Awesome stuff - thanks so much 1 - Can you share your amp settings? 2 - Can you have the boost pedal available on the amp while doing channel changing on the HX? Thanks!
@@DoctorMcFarlandStudios how can i assign pc commands To snapshots? I tried the same Workflow as for presets, but it didn‘t work. Could give me a hint how To send pc commands via snapshots?
@@ichbins1073 Same process except you choose The Snapshot first, assign the PC and CC messages, to go a different snapshot then back to the one you want. Then hit save. That should work. Haven't done it in a few years.
Hi! Could you help me with a question about Midi? I own both a HX Stomp and a HX Effects. I connected the MIDI OUT from the Effects into the MIDI IN in the Stomp. Connected like this, every time I change a preset in the Effects (from 1A to 1B, for example), a similar change occurs immediately in the Stomp (from 1A to 1B). In short, presets are chaging together, and that is exactly what I want. However, what I want to do and couldn't is the following: when I activate Snapshot 2 in the Effects, it also activates immediately Snapshot 2 in the Stomp. Does anyone know how to set this on the Midi settings? I've already read both manuals and have no idea how to make this happen. Thanks a lot! Best.
great video!!!!!!!!! so when IN A PRESET. How would you just change amp channels when you are already inside a preset because you want to keep the same effects ?????
@@DoctorMcFarlandStudios thank you for that. but to be honest I've tried that already It did not work. and that's why I looked you up to ask cause your one of the few who gets the shit right. thank you
@@DoctorMcFarlandStudios Thanks, I have the Amp1 Iridium on its way (ordered yesterday) and already have the HXFX. I noticed in your other vid that if you put the Amp1 in some mode (reverb switch and power on) you were able to change channels with the three switches on the Amp1, are you able to get to all 4 channels this way since there are only 4 switches? I'm thinking this is all I would need as I just use the HXFX in 4CM with one preset of effects and turn them on and off as needed. Make sense?
@@DoctorMcFarlandStudios Thanks! Do these presets actually save the dialed in Treb/Mid/and Bass for each channel or they will always go by what is dialed in on the unit?
Thank you so much for explaining the magic of MIDI on AMP1 in combination with the HX-FX. Great Video!!!!
Thanks!!! There is a lot more where that came from.
Dude I really appreciate what you do for us.
Thank you for that 🤘
Your always welcome. More videos coming soon.
Awesome stuff - thanks so much
1 - Can you share your amp settings?
2 - Can you have the boost pedal available on the amp while doing channel changing on the HX?
Thanks!
Thanks for the video!
Changing channels while playing do you feel any sort of delay or latency???
Only between presets. Snapshots are seemless
I’d love to use this rig. I’m a line 6 fan, and I want to try the bluguitar amp 1.
These two units are a match made in heaven. I think you will like it.
Great info. But can PC commands be sent on individual snapshots within a preset, or is it only part of a preset instruction. ?
Both PC and CC Commands can be sent :)
@@DoctorMcFarlandStudios how can i assign pc commands To snapshots? I tried the same Workflow as for presets, but it didn‘t work. Could give me a hint how To send pc commands via snapshots?
@@ichbins1073 Same process except you choose The Snapshot first, assign the PC and CC messages, to go a different snapshot then back to the one you want. Then hit save. That should work. Haven't done it in a few years.
Hi! Could you help me with a question about Midi? I own both a HX Stomp and a HX Effects. I connected the MIDI OUT from the Effects into the MIDI IN in the Stomp. Connected like this, every time I change a preset in the Effects (from 1A to 1B, for example), a similar change occurs immediately in the Stomp (from 1A to 1B). In short, presets are chaging together, and that is exactly what I want. However, what I want to do and couldn't is the following: when I activate Snapshot 2 in the Effects, it also activates immediately Snapshot 2 in the Stomp. Does anyone know how to set this on the Midi settings? I've already read both manuals and have no idea how to make this happen. Thanks a lot! Best.
Great video! What if for instance I wanna change with MIDI the amount of gain on a channel, what do I do?
That is demonstrated in another video. I have all my Bluguitar videos in a playlist so I suggest checking it out.
great video!!!!!!!!! so when IN A PRESET. How would you just change amp channels when you are already inside a preset because you want to keep the same effects ?????
I would use snapshots for that
@@DoctorMcFarlandStudios ok. so how would you do it NOT USING SNAPSHOTS ?????
You go into stomp mode and use one of the switches to send a cc message to change the amp channel.
@@DoctorMcFarlandStudios thank you for that. but to be honest I've tried that already It did not work. and that's why I looked you up to ask cause your one of the few who gets the shit right. thank you
@@theRodofwar I will try it myself.
So you do need to do this in MIDI correct? It can not be done without?
You can toggle between clean and a another selected channel with a footswtich but you can't access all 4 channels without MIDI.
@@DoctorMcFarlandStudios Thanks, I have the Amp1 Iridium on its way (ordered yesterday) and already have the HXFX. I noticed in your other vid that if you put the Amp1 in some mode (reverb switch and power on) you were able to change channels with the three switches on the Amp1, are you able to get to all 4 channels this way since there are only 4 switches? I'm thinking this is all I would need as I just use the HXFX in 4CM with one preset of effects and turn them on and off as needed. Make sense?
@@danc3746 that is preset mode. You can choose any combination up to 3 presets.
@@DoctorMcFarlandStudios Thanks! Do these presets actually save the dialed in Treb/Mid/and Bass for each channel or they will always go by what is dialed in on the unit?
@@danc3746 the knob settings are not stored in the presets.