Hilti TE 706-AVR field change. Saved 150 Euros! After changing burned field. Motor disassembly
Vložit
- čas přidán 17. 10. 2017
- In his video I have disassembled Hilti TE 706-AVR demolition hammer. It was not working and it just had the service light blinking.
After disassembling the motor I found that field is burned out. I used field from scraps and it worked fine so I saved $200!
Be sure to like this video and subscribe for more fresh updates! We try to put out the best content for power tool repair, helping you keep your kit in working order!
~-~~-~~~-~~-~
Check out the below links where you can find new versions of some of these quality brands. That is, of course, if your repairs don't work! I find amazon a great place to purchase new tools, considering their selection offers the best pick of all tool accessories as well. As an Amazon Associate I earn from qualifying purchases.
Makita: amzn.to/2IBBDso
Bosch: amzn.to/3o4DmH2
Milwaukee: amzn.to/37iilCI
Dewalt: amzn.to/3nZVaDj
Metabo: amzn.to/31BeEEL
Thanks for visiting! #Handyman
Thinks a lot !
Im french and this is only one vidéo i thougth to repare my te 700:)
Sorry about my accent ;)
Hello my friend. Just shine a small red laser at it for 5 seconds and it's reset. The play lasers work fine the ones that kids use
Is that a MONTOMBO drill ya got there 🤗 that came apart to easy lol
great video
Hi i have one just like this but it would work for a few min and stop hammering after. any idear what to check
Hello. Do you know how much oil I need to put in a Hilti TE 18 M?
I change some seals, and now I have to refill the main housing with oil.
Thanks for the answer
Very good professional
Thank you
Love the channel, great delivery, thanks for sharing. Best wishes from Ireland
great video, thank you. i have a TE 706-AVR too it runs but does not hammer, any ideas on how to fix this?
alan stewart hello,
The problem must be at the conecting road ( is broken ) or the piston ( is burned).
After you identify the broken part, you should change even the 2 orings of puston and striker and put inside new oil
Why connecting rod for piston is broken what the problem or cause?for TE 706 & TE 700..
Opa amigo como faço para testa somente as placas eletrônicas
Comment je trouve le pièces détachées module électrique, merci d’avance
Hi, thanks for your videos, could you explain to me how to remove the TPS board, the red light comes on and I have tried everything but I am not able to make it work. Thank you.
you need reset the tool or made a by pass, the tps board is to protect the tool from theft
hello andrius, if these hammers do not have brushes, what can be the reason for the red light to come on?
If it blinks then it's electric problem like bad contact. If it just flash on and stay it's time for maintenance
Great Video
My Hilti TE706 turns on but after a couple of seconds it turns off.
Do you have any idea what it can be?
Hello, you need to check motor and connection rod
Card repeyar
Greeting from greece my friend,very nice video.tell me what kind of grease or oil i use in gear box of rottary hammers. Make videos with differents tools,thanks any way
ΚΩΣΤΑΣ ΠΑΠΑΤΡΕΧΑΣ
Hello
My advice for you is that different kind of tools use different lubricants products.
Hilti has their own oil, TURMOPOIL 20 HD
Bosch has sometimes oil and sometimes grease.
And makita so on.,dewalt , metabo, uses grease tc
Hello,
Hilti TE 706 AVR indicate red light when plug in and not working.
Hello, if it flashes check power cord or replace it. If power cord not helps you need to make maintenance for your tool.
If Red light always on you need to make maintenance and reset service light.
good evening
congratulations for the video!
I have a hilti te 700 what is the amount of oil?
thank you
Hello, if I remember good it's 150 ml
hay sir how i can repair hilte te 700 Avr
Great job, my hilti 796-avr has the similar buzz problem, do you have a link i could buy good used parts?
How to unlock error from electronic?
Сколка масла надевать ?
Hi how to reset te70 I already clean but still red light
If you are in UK you can send it to service
Buenos dias porque mi hilti 76 en ratos funsiona y luego se queda como en neutral me podrian ayudar y que grasa o aseite yeva grasias espero me puedan ayudar
Broder una pregunta tú Hilti se bloquea cuando requiere mantenimiento y si es así a donde lo llevas ya que en la Hilti es muy caro
Hello everybody, Hilti TE 706 How do I find the AVR control unit? Thanks
hello, did you manage to override the TPS of your 706 drill?
hello thanks for your video you really helped me I have this tool but it has problem in it's electronic control unit. Hilti asks me too much money to replace it Do you know how to fix it? or to bypass it?
Thanaksasar
Can u run the avr motor with out power supplier of hilti but alternative power supply
Hiltite500x
Bonjour à tous, j’ai une hilti TE 706 AVR, je recherche pièces détachées module électronique, merci
bleis iwhant have namar
Pls hindhi