I wanted to share what I learned. Taking a garden hose with a high pressure tip gets bristles spotless. From bottom of bristle out to top. Cleans them spotless. I found this out after hours of using a tooth pick digging hair and lint out of bristles. Takes about 5 mins to clean bristles brand new. Maybe you have tried it. Maybe not. But you will love it if you never done this. It’s absolutely amazing.
Sounds great, but that's a solution that requires much more resources for some people. And the fact you can't really perform this action year round (snow, ice, extreme heat, rain, etc.).
Nice that you found the problem👌I have seen in some cases the whole motor housing warped out of shape because someone has run their bagless vacuum too long with clogged filter(s). Motor in those cases has been running so hot that it caused the warping. Looks like this only needs that gasket fix.
Hope that problem is just that simple. You have great luck with curb finds. Before you found that loose bit I was wondering if it was a hose or even the suction relief valve stuck open.
do you ever take apart the cyclone? it's fairly simple to do and wif you're going to the trouble of disassembling everything I don't know why you would skip unscrewing 6 screws to take apart the cyclone itself. There are nooks and crannies in there that you can't see if you don't take the whole thing apart
@@VacLabI mean specifically for any of the hoover that have the "cyclonic assembly" that you refer to @5:00 . Have you ever taken the inner plastic cyclone/tornado apart? I haven't seen you do it in any of your hoover teardowns or cleanings
@@VacLab Thank you for the reply! I guess I can start taking it apart. Will it be self explanatory once I do? No one has a video up showing how to...... :( Is it worth it. It was a roommate I think who did it.
I tried to fix mine with the same problem but gave up when I could t figure out how to get into the thing. Now I just wind the cord around the vacuum cleaner.
I wanted to share what I learned. Taking a garden hose with a high pressure tip gets bristles spotless. From bottom of bristle out to top. Cleans them spotless. I found this out after hours of using a tooth pick digging hair and lint out of bristles. Takes about 5 mins to clean bristles brand new. Maybe you have tried it. Maybe not. But you will love it if you never done this. It’s absolutely amazing.
Sounds great, but that's a solution that requires much more resources for some people. And the fact you can't really perform this action year round (snow, ice, extreme heat, rain, etc.).
Nice that you found the problem👌I have seen in some cases the whole motor housing warped out of shape because someone has run their bagless vacuum too long with clogged filter(s). Motor in those cases has been running so hot that it caused the warping. Looks like this only needs that gasket fix.
love the consistency of uploads
Great video Bill just binge watching as been full one with gaming channel aswell as Kirby 👍👍
Your channel is awesome sir I like what you do very interesting
Thanks!
I’m actually surprised it’s still in good condition that is only a two year vacuum and they still make that vacuum I like curb find vacuums
I just bought mine last night, same model 😂
Hope that problem is just that simple. You have great luck with curb finds. Before you found that loose bit I was wondering if it was a hose or even the suction relief valve stuck open.
Im tring to get the clamshell(idk if that is the part im having a problem with) off. I got all the screws I thik. But I cant figure out to get it off
Giant biSSEll purple vacuum
Does the Roller have a number on it?. I can't find the number to replace mine
Last time I looked, it was around $200 USD.
do you ever take apart the cyclone? it's fairly simple to do and wif you're going to the trouble of disassembling everything I don't know why you would skip unscrewing 6 screws to take apart the cyclone itself. There are nooks and crannies in there that you can't see if you don't take the whole thing apart
I'm going to put it in the airflow box, then probably dispose of it.
@@VacLabI mean specifically for any of the hoover that have the "cyclonic assembly" that you refer to @5:00 . Have you ever taken the inner plastic cyclone/tornado apart? I haven't seen you do it in any of your hoover teardowns or cleanings
@@cakecakecake1 yes I have, there's not much to them. Fairly easy overall.
Hello! I just found my Hoover Elite Rewind Plus with the cord all the way out and it won't rewind!! Ugh! Is that fixable?
Yes, but can be complicated.
@@VacLab Thank you for the reply! I guess I can start taking it apart. Will it be self explanatory once I do? No one has a video up showing how to...... :( Is it worth it. It was a roommate I think who did it.
If you are very mechanically inclined, you'll figure it out. Watch out for the spring tension though.
I tried to fix mine with the same problem but gave up when I could t figure out how to get into the thing. Now I just wind the cord around the vacuum cleaner.
Where is part 2
I haven't recorded it yet.
I need help
Never mind i got it lol😅
Fabulous!