Step by step Replacing rear Brake pads and discs on Citroen Relay, Ford Transit, Peugeot Boxer
Vložit
- čas přidán 25. 11. 2019
- This is a guide to show you the full video of how i replace the brake pads and discs on all of these van models. these van models have the same brake system and parts (depending on van load) so you can follow this guide to help you learn or just understand how the process is to replacing your rear brakes, including the adjustment of the handbrake shoes..
Excellent video, learned a lot. Thank you very much
Great video, just learned how to replace all the brakes on my Citroen Jumper/Relay, I was scared it would be way more tricky but you just made it look so simple. Subscribed
Best video I seen about breaks
Spot on mate , good detailed vid for everyone 👍
I was doing 1 the other day were the customer left the handbrake on while driving , got so hot it melted the abs sensors
Fantastic work.. patient, detailed, well filmed with very understandable instructions.. Big Thanks!
Great video guys . Did my own pads only and saved a few quid thanks to this vid
Thought I needed to buy a Calliper wind back tool, appears not. Thanks, really helpful video
Thanks very much, very helpful
very nice video, very good thanks a lot
Great video thanks a lot! Are there any major differences for the front discs and pads - my front discs have collapsed so need replacing. Cheers
Well done. Thanks.
Good Job
Great video thanks
Well done good video are shoes easy to change like pads
Great help but we’re also changing hand break shoes. Any idea how the extender goes into the hand break cable? It doesn’t seem to be working. The issue we’re having is someone else took it apart so we didn’t get to see how the pin of the cable attaches.
The Caliber Bracket Bolts were coated with red loctite at the factory. Take a torch/propane to help loosen it. Otherwise... very hard to remove those two bolts.
excellent, thank you.
Are you using a torque wrench to undo bolts?
Great video thank you
Question - after you have put the new disc on the back and you are tightening up the handbrake is the handbrake actually 'ON' (Engaged) or not? (apologies if you did mention it)
Many Thanks
At 1:45 he takes the handbrake off :)
Good video, but irrelevant to my problem with my 2010 Dispatch, as it doesn't have handbrake shoes !
Handbrake cable operates a cam lever on disc pads - this was seized, but nothing a little good 'ole WD40 couldn't sort.
Is there any thing you can do if the cog inside the drum won’t turn to release the inner break
You could try spaying in some penetration oil. Be careful not to get too much in as it may affect the brake shoes.
Can I assume that it's the same process to change front pads only, (not discs) on Peugeot Boxer?
Yes pretty much the same only difference are the bolts you will remove for the calliper and carrier are very different and much bigger including 7mm Alan key and 14 or 16mm Alan key socket for the carrier. Also to remove the calliper once the bolts are removed you will need to tap using a hammer and chisel (or thin screwdriver) the slider bolts from the carrier. Very very easy once you know how. 🙂
How to replace kame shoft cancer boxer 2004
This worked but now my handbrake has stopped working properly
Nichts richtig sauber gemacht 😱
...but no mention of reapplying any locktight.....😕
I had never came across loctite on the threads of caliper bolts before - till I did my van today!
I put coppaslip on re-assembly and just made sure they were properly tightened up. At least it will come apart next time round.