp 250-000 fits my lathe
do you believe that this model fits around me or should it be another model ???
what grease is that? you said industrial grease but I can't find the same thing
Please can you tell me where to get one from
I just got mine today, I got mine from Discount_machine off of Ebay. My OXA model (for mini) was about $122 shipped. I know there are cheaper ones and I believe they are the same maker but some have had issue's with the attachments being the right size but I haven't seen anyone saying that about the Shars brand that Discount sells.
What about multifix? does china make good ones?
Hello
I don't find it on amazon...have you a link?
Thanks.
Any link where I can get that QCTP?
I'd like to get one for my lathe, what brand is it?
Do you have a link to where you got these from
What make and model lathe did you install this on
What model is this? where did you buy it?
Thanks for the reply, do you think this style is better than the piston style?
N
V