How to take apart the motor on a Singer Featherweight: Singer Featherweight Tutorial - Part 7
Vložit
- čas přidán 21. 12. 2022
- Learn how to remove and disassemble the motor on your Singer Featherweight 221. I will also show you how to inspect your brushes and clean off the commutator without removing or disassembling the motor. This is part 7 of the restoration video series, if you missed the beginning of this series, check it out here: • Singer Featherweight T...
Here is the video that will show you how to put the motor back together: • How to put a Featherwe...
Here is the video that will show you how to reinstall the motor:
• How to install the lig...
Need new grease wicks? I sell them on my website here:
sewingmachinerehab.com/shop/o...
Learn more about Sewing Machine Rehab at: www.sewingmachinerehab.com
Look below for links to most of the products you will need:
Shop the Singer Featherweight Shop for some supplies you need: singer-featherweight.com/?aff=57
List of supplies and links:
Various sized flat head screw drivers such as...
Chapman screwdrivers Kit No. 9600: amzn.to/47R4n7N
Craftsman Ratcheting Offset Screwdriver: amzn.to/3Ehii9o
Penetrating oil, I love Aerokroil by Kano: amzn.to/3R1a25h
Lily White Sewing Machine Oil: amzn.to/3Ej1O0F
Sew-Retro Sewing Machine Grease: singer-featherweight.com/prod...
91% Isopropyl Alcohol: amzn.to/45tO7rv
Zymol Cleaner Wax: amzn.to/3P05c5o
Krud Kutter: amzn.to/3Ek2inh
Krud Kutter - The Must for Rust: amzn.to/3R2lKfR
Regular Cotton Swabs: amzn.to/3YW22nS
Pointy Cotton Swabs: amzn.to/3ECINXn
Old cotton t-shirts cut into pieces or other rags
Blue shop towels: amzn.to/45yO2D6
Sandwich bags (to keep parts together)
New Bed cushions for your Featherweight:singer-featherweight.com/prod...
New Featherweight Drip Pad: singer-featherweight.com/prod...
New LED lightbulb for your Featherweight: singer-featherweight.com/prod...
New belt for your Featherweight: singer-featherweight.com/prod...
New electronic style foot control: amzn.to/45tsNCH Feeler gauge: amzn.to/3YZJbbq
Thread tension meter: singer-featherweight.com/prod...
Tweezers: amzn.to/45Os7r7
Several small artist paint brushes and a 1" chip brush (you can buy on Amazon but they are cheaper at stores like Walmart and Harbor Freight)
*As an Amazon Associate I earn from qualifying purchases
**As an Featherweight Shop Associate I earn from qualifying purchases
Much respect for a woman who is not afraid to get her hands dirty!
An excellent demo series! You did a fantastic job of explaining the mechanics of disassembly and reassembly. How fortunate we are to have this. Many thanks!!!
Note to viewers:
7:40 Pull out carbon brush SLOWLY, and stop before brush comes fully out. Check direction of curve on end of carbon tip. Is it horizontal or vertical? Make a diagram on paper showing curve of carbon tip so that you have a visual when putting the used one back in after maintenance. It makes no difference on a new brush, but the old one has a curve matched to the commutator curve inside due to wearing down from contact. This is particularly important in this particular model, as the brush seems square not rectangular. In my vintage Viking machine, the brush is rectangular and only fits one way inside, so it is foolproof.
Thank you so much! I was sad when this one was completed, it was so much fun and I have immensely enjoyed the interaction with all who have followed along!
Your explanations are really good and you are very well spoken. Thank you for the information.
You are welcome! Also, I took a peek at your channel and I love your Featherweight watercolor!
I am so grateful for your instruction. Thank you for sharing!
You are so welcome!
Thank you so much for another wonderful teaching video Jen. I am very grateful for these. My machine helper son has moved away. He was my eyes for closeup work on motors etc. Your videos are always filmed so good that I am confident that I can do it without him. I am wishing now that I hadn't let them sit here a year after watching this. I am going to love doing this far more than the 15-91 and 201s. Wishing you and your family the most wonderful holiday season. Blessings
Deborah, you are always so kind and encouraging. Confession, when I work on my machines I use my cheater glasses from the drugstore. I don't need them for anything really but it really helps with the eye strain from looking at all the little parts up close. I also use an Ottlite with a magnifying light. Don't know where I would be without them! A very Merry and blessed Christmas to you as well!
Jen, this is fantastic! Merry Christmas to you and yours!
Thank you Bob! Merry Christmas to you and Liz, blessing in the New Year as well!
Thank you very much for the detailed video! I happened to stumble across a featherweight in decent shape from 1964 at the thrift shop for $12. I definitely didn't pass that up haha and I've been enjoying the process of resurrecting it and this video is super helpful!
I am so glad you are enjoying the videos! A $12 221, that is quite a find!
You could call the little washers shims. They are different, as the shims are used to adjust end play. How far the shaft moves in and out.
Good point! Thanks!
Hi. Newly subscribed. sent by Bob Fowler. You video was very helpful today as I was servicing my Featherweight. I am looking forward to watching more videos. Thanks.
Welcome! Thanks for saying hello and Bob is one great guy!
Wow. Thank-you for your videos. I've wanted to take mine apart but was afraid to and there are no courses near us. You're videos are inspiring and confidence building. Excellent training. 😊
Thanks for watching and saying hello!
Great video! I didn't know there were springs where the wicks are. I have flushed the wicks in place but have never removed them. I'm anxious to see how it all goes back together. When I take the motors apart it always makes me a bit nervous but it so needed on some of my machines. Looking forward to the cleaning process. Thank you! 🦋
Thanks! Not sure if the cleaning process will be one or two videos long, but I will cover all the info that I think is important to know. Hopefully after watching someone else do it you will feel less nervous. :)
Watching your video series, the content is top notch, and production quality is also. You are a rare breed, as a rehabber selling these machines yet still sharing in detail how it is done. Not keeping any secrets, you are sharing for free more than other rehabbers are sharing in paid classes. Keep it up.
Thank you! I enjoy the process so much!
Armature shim washers,is the proper nomenclature(discription)
Thank you!
While cleaning out my attic this week, I found a Featherweight 221 in it's case that has been sitting there for almost 30 years! It is a 1952 and looks like it was rarely used. I have been following along with your videos up until taking apart the motor. If I tackle taking the motor apart, where can I buy new wicks for the grease? I am assuming they are hard as rocks by now. Thanks!
Wow! That is wonderful! I think I will go look in my attic for a Featherweight haha! I actually sell the grease wicks on my site now: sewingmachinerehab.com/shop/ols/products/grease-wicks-for-singer-featherweight-221-motor ….and good luck with your restoration!
would i be able to just use electrical tape instead of heat shrink tubing? btw thank you for this series, it is amazing... i have 2 featherweights all taken apart ready to be cleaned now, thanks to your helpful detailed, descriptive videos! ur an angel
Hi! Thank you for your kind words, I am glad you like the videos. I would stay away from electrical tape in place of the heat shrink tubing. I am not an electrician but from everything I have researched the heat shrink tubing is safer. I hope that helps!
thanks! one more question, can i just skip the heat shrink tubing altogether??@@SewingMachineRehab
Harbor freight has heat shrink tubing, you don't have to shrink it, if you don't have a heat gun !
Good Evening. I am so happy that I found your CZcams Channel. I was gifted a 1952 Featherweight. It is in need of some TLC. I have removed parts following your instructions. I even have the cap off the motor and have the other side to loosen to get to the wick. I noticed that the armature is black and not the copper color yours is. I am assuming that I can wipe it off, not sure if I can get back to the copper color. Is it normal that it should be black and not copper? If you have any suggestions on how to handle this, I would be greatly appreciative. Thank you and Cheers.
Hi! You can wipe off some of the carbon you see with a cotton swab dipped in alcohol. Then I polish it using very fine sand paper, around 3000 grit and wipe it again with alcohol. You should see copper under that black when you are finished. The featherweight shop makes a rubber honing stick which also works well. I hope that helps!
Thank you for your reply. Another question: The coils on the armature that look like a flower are also black, not copper that I have seen on your videos. I have tried to wipe it off and nothing comes off. So, can an armature have dark wire opposed to the copper wire? I was wondering if there was a time that Singer made their motors that way . FYI: The machine did run before I took it apart. I look forward to your thoughts. Thank you in advance. Cheers.😀@@SewingMachineRehab
Thanks so much for documenting this! Do you have a source for the motor grease wicks? Thanks!
Are you looking for just two?
@@SewingMachineRehab Well if all goes well, I will need 6.
So sorry, I meant to get back to you on this. There are a couple sellers on Etsy that sell them. The wicks are a little thinner than the original wicks in a 221 but they work. If you are looking for a direct source you can look at McMaster Carr, it would be under “Firm felt cord” and you would need to identify the diameter you need. Hope that helps!
Thank You for the video Jen. I am not able to get the set screw off the shaft. Is it the end of the world if I can't get to that wick to change IT? I used Kroil for several days and used the hair dryer without success. I was able to get the other wick and wick spring out
Hi! You are welcome! Do you mean the set screw to get the pulley end off?
@@SewingMachineRehab yes
@@KarenC-rv2zp I just saw you replied to this. If you can’t get it off then you can just clean in place. I would add grease to the port and then when you are able to run the motor and it can heat the grease up check to see if you need to add more. I think it would be ok to add a drop of oil in the port before you add grease just to soften the wick up if it is hard. Then add the grease. Sorry I didn’t get a reply back right away!
@@SewingMachineRehab thank you for the information. I just received your wicks and got the spring and the wick back in the other port!!! HAAA. Also The wicks are they wool or cotton?
@@KarenC-rv2zp Just realized I didn't answer this, they are wool. Sorry for the delay!
Could you point us to the McMaster-Carr item number for the grommets? I know they are sold in packs of 100..thank you for sharing you knowledge. Thanks!
did you find the grommets? i am looking for them too- I am using my bf's youtube tv account - my name is lana
No, i used shrink tubing around the wires.
Hi, a little late on this, sorry. The one I use is B811. It is the closest fit I have found that still has a larger inner diameter so that you can fit the original thicker wires through if you want to. They are a little fiddly to get in but they do fit well. I think you have to purchase 100 at a time but they are not too expensive. I hope that helps if you still needed to know!
Thank you, I know you must be very busy. I can’t imagine how much time and effort it takes to do these videos and answer everyone’s questions. 🥰
As you were removing the brush covers, you mentioned a link to get new ones. However, there is no link for the covers. Mine on my white featherweight are broken or sheared off. Can you please tell me where to find new ones? Is there someone who can make new ones using a CAD program and a 3D plotter? Any information will be greatly appreciated! Thank you.
Hi! Here is the link: singer-featherweight.com/products/motor-cap-screw-small/?aff=57 I will try to add it to the video description as well. I don’t know if anyone who can make them with a 3D plotter, that would be great if there were someone who did though!
Thank you! Do you have a code to get credit for my purchase?@@SewingMachineRehab
Hi again :) That link will do the trick! Thank you for asking!@@jenc7086
If necessary, let’s say a wire is frayed or corroded from water exposure (!), can replacement wires be purchased, or do you know if the correct wire ratings can be found on the repair schematics? I am not quite there yet, and I need to have my husband look at the motor for his professional opinion. While not a small motor guy specifically, his career involved fixing anything on a seagoing vessel that needed repaired, . I did get brave and take the motor off and open it. I am now taking a break.😸 in a weird turn of fate, one of the brush screws was obviously broken and repaired with some type of hardened goo, maybe an epoxy. Like the one you are working on, mine has been cleaned or “repaired “ by someone before me. Someone with gorilla strength where screws were concerned.
Hi! Yes, you can replace any of the wiring with 18 gauge copper stranded wire. I usually replace the wiring for the light and switch and the two wires that come out of the motor. If your husband can solder (sounds like he can!) then you should be fine. Good luck with the brush cap screw, that’s frustrating but at least you can buy new ones. Let me know if you have other questions, I haven’t made a rewire video yet.
@@SewingMachineRehab thank you very much for the reply!!
Curious..what is your education background?
Hi, beyond high school, I have a little college and no degree. I’m self taught. My husband says I consume everything and I have my dad to thank for my mechanical abilities. That’s pretty much it!
Adjusting the motor drive belt too tight ,only slows down the speed of the machine.
Agreed!