Da! Lol, no i speak croatian. I've replaced the pickups with some no name cheap alnico pickups from aliexpress. Installed the vvt passive controls, and on MM pickup i just wired the coil thats closer to the p pickup, so, now MM (bridge) pickup is working as single coil pickup 😁
@@parazitoffn9256 you shoud have 2-3 wires that are "ground" and 2 that are "signal", one for each coil. wire the one closer to the bridge to volume pot and wire ground also to the volume pot. rest is wired like standard JJ or PJ; VVT
@@parazitoffn9256 www.talkbass.com/attachments/ruoa6r-jpg.805165 this should be your starting point. i've wired bare, white and green to the ground and black to volume pot. i've left red wire unsoldered.
Да, ZERO FRET и tusq NUT, а также многие другие вещи, не входящие в этот ценовой диапазон. Он был сделан в Индонезии, я полагаю, на той же фабрике, которая производит гитары Cort, Ibanez и Squire. хорошего дня, Володя :)
It sounds great, but I'm worried about the fire in your kitchen 😉
That's humidifier 😅
Great sounds, compressed enough for great recordings, thanks for sharing!
Sounds awesome... The humidifier also features strongly in this video 😁
lol! thnx!
Beautiful bass sounds awesome
That bass sounds great !!!
Beautiful looking bass, don't know why they discontinued this color :( What are the mods?
It really does sound good. All the different settings sound good. Can you tell us about how you recorded this?
Thnx. Straight into behringer umc404hd. Only thing i used in daw was compressor and eq (40hz lowcut)
What did you do to get equal volume of both PU's? I have the same bass, and the bridge PU is quieter that neck.
P.S. Do you speak Russian?
Da! Lol, no i speak croatian. I've replaced the pickups with some no name cheap alnico pickups from aliexpress. Installed the vvt passive controls, and on MM pickup i just wired the coil thats closer to the p pickup, so, now MM (bridge) pickup is working as single coil pickup 😁
@@igorvuk4454 ,thank you! I'll try to rewire my bass too.
@@parazitoffn9256 you shoud have 2-3 wires that are "ground" and 2 that are "signal", one for each coil. wire the one closer to the bridge to volume pot and wire ground also to the volume pot. rest is wired like standard JJ or PJ; VVT
@@igorvuk4454 thank you, but maybe you have a diagram?
@@parazitoffn9256 www.talkbass.com/attachments/ruoa6r-jpg.805165
this should be your starting point. i've wired bare, white and green to the ground and black to volume pot. i've left red wire unsoldered.
Обратил внимание, что у этого баса есть нулевой лад. Интересно)
Да, ZERO FRET и tusq NUT, а также многие другие вещи, не входящие в этот ценовой диапазон. Он был сделан в Индонезии, я полагаю, на той же фабрике, которая производит гитары Cort, Ibanez и Squire.
хорошего дня, Володя :)
kaj nije bio dobar sound pa si kupio pickup-ove? Humbucker si prepolovio na dva single coila. Čitam komentare pa ne kužim skroz :)
izvadio sam pickupove i preamp. stavio obični alnico V P i MM pickup. na MM pickup sam spojio samo jedan coil, tako da radi ko single coil.
weird video ...... i can hear the bass but there is an empty output jack clearly visible........
Thats the switch for bridge pickup, not input jack