Drift Art DA3S - 6 Bottles Drift 1.
Vložit
- čas přidán 27. 08. 2024
- Just some drifting laps with my RC.
#microrc #rc #drifting #rwd #porsche #934RSR #da3
About the car
Parts used for the project:
- Body: Revell Porsche 934 RSR - Martini
- Chassis: Drift ART DA3S New Generation Mini RWD Drift Chassis KIT (Without Motor Electronics) 99030
- Upgrade parts:
- DriftArt2 40T belt and 30T Gear For TDS Drive Shaft 97501
- Drift ART 7075 Solid Axle (Only for UX-CVD) 98570
- Long UX-CVD (+2mm each side than normal) 2 pcs Drift ART 97510 For DA3
- DriftArt2 Transformable Motor Gear #DA-GEAR-TMG
- DriftArt2 Drift ART S.E. Body Mount Set 98801
- DriftArt2 Steel Sandwich Gear 98503
- DriftArt2 Full adjustable servo seat DA-HUB-7075
- DriftArt DA3 Rear Arms Extension Parts 97512
- Drift ART Angle Master DA3 Steering Knuckles 7075 For DA3 Only 98201
- Drift ART Moon Walk New Front-End Dynamic System (Stock D-axis for Swing Arm Diameter 2mm included) 98300+96301 For DA3
- Electronics:
- Servo: AGFrc A11CLS V3
- ESC: Furitek CYCLOS 2S LIPO 20A/40A (Brushless, Sensored ESC) with Bluetooth
- Motor: Furitek Hellfire 1410 5500kv Sensored brushless motor
- Receiver:
GT55Racing FLYSKY NB4 NANO 4CH TOWER ANTENNA GYRO
#DSK-505
- Wheels:
- Front:
GT55racing 1/28 MINI-Z AWD BBS CNC Alu. wheel Gold ( 2 pcs)
No. 177
SKU: GT-BBS-GN05
Offset (2 pcs): Narrow+0.5
- Rear:
GT55racing 1/28 MINI-Z AWD BBS CNC Alu. wheel Gold ( 2 pcs)
No. 177
SKU: GT-BBS-GW015
Offset (2 pcs): Wide+1.5
- Tires: DS Racing MI20H-LF-4SNW (ID: 20mm OD: 26.5mm, 2 Narrow+ 2 Wide)
So nice! Learning Drift technique it's also useful in Rc Rally!
Thanks! Good to know.
Awesome
Thank you! 😊
Hey Griff I'm about to pull the trigger on a DA3S! I also want to do a 934 RSR, do you think you could share the setup and list of upgrades/tires you're using? Thanks!
Hey!
You can find some information about my build, and the used parts in these two video:
- Tips about the body, parts lists: czcams.com/video/qrU8KbBTlfY/video.html I've ended up not using all of them, but that also mentioned in the video, check the video description too!
- Some building tips, and part lists I've used for the build: czcams.com/video/ulJmI9YZ3rk/video.html Please check the video description too!
- Bonus adwise: If you are using wide+3.5 wheels (instead of wide+1.5) at the back you don't need the longer lower arm and the cvd extension to be able to achieve 84mm width at the rear
- Setup wise I'm using pretty basic setup (I don't have a detailed setup video yet.):
- front: toe-out: 4 degree, camber 5 degree, caster: 2.5 degree
- rear: toe-in: 0 degree, camber: 2 degree, -
- servo tilt: 5 degree
- servo arm: short position
- servo holders screws at the bottom: screw centers are 4mm from the front of the gap
If you need more help. Feel free to contact with me.
Some useful facebook groups, to get more help:
- Drift Art Guide&Share: facebook.com/groups/502454590891094
- Small scale drifters: facebook.com/groups/684712369357847
Did you decided the livery? Are you planning to do street or race version?
@@griffsminircdrift awesome! Thank you so much for this great information I can’t wait to build and drive this car! I have a DRZ MS, spent the last four months tuning it. I like it but it has some limitations and definitely won’t drift as well as what I see in your DA3S videos! Thanks again 🙏
Your welcome!
Don't give up on the DRZ MS. It's not easy to setup it well, but rewarding. As far as I know it is one of the great drift chassis even in competitive level.
Probably you already knew the group: facebook.com/groups/Atomic.DRZ (You can ask them for advice, maybe they can help a bit.)
Great GREAT setup info!! I will contact you if I have any issues. I love the Martini look, I also love Jäegermeister, I just can’t decide yet! I’ll keep you posted!
Hey, the measurements was wrong. I've fixed it in the comments now. Sorry for the inconvinience.
this rc can drift everywhere ? even on tar roads ?
I've never used on tarmac. It's working on tiles well if there are no big gaps.
It can work on concrete if it's smooth but it won't be ideal as the surface would be too grippy more of the same for tarmac.
The scale of the car is 1/24. So the surface should be smooth and not too grippy.
I'm using mine on a painted vinyl track which surface is much better for drifting than concrete or tarmac. (No tire wear.)
Do you make these for subscribers at all😏💚😊
Well, I'm also enjoying making them. :)
@@griffsminircdrift🤔🤔🤔. Love the content bud. Sorry it took me so long to sub up
Thank you! I hope there will be more content you will like.