Mr. I found your project incredible, congratulations. I want to know if you could help me understand how to place 4 floors. If anyone here can help me, I appreciate it, I'm a beginner. But I was impressed with the elevator.
@@oldBASgold Thank you for your attention! It is precisely the logic that I really want to learn! Unfortunately, I don't know how to add the extra line, I already put the button and the sensor. Could you help me? Then give me your email, I send my project. Thank you again.
The project is really great, sir ✨✨. I would really like to know your opinion on something, if possible. if i want to design the elevator to go up and down, should I use 1 or 2 motors ? Which is best?
Hi when I tried to make the elevator the elevator is not going to floor 1 only it goes to floor 0 and floor 2 . I have checked the buttons it's working good and the sensor there is no problem but it's not going to floor 1 please , it would be great if you figure out a solution for this problem
@@oldBASgold yes I did checked the wires and arduino connection there is no problem with the wires. It would be great if you put any changes in the code.
Great project dude keep going
Thank you 🖒
سو شكرا لك على الشرح
شكرا جزيلا
this really helped!! Thank you❤️
Thank you so much for watching and commenting ,i really appreciated
very helpful
Nice👍
Muy bien, gracias.
gracias
Thank you!!
Hope you like it
Mr. I found your project incredible, congratulations. I want to know if you could help me understand how to place 4 floors.
If anyone here can help me, I appreciate it, I'm a beginner. But I was impressed with the elevator.
Just add button and IR sensor and add extra line and change the name thank you for watching
@@oldBASgold Thank you for your attention! It is precisely the logic that I really want to learn! Unfortunately, I don't know how to add the extra line, I already put the button and the sensor.
Could you help me? Then give me your email, I send my project.
Thank you again.
Can I replace these sensors with limit switches?
Hi istaz, I didn't know how to do the motor and the motor controlar cables
You need to check the description
Hi is it possible for English caption for those who don't speak Arabic, would be easy to follow. Also do you have the theory of operation in English
did it work?
لما بحط الموتور في الجزء بتاعه في ال motorcontroler مش بيشتغل مع ان الموتور لوحده شغال؟
The project is really great, sir ✨✨. I would really like to know your opinion on something, if possible. if i want to design the elevator to go up and down, should I use 1 or 2 motors ? Which is best?
Its all about load ♥️
@@oldBASgold can you help me in my project
Incredible project and explination, really thanks sir, if i could please have the code?
Thank you, please Check the description below the video.
Hi when I tried to make the elevator the elevator is not going to floor 1 only it goes to floor 0 and floor 2 . I have checked the buttons it's working good and the sensor there is no problem but it's not going to floor 1 please , it would be great if you figure out a solution for this problem
Check wires , check ir sensors
@@oldBASgold yes I did checked the wires and arduino connection there is no problem with the wires. It would be great if you put any changes in the code.
And there is no problem in the sensors
مرحبا!
I did what you did and the 7 segment doesn't light up and when I press the button the motor stops completely and the motor doesn't start back
the sim problem
سؤال لو سمحت ،اذا بدي ساوي المشروع لكن بدون ما حط ازرار وادخل رقم الطابق عم طريق ال serial monitor ,شو الشي يلي لازم ساويه
وشكرا 🌸
بسيطة شغلي الموتر وبعد ٥ ثواني يطفي
لنفترض انو الموتر موصل على مخرج ٢ في الاردوينو
DigitalWrite(2, 1)
Delay(5000)
DigitalWrite(2, 0)
I´ve done exactly what you have done but once I pess the button the motor starts working and it won´t shut off. Do you no what I´ve done wrong?
Check your IR sensors it should stop the motor
فين فيديو part 1 ؟!
Where is the code
Check description
اريد اسخدام هذا الكود مع إضافة فتح باب المصعد ممكن المساعدة 🤗🤗🤗
Sir why I didn’t saw you push button
I couldn’t find the code in the description!
I will give you
لو سمحت بدي اعملو بحيث يعتمد ع الازرار وع الكلام اي في حال كان الشخص مو قادر يستخدم ايدو كيف بقدر؟
بدك تعمل سننسر عن طريق الرجل
ممكن توضحلي كيف عندي ياه مشروع ولازم اعملو لو سمحت
@@oldBASgold انا عم اشتغل عليه ممكن اعرف ال7segment ليش متشتغل صح ممكن اتواصل معك
Can I use stepper motor? thanks
Yes
@@oldBASgold same code I will use?
Yes
مشان الله رد
Can you please share the code
Can you sent me the code it doesn't open
How many software did you use ? Only arduino ide ?
Yes
Okay
Thanks for your answer, sir
سلام عليكم
اكو شرح الكود
وين الكود
السلام عليكم الاكواد غير موجوده فالرابك هل ممكن انك تحدث الرابط
🌷🌷
www.instructables.com/id/Arduino-Elevator
هل استطيع ان احصل على الكود
بصندوق الوصف
@@oldBASgold شكرا جزيلا
@@oldBASgold هل البروجيكت كان يعمل بشكل موحد ؟
ممكن اتواصل معك علي فيس بوك او واتساب؟؟
You can send me the code
Check the link in the description
انا حطيت الكود على اردوينو اون ورفض انه يشتغل
هل اشتغل معك في الاخر ؟
اخي الكريم كم من طابق في هذا المصعد
٣