Fyi... I referenced the part number you had in the vid for the rotos and they are the 296mm ones. Once you change them to the 320mm rotors the gap between the rotor and caliper will be gone. Good vid and thanks for the info on painting the calipers!
From now on, I'm watching you guys on a brand spanking new 65 inches LG QNED80 series ! Awesome Life is Good! Awesome, superclean is stuff on a whole other level
I was always told that any modifications to the diverter/bypass valve on these cars is not good because of the MAF. I’ve heard it runs really rich and can cause oil dilution and more problems.
@@Allwayskind6 Busted, not so much. It's very much inconclusive. Personally, as a daily driver I would err on the side of caution but that's just me. Everyone is free to do whatever they choose to their own cars.
Great video, too bad your parts list in the description is missing the most important stuff.... The brake lines and the rotors. I have the calipers and looking to do this same swap, but need those two pieces.
Well I think I’ll go this route with the brakes instead of going with a new pair of BBK , if it will save me $500… any specific year I should look for on the calipers ?
@@ahcgarage Hello AHC, I very much appreciate your content so if you do get around to making this video could you also test out if any 19 inch wheels clear these? I really want to use the y spoke fronts of the NSX as they are basically the same dimensions and bolt pattern from my understanding. I've read the 19 inch aspecs from the TLX clear, but would be a nice addition to the video if you do. Much appreciated for all you do!! I know wheel weights are important to a lot of people.
Hahah... okay, I'm not totally convinced that whoever has the camera manned on the side of the road in those last shots isn't using their mouth to go "TSH tsh tshh", but fun times... hahahah
So I think it’s very important to put in this video for you eighth GEN guys. You can do this for the eighth Civic ninth GEN 10th GEN 11th GEN the rotor in caliber combination will work for all those vehicles you’re welcome.
Another great video. Would painting the caliper with clear coat (after applying the stickers) make them easier to clean in future and also help embed the sticker from peeling? Appreciate your input.
Awesome car and thanks for all you guys do. 11th day into ownership and me and wife absolutely love the car. She would love red brakes but would like to know if Honda/Acura doesn't have brembo that fit without issues? Keep up great work.
love all the content homies. I didn't see episode 9 of the integra a spec build, is it not uploaded or was there just a small error with this one being episode 10?
You might be able to use nissan 350z rotors, and they are bigger. I have seen people use the 350z rotors on the 10th gen civic with acura rl calipers. Would love to see if they do work...😮
@@ahcgarage Based from what i googled so far, 2015-2019 Nissan Rogue S or SL (Not the SV) has the 3rd Row and the diameter is around 320mm, please correct me if i am wrong. thank you as always
Hey I have an 2023 Acura Integra a spec. Ive never modded a car and have been looking into it recently. If I get a bov on my factory car should I Get something else before that, and would it mess up the warranty? Thanks! you car sounds Amazing
Ordered mine for my Si. But it is gonna be Yellow Spoon! I want something striking! Any issues so far on high speed or anything? I was thinking about buying the hub for the rotor, but you didn't use it. Thanks in advance
Why not the TLX 2020...what is the different..what I need to change in my car..is going to be a good video... no more content of the Last Natural J35y6 v6 from Honda in a sedan .
I have a 2021 Honda crv with upgraded turbo and the works but the stopping power is not the best. Are the specs on that the same as my crv and any suggestions on what might fit when it comes to BBK upgrade
Our long and short fuel trims are ok at the this. We have done all of the PRL's bolt-on on our previous vehicle, including the high-volume PRL intake system. Check out this full playlist: czcams.com/play/PLL2M4mvNCP_ySBh6cRBzQmMX587cTD4Lu.html
@@ahcgarage hows u car running with the boomba adapter, will u feel any differents good or bad. I did order one, i havent put it yet tho due to idk what do to engine etc. i know this topic been out there for a while now, but i figure with the technology they got now it should be ok i guess. I got the same car u guys got and i was just curious about it if i should install it or what ….
every Nissan Rogue Rotor I pull up from auto stores the Center hole is too big from the Integra and civic unless the dimensions are wrong for the Integra and Civic, are you sure they were from Nissan Rogue 3rd row? if so what year of Nissan Rogue? I am really wanting to do this set up any info or Dimensions on this part of set up would be greatly appreciated, Thank you
I love watching these videos, about mods on Integra’s just wondering why you don’t reply on questions about the Rotors? You have another question about it you have not responded too. Would love this question answered.
Despite its polarizing debut, I’m just sort of happy we can continue hearing the Integra name again and seeing people enjoy the cars.
Yes, thank you for your feedback. Couldn't agreed more
The refinished Brembos are a perfect upgrade for this impressive Integra. Thank you Mike, Jonathon and Brian. 👍🏻🇺🇸
Our pleasure!
Fyi... I referenced the part number you had in the vid for the rotos and they are the 296mm ones. Once you change them to the 320mm rotors the gap between the rotor and caliper will be gone. Good vid and thanks for the info on painting the calipers!
320 the same for the rogue
From now on, I'm watching you guys on a brand spanking new 65 inches LG QNED80 series ! Awesome Life is Good! Awesome, superclean is stuff on a whole other level
Watching us in style. I like it 😄😄
This brake kit looks so good man! Congrats and nice video.
Appreciate it!
The Acura sticker was the cherry on top. Going to do this for my 10th gen SI soon. Thanks for the video!
Right on!
I look forward to these videos every Saturday morning just like I did Saturday morning cartoons
Thanks very much!!
Bigger rotors is a good idea!
Agreed!!
Should get the little “by Brembo” stickers to put under the bottom right of the Acura sticker.
That's a great point
"Sounds like Tire losing air" 🤣 🤣 🤣
Haha
I was always told that any modifications to the diverter/bypass valve on these cars is not good because of the MAF. I’ve heard it runs really rich and can cause oil dilution and more problems.
We are currently monitoring it and haven’t not experienced this issue
This has myth busted a while ago. Search up adapter plate for 10th gen si👍
@@Allwayskind6 Busted, not so much. It's very much inconclusive. Personally, as a daily driver I would err on the side of caution but that's just me. Everyone is free to do whatever they choose to their own cars.
I would enjoy seeing you guys work on the older Intergras, CRXs, as well as Prelude.
We will have a full EF CRX series coming to channel very soon
Sickkkkkkkkkkkkkkkk
@@ahcgarage Thank you, looking forward. I watch every single video you guys release.
Sounds like the Teggy wants to tell a secret lol Clean work as always :)
Thanks 👍
That BOV adapter will cause the car to run rich. I had it on my 17 civic SI.
We have not experienced with this issue yet
There is a company that sells a set of hub rings for the Nissan rotors to center them on the Honda hubs.
Noted, thanks!!
What’s the name of the company
Great video, too bad your parts list in the description is missing the most important stuff.... The brake lines and the rotors. I have the calipers and looking to do this same swap, but need those two pieces.
The back of the new Intergra looks like the Genesis Coupe, now their Brembos fit directly on it too?! Coincidence not, LOL.
350z brembo rotors might fill in the gap pretty common using those when doing big brakes on older honda and acuras
Yes, we have done a few with the TSX.
Well I think I’ll go this route with the brakes instead of going with a new pair of BBK , if it will save me $500… any specific year I should look for on the calipers ?
Nice upgrade, but wish could buy brand new first for my 2023 Elite a spec Canada 🇨🇦 version MT
Please do the MDX base brembo upgrade video! Ahh!! 😂
Will do haha!
@@ahcgarage Hello AHC, I very much appreciate your content so if you do get around to making this video could you also test out if any 19 inch wheels clear these? I really want to use the y spoke fronts of the NSX as they are basically the same dimensions and bolt pattern from my understanding. I've read the 19 inch aspecs from the TLX clear, but would be a nice addition to the video if you do. Much appreciated for all you do!! I know wheel weights are important to a lot of people.
Car is looking good Jon! Great job guys!
Thanks for always tuning in
The Acura sticker is the cherry 🥰
Yes indeed!!
Love the video! The Integra is looking good! Love the Mugen wheels
Glad you like them, and thanks for your great product.
You guys are making me choose this car instead of an SI !
Beautiful 😍 Acura 👌🏾👍🏾😊
Cheers!!
love this car so smoothhhhhh🔥
Cheers!!
Hahah... okay, I'm not totally convinced that whoever has the camera manned on the side of the road in those last shots isn't using their mouth to go "TSH tsh tshh", but fun times... hahahah
Haha!!
Got this on my integra. on the first day, the car is backfiring and has stalled 2 times now. taking it off.
We didn't experience any issue. Have you check if the seal is pitch or you might have a vacuum leak?
@@ahcgarage i took it to a shop they think it’s the maf that needs to be tuned
@@andrew.p6147 with the bov?
Acura needs to bring back named cars. Legend, vigor and so on.
So I think it’s very important to put in this video for you eighth GEN guys. You can do this for the eighth Civic ninth GEN 10th GEN 11th GEN the rotor in caliber combination will work for all those vehicles you’re welcome.
What yes Hyundai genesis brembo were this (I know it was for the r spec 6L). Looking to do this to mine! Ty!!
How would this sound on a cvt
very clean build, yall
Appreciate it
Do they sell that blowoff valve for the type s tlx? That actually sounds dope lol
They actually do, here's the link:
www.boombaracing.com/honda-acura-1-5t-2-0t-3-0t-bypass-valve/
Another great video. Would painting the caliper with clear coat (after applying the stickers) make them easier to clean in future and also help embed the sticker from peeling? Appreciate your input.
Yea
Can I send u guys my integra to work on😅 I’m too scared to mess mine up😂😂 u guys make everything look. Good😊
Any word on installing Brembo calipers on the rears?
You guys are inspiring me to do the same to mine.
Thank you 😃
Looks wicked! Which etsy store you get those reflective decals?! I would love to get those installed once I power coat my brembo!!
john should get the euro market integra headlight to get the clear marker light version of the head lights if they sell it in other narkets
Great job like always guys !!!!! 💯👍🙏💪🔥
I'd do "Acura" but in black instead of reflective
Great recommendation. We might try it another time
Check Kia Stinger GT 3.3 brake rotors
Noted, thanks!!
That Y-49 crx in the background 😏
Great catch, coming soon!!
Awesome car and thanks for all you guys do. 11th day into ownership and me and wife absolutely love the car. She would love red brakes but would like to know if Honda/Acura doesn't have brembo that fit without issues? Keep up great work.
They don’t .. these brembos are your best bet
@@secret7aa thanks
*SATURDAYS ARE FOR THE BOYS*
😎😎😎
Cheers!!
I Have this brakes on my honda accord 2005 and the brake disc coming front the (nissan rougue 3rd row )
I refused to look at such a beautiful car being so slow for its look
love all the content homies. I didn't see episode 9 of the integra a spec build, is it not uploaded or was there just a small error with this one being episode 10?
Any performance issues with the BOV adapter so far? I want to get one for my integra but dont want to have issues with the car cause of it.
Damn, this car is perfect!
I'd go with the acura sticker! It's good for an extra 5hp.
😁😁
Dat small one bro fire 🔥
Did you get away with only bleeding the front two calipers ?
Can you add part numbers? Rotors and calipers/pads?
Sure!!
You might be able to use nissan 350z rotors, and they are bigger. I have seen people use the 350z rotors on the 10th gen civic with acura rl calipers. Would love to see if they do work...😮
i think they gave you the wrong rotors... the nissan rogue rotor i got is alot bigger than that one.
Question…. Are the oem brake calipers on this car the same ones on the 11th Gen civic ?? Your help highly appreciated
Will work on the 11th Gen Civic Si as well
Hi, fantastic job as always, may i know the part number of the rotors? thank you
We will list that on our description soon
@@ahcgarage Based from what i googled so far, 2015-2019 Nissan Rogue S or SL (Not the SV) has the 3rd Row and the diameter is around 320mm, please correct me if i am wrong. thank you as always
Look into a 350/370Z Nismo rotors
Noted, thanks.
Hey I have an 2023 Acura Integra a spec. Ive never modded a car and have been looking into it recently. If I get a bov on my factory car should I Get something else before that, and would it mess up the warranty? Thanks! you car sounds Amazing
Nice🔥💪💯👍
Thanks 🔥
so the fronts are like the tsx's? they bolt right on the tsx also i think on 1st gens
We have yet to test them on a TSX
Does it need brendo breaks though, it looks nice don't get wrong, but seems unnecessary for this type of vehicle
We have add quite a bit of bolt-on and planning to do much more, therefore this larger brake upgrades will be very ideal and safer.
@@ahcgarage can't wait to see it
Any know if these brake kit will work on all 11th gen models? I have 22 Ex… please and thanks
Ordered mine for my Si. But it is gonna be Yellow Spoon! I want something striking! Any issues so far on high speed or anything? I was thinking about buying the hub for the rotor, but you didn't use it. Thanks in advance
We did not experience any issue
Got at 2024 Integra and I want these brakes on mine so bad. Can u tell me where I can find em.
Why not the TLX 2020...what is the different..what I need to change in my car..is going to be a good video... no more content of the Last Natural J35y6 v6 from Honda in a sedan .
I have a 2021 Honda crv with upgraded turbo and the works but the stopping power is not the best. Are the specs on that the same as my crv and any suggestions on what might fit when it comes to BBK upgrade
Unfortunately this BBK setup will not bolt up on the CRV
Those calipers make me think about clown shoes for some reason🤔
Ha!
Did you guys raise the 23 integra back up with a taller lowering springs than before?
Hey quick question i have the bov but bow imscared to put it on will it mess my car up in the long run ?
Do you know if the brake upgrade would fit the stock rims?
Good question, we will test and get back to you
Great!
👍🏼👍🏼
Which goodridge stainless lines did you go with? I’d assume that they’re the same for 22+ civics
Yes sir
@@ahcgarage which ones did you use though? Lol
Does anyone know what year Hyundai Gen calipers work ?!?! I’ve seen a lot of different years on EBay?
wow can I get a similar assembly for my Honda Element?
Those tiny rotors with the huge calipers 😂
how much is the brembo brake kit ?? Nd is it good for my 2016 civic ext ??
Will BOV adapter work and fit on 1.5 2022 Honda Civic EX CVT?
Would you it be bad to put the boomba bov adapter on a stock 6MT integra?
Shouldn’t be an issue
Are the tuning and modifying possibilities the same for the cvt integra as the manual integra?
Yes
@@ahcgarage and would upgrading the turbo or increasing the psi break the cvt?
Do you know how wide the caliper mounting points are on the integra?
What would be the cost to do the break upgrade this way?
This option will run you around $1100
Is it possible to add the rear calipers from the genesis as well ? I’m thinking about doing this upgrade to my civic
Unfortunately the rear calipers are not compatible with the Integra or Civic
That sucks thanks
Wich year was the rotos of Nissan Rouge models 3 row?
Does the hks blow off valve fit the Integra 2023
I have the adapter plate for the 10th gen si
Do you guys know if it will fit the same?
They offer this style of BOV for many Civics applications. Check out this link:
www.boombaracing.com/honda/
Whay brake uograde for the 2020 rlx hybrif?
Oof, the fuel trims on that car.
Did you guys already install an intake?
Our long and short fuel trims are ok at the this. We have done all of the PRL's bolt-on on our previous vehicle, including the high-volume PRL intake system. Check out this full playlist:
czcams.com/play/PLL2M4mvNCP_ySBh6cRBzQmMX587cTD4Lu.html
@@ahcgarage hows u car running with the boomba adapter, will u feel any differents good or bad. I did order one, i havent put it yet tho due to idk what do to engine etc. i know this topic been out there for a while now, but i figure with the technology they got now it should be ok i guess. I got the same car u guys got and i was just curious about it if i should install it or what ….
Can those caliber fit on a 2020 Acura RDX
We do not believe so
can try the 08 nismo 350z rotors
We will look into alternative options for larger rotors
Did we ever find bigger rotors
every Nissan Rogue Rotor I pull up from auto stores the Center hole is too big from the Integra and civic unless the dimensions are wrong for the Integra and Civic, are you sure they were from Nissan Rogue 3rd row? if so what year of Nissan Rogue? I am really wanting to do this set up any info or Dimensions on this part of set up would be greatly appreciated, Thank you
I love watching these videos, about mods on Integra’s just wondering why you don’t reply on questions about the Rotors? You have another question about it you have not responded too. Would love this question answered.
What year genesis?
2013
Bueno
Cheers!!
Great video. Would the brembos fit a 18 Accord ? Also do you guys have a link for them?
We have not done on a 2018 Accord and do not believe this setup will work directly to that model
They work as well that’s what I have been told😊
Hows the BOV adapter so far?
Hey what were the tools used to install and take apart the boomba bov adapter??!
What tool did you use to take out the t30 screws!! Having big trouble with getting them out
What sizes were the swivels and rest of the tools?!