2013-2016 Ford Escape 1.6L/2.0L Ecoboost P1450 P144C: Canister Purge Valve Diagnosis and Replacement
Vložit
- čas přidán 7. 08. 2024
- In this video we show you how to diagnose a faulty canister purge that may cause a hard start concern after fueling. Common codes are P1450 P144A P114C P2195 P2196 P0456 P0457 evap codes.
Latest Ford Canister Purge Valve Assembly-
1.6L Ecoboost-
CV6Z-9D289-T
2.0 Ecoboost-
CV6Z-9D289-S
Forscan is free Ford Specific Diagnostic Software:
Download Here-
forscan.org/home.html
ELM 327 Adapter I Recommend-
amzn.to/2GC6dBj
As an Amazon Associate I earn from qualifying purchases.
My Automotive Repair Shop BSG Automotive-
www.bsgautomotive.com
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law. - Auta a dopravní prostředky
I believe this is the best CZcams tutorial video that I’ve ever seen. Incredible skills and great camera work! My son and I will be doing this on whichever Escape he ends upon buying, I’m sure of it. And we are confident we will do it successfully thanks to you!
You do work on other's vehicles? And are you in WA?
This video rocked! Repair only took a couple of hours and saved us $450. Our escape had those awful two-way green clips on all connections so it took longer than it would have if we had the snap-on connections. I was intimidated at first (my 2006 equinox didn't have so much tubing and electrical connections! Just a lot of rust...) but this guy is a life saver. Subscribed.
This is the best car repair video I have ever seen. Part is in the mail, going to tackle this next week, know exactly what I'm getting into. Appreciating the effort that went into this very much!
The best, most clear and complete auto repair video I have ever seen. Great job.
Thank you for the professional video, the way they should be made! Clear, articulate, thorough and a well positioned camera that captures all of the essentials. I am a backyard mechanic of 40+ years and meticulous by nature, so I can truly appreciate the work you have put into the making of this presentation. You have gained a new subscriber and it's my pleasure. Keep making these appreciable vids good sir. Thanks again.
This is easily the best most laid out video I’ve ever watched. Thank you
You def deserve a lot more views on this video.its the only detailed video out there and actually shows you the part you need for the ecoboost cars auto zone dont even have it .
Thank you so much for the tutorial. I've successfully replaced the purge valve of my 2016 Ford Escape. It took me a long time to replace it, but I got the job done.
I'm doing one of these tomorrow, I really appreciate your channel, as a new tech this is literally gold.
What a comprehensive video. Well done. Loved the tests and all the "watch out for" comments during disassembly. Thank you.
Can not find anything for this motor type and boom!! This channel perfectly shows up and saves the day. Thank you sir!
I bought a replacement purge valve a couple of years ago because my car wouldn't start after filling it up with gas, but I'm a novice so I was too nervous to actually attempt the repair myself until I saw your video. Thank you for guiding us through each step. The close-ups of the connections and how to release them were especially helpful. I was able to do the majority of it myself, but I did need help getting the lock off of the connector off the back of the purge valve line.
This is the best video I have watched for this change out. I'm gearing up to replace this piece over the weekend and this helped with my confidence.
Great video, saved lots of time! Escape was taking 3x to start after getting gas and would get code P1450 sometimes. Replaced the purge valve assembly and fixed! What a pain to do, but the video was helpful. Would be careful with the Green Locking Clips, broke both sides on the lower one and it left the center which still locks it. Had to remove with fingernail to raise it and a long hemostat to grab and pull out.
I have a 15 1.6
It was actually easier than I thought it would be. Feeding the new one back through the way it's supposed to be on the engine did take a couple tried. I will say that mine came in a long box. It actually looked like the wrong part at first...takes some gentle bending to get it to fit right. Took me around an hour but I'm one of those people that obsess over every single bolt and screw. Check engine light went out in two days. Filling up the car at gas station for the first time, the engine didn't stall and the light went out 👍
Excellent video, thanks for take the time to made this kind of videos, I had before a 2014 Ford Escape, now have a 2018 Escape, hopefully 🙏 no issues happen. Nice work, keep up 👍🏻
Thankyou soo much!!! This is literally the only video on CZcams that helped me with this problem!! Please make more valuable videos like this!!
This is EXACTLY what’s going on with mine! All the way down to the sound. I usually have to literally get out of my car and open my gas tank door and push the little thing open so the air comes out! I replaced the small fuel canister underneath of the car thought that would solve it. Come to find out it was actually this part I need! Autozone gave me the wrong part for the problem apparently! Now my oil smells like straight gasoline now too. Thank you so much for this video. I’ve been trying to figure this out for 2 years now. Smh.
"This valve"..........proceeds to hold up a handful of spaghetti and meatballs.
Close and open constantly... but that valve just lasts like 1.5 year
The part difference is huge between the N/A engine models, just a couple bolts and no spaghetti, normal looking part. I was at the part store cursing my luck. Lol
I echo everyone's comments. This video was Very well done. Saved me a lot of money. I had the 2.0 and you are right it was easier. I didn't have to get under the car at all. Much appreciated!!
Your videos are invaluable! Keep up the great work!
Chris Johnson
Certified Master
Auto Technician
Brian,
Thanks so much for this video. I have owned 2 Ford Expeditions in the past and your knowledge helped me through many repairs.
After a 4 year break I'm back in the Ford world and now own a 2015 Escape. I replaced the purge valve in the engine bay using the Dorman kit that splices just the valve into the assembly.
I possibly also have an issue with the vapor canister purge valve located near the tank. I say this because I can hear an off and on humming sound that repeats every 2 seconds or so coming from the area where the valve is mounted. I bought the part, a plastic box about 3"x4", that houses the vent solenoid and mounts to the charcoal cannister assembly. However, I'm not sure if the sound indicates a problem with the valve or 8f it is a normal part of it's function. I'd rather not replace it if it's not a problem.
Before I address that possible issue I need to remove the brake rotor shield on the right rear wheel as it's broken loose and is rattling like crazy.
I'd appreciate any advice you have on the canister situation.
Thanks again
Thank you so much man. God bless you. I've been trying to open this and didn't know where to find the info. U help me so much. Thank you again.
Don't even own a Ford but love watching all your vids.
Thank you so much for covering this issue. Thankfully, my fiesta was under warranty when mine was serviced for this exact problem. It’ll probably happen again and I’ll be able to do my own labor😁
Very interesting video,and keep up the very knowledgeable content of the issues you have the other side of the pond on the Ford product 👏👍
Thank you for making an awesome video. I wish more mechanics were like you!
Dude I effing love this CZcams channel. This should be on cable. I am convinced!
Great video and I don't even own anything with a 1.6L ecoboost but it does really make me edge closer to Toyota every day no matter how blah they are. Love your videos, Brian. Thank you for sharing.
GR corolla... definitely fiesta/focus st replacement.
Quality of your content is superb, Most of these in Europe are Diesel Variants the 'Quality' is just the same as the US market vehicles 🤷.
Thanks a lot for this. I am lucky enough to be able to pay a shop. More work than I want to get in to.
My 2014 fusion with the 2.0L Eco started doing this. Wouldn't start after refueling, and a few times, made that horrible sucking sound and stalled. I've also got the 1450 and 0456 codes. Replacing it looks daunting, but at least I know exactly what's causing it. Awesome video.
I also have a 14 Fusion with the 2.0 Ecoboost. At 45k miles the vehicle began to stall regularly. The dealer replaced this part and I’ve never had the issue since. I am at 138k miles now.
Yess, I'm editing the 1450 and the 0456 codes. Ford Focus. So ridiculous. Great informative vid. Thank you so.
You have excellent skill with the camera too.
I like the test after repair. The replacement looks like a problem, but if you take your time, it should go well.
Thank you so much, your video is so in depth and so very helpful, full of good tips....so appreciate it!
This video helped me to find the evap canister. And save me a lot of money.
Thank You. My wife's 2014 Escape just rolled 100000 miles. The engine light came on at 1/4 tank, When the wife filled it up. The engine started and died several times before I could get it to run. Now I know what to expect if I choose to change it.
I missed the part about removing the undercarriage cover for the lower one lol. I made due by reaching down from above, worked fine. Got to the green clip with the needle nose pliers and then used my fingers to push the built-in clip in and got it off pretty easily. Thanks for the video!
This is good to know! I was hoping I would be able to remove this from the top as I do not have anyway to jack up the vehicle. I also have skinny arms and hands. Were you able to put the new hose on from the top side?
@@kimberlysaviano3918 Yes I did everything from the top side and if I remember correctly it was easier installing the new part than taking the old off.
Thanks for this video!! The new "replacements" actually come where you can potentially just swap out the canister without having to change out the rest of the lines. I'm going to give that a shot as the bottom line (cooler line) is a PITA for me to get to. :)
Did that work for you?
Awesome video as always Brian!! 👍👍
I have been going crazy with this issue. Thank U thank you so much.
Did you get a wierd noise from it? Mines broke off and a wierd noise is coming from it
Did my 2013 a few years ago in my 2.0. I removed the wipers and upper cowl panels. Made getting behind the engine a lot easier for that one connector. Did I mention those connectors are worse than water torture.
I dreaded trying to get it out too, once I was at that point, no room for any common tool. Luckily I tried it with bare hands, no tool, and it was surprisingly easy. Almost break the green clip off and the press in the built-in clip and boom, it was off. Saved a bunch of time.
Yup I've had my share of changing these🙄great video👍
1.6 Ecoboost. What a nightmare engine and set up.. Luckily I have a really good local Ford dealer parts counter guy that keeps me informed about all the parts updates since I don't always have access to the TSBs. BTW, they keep the long blocks in stock.. Thx for the tutorial!
As always, another excellent video! Thank you sir.
We had this issue on our 2015! Replacement it on our 2.0 about 6 months ago at dealer for about $350 no issues since very happy
What mileage did it have on it? Mine is pulling a P1450 code at just 55,000mls and been garaged all its life. I cleaned up the capless tank but the code still comes on so think this is my next avenue.
@@cardiffgiant9406 2014 Escape Platinum Turbo Turned 55,000 not too long ago. I was really low on gas one day filled up car wouldn't start. Finally after lots of taps and holding down gas pedal. It started loudly.
A couple weeks later pull of the freeway stopped at bottom of ramp and the engine starts racing and wanting to surge forward.. Took to dealer first they start telling me no codes may not figure out. Told them you want met to take this car out of here and end up dead? $1000 grand replacing 2 parts. My husband had taken a warranty out when he bought the car so its only $100. Think they have a problem with the part.
@@debfredrickson85 thankfully mine isn't that bad but after my first message we experienced the hard starting after refueling so I'm changing this valve
Dude - you're information is AMAZING! Thank you!
i was a USAF AGE mechanic , i saw u were a marine, ooohraaa , very cool !
Man I appreciate this!!! 2.0 gas tank has been "farting on me" as I call it. Cars been a big headache for 2 years now. 🤦
great vidéo I got the 2.0 l and i had to unscrew the oil brake réservoir to have à better acces ....did it all in an hour
Great video. Really helpful in determining what would be involved.
thanks for sharing. you look like a cool dude. that weird pipe looks like The Thing.
Thanks, my ‘19 Fiesta ST stumbles off idle sometimes after fueling up. If a code pops up, I know what to do.
Now if they could come up with a better solution!
I’ve changed way too many of these! Great explanation though. 👍🏼 like I said on Facebook, you’ll always do well.
This is a awesome video. You are the man!
excellent description. of the 1.6 evap system.
Great video and thanks for teaching👍👍👍👍👍👍👍👍👍
I believe I've read in FB Mustang groups that some individuals have had this same issue after filling up. And I know our Mustangs have the same purge valves, in fact I've changed mine and I don't think I even have 20K miles on my 2017 lol.
I think back to the good old days, when working on my grandpa's '54 Chrysler I could sit on the front fender, place my feet down between the engine & body, and work on the carburetor.
That's rad
Very informative and complete video. Perfect
just did it 40 min 2.0 thanks brother!!!
Great an very complete analysis, thank you my friend
Hi Brian,
I'm a big fan of your work since you shot videos at the dealership.
Lately I've been watching Prof J. Kelly at Weber University videos on EV technology deep dives and complete teardowns (batteries and drivetrain).
I've been wondering about your thoughts on EV technology vs ICE, especially after seeing a review of the new Ford Mustang Mach-E EV.
Is this something you'll be working on in the near future? Your son???
Thanks! Love your work, keep it up man.
Got my 14 Escape two years ago at 34k miles… it’s only at 57k miles now and had the P1450 code pop up! Mechanics said they fixed It BUT my engine light popped back up and when I filled up my tank with gas It was taking forever for the engine to start AGAIN. I better get my $$ back!!
Great video Brian like always BTW what kind of ligth are those if u have a part number they look pretty convenient
Amazing job explaining how to get it out.... but as someone who has the mechanical competence of a 3rd grader... it would have been nice to see you put the new one in
Awesome video, thanks for sharing..... mine is starting to do this however there is no check engine light or any codes...... I'm wondering if I should just change it...... it's doing this exact same thing..... thank you
I thought those lines looked familiar. They are the lines that you put catch cans on. I wonder if adding one helps prolong the valves
BTW excellent video, it helped tremendously!!!
great video what software did you use for the diagram I could use something like that
Im not sure my husband will try to fix this himself. This is a great video. What should we expect to pay to get it fixed?
Awesome video thank you for this. I need to replace my wife's but won't have time for a couple weeks. This might be a dumb question but is it ok to drive normally until it gets changed? Thank you.
How do I do this on a 2017 ford fusion 1.5l
Excellent detail! Thanks so much
My 2017 Escape 2.0 EB with 45,000 miles on the clock was not displaying any codes nor was it hard to start after fuelling up. The unidentified round part by the orifice at the T connection (not the purge valve) in this video was just making a constant loud and irritating ticking noise while the engine was running. I identified it was this part because putting my hand around it muffled the noise and I could keel it tapping. I finally got around to changing the entire ejector assembly out today and the engine runs quietly again. My laymans approach to this was identifying the noise, watching a video to even find out what the noisy part was called, then ordering and changing that part out fingers crossed. I did however remove the windshield wiper cowling to give myself more room on the 2.0 while doing the job. Don’t laugh but I also cut some of the old assembly lines off first about 1 inch from their fittings, I found the old fittings were much easier to manoeuvre, wiggle off and remove that way. Not a professional method to do a repair by any means but it apparently solved the problem.
Thanks for the video. My same vehicle drops idle a little after gasing, but dosent die and runs normal (seemingly) but no check engine light. Should the check engine light come on with this evap code ?
Hi Brian, I have a 13 1.6L. I was wondering if you have any ideas for me to solve a strong gas smell inside the cabin whenever I have the blower motor on. Yes it's pretty bad, no codes . I changed the pcv hose but that didn't help. Any ideas what you would try
Hello, great videos. Non related question. I have a 2014 Ford Escape 1.6L Ecoboost. The A/C has a really slow leak and freezes up on occasion and needs refrigerant added. A local shop tells me they can't just "top it off", they need to drain the system completely and refill it. Is this so?
perfect explanation.
Thank you.
My 2016 FiST starts funny when I fill up I'm gonna look into this next time I'm doing maintenance
Awesome Presentation !
My wifes 2016 2.0 ecoboost is doing this. So replace the purge valve assembly. Also do you change the vapor cannister as well ?
Thank you for descriptive video
My broke on 4 hour round trip! Luckily it was under warranty
very thorough! wow +1 subscriber
Great video. Question... How do we know if just the solenoid is bad? Perhaps the valve is stuck open (or stuck closed) because of a bad solenoid? Or, does replacing the monstrosity actually also replace the solenoid as well?
I reallly like this chanel
Can the canister vent valve, located near the fuel tank on a '15 edge 2.0, cause these same symptoms? I'm having this issue but unsure if i should just replace both parts.
do you have a video on removing and ibnstalling new water pump and timing belt, therir are two sensors down there too i would probobly replace them too while im down there.
I had this replaced last October and now I'm getting the same code again. So 8 months later we are again getting the P144C code
What are common issues with the escape 2017-2019?
Mr Ford Tech please reply, I have a 04 lariat 5.4 3v, What are some things that I could purchase and put on the truck that will basically “bulletproof” the 3 valve. I don’t have a grand for lockout kits, but please recommend me a few things and explain how they would help. God bless you!
What is the FTP supposed to be at when driving? I did the test you performed except I did it manually as I do not have the Ford software you have but ultimately I got the same results. I can view the ftp voltage and pressure readings along with the evap purge valve duty cycle and vent enabling. However I am still getting 144c code. I pretty much manually energized the vent valve thereby closing it then I momentarily opened the purge valve manually and my readings went down all the way to .32V and then gradually started to increase at the same rate yours did. The evap components are working correctly. Only thing left is whether the car itself is commanding the components correctly
Hi I have a question do you have a video changing the throttle body
The worst job that I have done on my 2016 Escape, was when I replaced the front parking lamp on the drivers side. I removed the wheel, inner fender liner, air cleaner box. After 1 1/2 hours I finally got the bulb changed. That is a lifetime bulb, because I'll never do that again. Is there an easier way to do that?
Have this issue in the 2014 2.0L. When I started disassembly (also doing an intake valve cleaning), there is an abnormal amount of oil in the evap and intake system. Assuming the oil caused the failure. Thoughts??
Would this be the same for 2015 Edge 2L I4? Your videos are so helpful??
Hey silly question but will a purge valve from a 2.0 fit on a 1.6? They look completely identical.. and I don’t see why it would make a difference. Thought I’d ask. Thanks! Besides I can only find a few for 1.6 and are more expensive lol
Do you know what additional issues might cause this to continue to come back on. I have replaced these parts now 3 times.