I make Spoked Steel Wheels in an Industrial Style, using Rebar for the Spokes - Rebar Project
Vložit
- čas přidán 14. 10. 2023
- I make Spoked Steel Wheels in an Industrial Style, using Rebar for the Spokes. I love anything industrial and if it has rebar in it then it is even better, and this project is one of my favorites, maybe because of the bit where I bend the flat bar into rings, using just a hammer, I have done this before, but I have never tried to video it before.
It was a fun rebar project to make and I hope you found something of use in my video or at least found it entertaining.
The wheels are 215mm (8.5 inches) High, the flat bar is 6mm thick (1/4 inch), and 50mm wide (2 inches) The rebar is 26mm across the widest part.
The main tools I used, were a MIG welder, angle grinder, drill, Hammer, and bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY - Jak na to + styl
This guy reminds me a lot of my dad, he was always making some cool project like homemade fireplace tools complete with with fire tongs, poker, shovel and stand. I still have a huge completely functional bear trap made with teeth and double sprung. He even made his own hot rivets he forged and hammered in. Of course he did that forging on his homemade anvil. I sure miss him. ❤️
I give u proms of keeping up with your dad memory’s that’s what is all about and telling his stories thump’s up 4u👍👍👍👍
You dad reminds me very much of my dad, I learned a lot from dad, it was him who made me who I am today, Cheers! to your dad and mine. Thank you for your comment.
Wow Gavin, fantastic work. Anyone who can make a ring out of steel like that, without a ring roller, gets a huge thumbs up. I admire your metal working skills. Thank you
Thank you very much, I am glad you liked it, and I very much appreciate your comment. Cheers!
@@GavinClarkdiy
Witam
Seredecznie pozdrawiam z POLAND🇵🇱
Tylko dziękować BOGU za talent który raczył Tobie podarować.
Życzę dużo zdrowia i ciekawych pomysłów oraz dzielenia się z ludźmi Swoimi umiejętnościami.
Pozdrawiam Serdecznie.
@@quiz2993 Dziękuję bardzo, doceniam Twój komentarz. Pozdrowienia z Australii.
No fancy tools just pure skill. I love what you do from Allen, Texas
Thank you very much, I appreciate your comment Allen, Cheers! and Greetings from Australia.
I concur from Idaho.
3
Ĺ
Another Texan , from Houston !!!!! I love it
It's rare to see someone on yt do everything correctly. This guy is a pro.
Outstanding video and craftsmanship. Thanks for sharing.
. Excellent idea , execution , succinctly explained ......... without the normal cr**ppy background music , gushy excitable over the top high fiving with your mates , closeups of the dog , cat , wife , kids no ton of other sh**t on the bench , underfoot ...... brilliant .
Your creativity is inspiring. I've used rebar for cooling trays on my bench grinders. I used it for my handle on my bandsaw stand also. Just beautiful work man!
Thank you very much Ross, I appreciate your comment. I love the look of rebar. Cheers!
Nem drága,praktikus megoldás.Köszönöm
Another excellent engineering project Gavin. Love it.
Thank you very much Mike, I appreciate your comment.
Mate - your videos just keep getting better. I also really appreciate that you take the time to explain layouts design and thinking. Rather than just only doing assembly. Really excellent content - thank you.
Thank you very much, I am glad you liked it, and I very much appreciate your feedback.
Outstanding job, Gavin!!! Thanks for posting!👍🏻👏🏻👏🏻👏🏻
Thank you very much Lemev, I am glad you liked it and I appreciate your comment.
Thank you Gavin, great idea and skills.
Thank you very much, I am glad you liked it.
Mechanical Art like that should bring riches!
I hope you teach...young folks need your experience...amazing faber!!
Thank you very much, I am glad you liked it Ray, I very much appreciate your comment.
Loved the jig for the spokes, how to set out the degrees and the hole for the center made it so much easier by the looks of it. The wheels looked fantastic when on the axle, cant wait to see the finished product.
Thank you very much, I am glad you liked it. I appreciate your comment.
Wow, those look like a piece of art. They can be used as an ab wheel for exercise.
This was incredible to watch. Thank you for sharing.
Thank you for watching.
Nice work Gavin! Thanks.
Thank you very much Waterboy, I am glad you liked it.
Really enjoy watching your work, thanks for sharing!
No problem, thank you very much for watching, I am glad you liked it.
I would be down with a set of these for my DIY tool chest instead of inflatable tires. Theyd look exo on the big chunky coffee table too.
Perfect axles for the outback . Love the real world CAD , same as I used for last 50 years , cardboard assisted design. Ripper mate 🤘🏻
Thank you very much, I am glad you liked it. Cardboard was the way I did it too many years ago too mate, Cheers!
Dang, Gavin! You can't go so long between videos where you make neat stuff. I start having withdrawal symptoms...shakes, fever, uneasiness. I always enjoy your work. Thank you!
Doctor Gavin says just watch them all again, problem solved, and my bill is on the way. Hahaha, Thank you very much, I am glad you like my work. Cheers! mate I love your comment.
Brilliant. When I saw the final product at the beginning I thought, "oh this time he'll need a serious tool to bend the rim." Yeah, right 😅
Hahaha, smart people would have used a bit of 8 inch pipe and cut it up, or used a bender, not me, I use a hammer. Cheers!
Good work! Thanks for sharing!!!
Thank you very much for watching, I am glad you liked it.
You are truly a skilled craftsman! Thank you for sharing your knowledge!
Thank you very much, I am glad you liked it.
Great job !
Thank you very much Jim.
You sir are a true master! Thought you were crazy when you started whacking that flat bar. Turned out fantastic! Way to go!
Thank you very much, I am glad you liked it. I appreciate your comment Jay. Greetings from Australia. Cheers!
G'day Gavin, your an absolute Artist !!! Love your work!!!
Thank you very much Michael, I appreciate your comment.
Perfekt wie immer 👍 Danke für's teilen . Grüße aus Norwegen 🇳🇴
Vielen Dank, ich freue mich, dass es Ihnen gefallen hat. Grüße aus Australien.
Very impressive!
Thank you very much.
Gavin, my man, you never seize to amaze me. You are the ONLY guy on this planet, that has made an ugly piece of structure material, into an art masterpiece.
Hahaha, Thank you very much, I appreciate your comment.
Awesome job.
Thank you very much.
Always love your work, this is no exception.
Thank you very much, I appreciate your comment.
Really well done. I could see two sets of these becoming an old style warehouse cart.
Thank you very much, I am glad you liked it. I love those old carts. Thank you for your comment.
Gavin great work I enjoy all of your videos you do super clean work and looks great. Thank you very much and keep the videos coming.
Thanks Stan B👍
Thank you very much Stan I am glad you liked it. Cheers!
Hola Gavin, es para mí un placer poder verte trabajar y fijarme en tus trucos que después yo utilizo para mis proyectos particulares, ver como sujetas con las escuadras, con el tornillo de banco, taladro, etc.
Me encanta ver tu sabiduría en mis pequeños trabajos, gracias una vez más y cómo siempre saludos desde España.
Muchas gracias, me alegro que te haya gustado. Te deseo lo mejor para tus futuros proyectos. Saludos desde Australia.
Fantástico GARVIN, genious
Muchas gracias, me alegro que te haya gustado.
GREAT JOB, BUDD, ENJOY YOUR CONTENT.
Thank you very much, I am glad you liked it. I appreciate your comment Patrick. Cheers!
Love it!!!!!
Thank you very much, I am glad you liked it.
Came out great
Thank you very much, I am glad you liked it.
Thank you Gavin.
No problem, thanks for watching.
Really terrific work. I always get good ideas here. Thanks
Thank you very much, I am happy you liked it.
First class work, thanks for your videos.👍👍
Thank you very much Alleycat, I am glad you liked it.
Thanks for sharing. You always have something to teach and give to others. Saludos desde México
Thank you very much, I am glad you liked it and I appreciate your comment. Greetings from Australia.
Another great piece of work Gav.
Thank you very much Graham, I am glad you liked it. Cheers! mate
Great work and inspirational for anyone trying to make something from available resources instead of putting out huge dollars, enjoyed, cheers!
Thank you very much, I am glad you liked it. Your comment is very much along my idea of making things and using simple tools if I can. I appreciate your comment.
Excelente trabajo....!!
Muchas gracias, me alegro que te haya gustado.
Great great work!!
Thank you very much.
You have that industrial look down to a science with minimal cost and just a little bit of sweat🤗😎🤗😎
Thanks Garth, I do love doing these things. Cheers!
Great work, good show.
Many greetings from a shop in Germany.
Jörg
Thank you very much, I am happy you liked it. Greetings from Australia.
Great wheels Gavin! I have made some steel wheels for my hit and miss engine carts. Instead of bending band iron I had a steel shop cut 3 inch wide pieces of 8 inch diameter steel pipe. The five spokes is great, not often you see 5 spokes, nice touch! I also like your hub design, plenty of "bearing" surface but looks proper on the axle end. The castle nut is another nice touch that makes it look the part! Thanks for sharing. Cheers!
Thank you very much, I am glad you liked it. Cutting 3 inch strips of pipe would be the smart way to do it, I don't do "smart" I have a hammer. Hahaha, I appreciate your comment. Cheers!
The layout on the white piece of board was a strike forhead moment, I have been burning paper layouts for years. Seriously, thanks, man. The wheels are pretty dang cool, too.
Thank you very much, I am glad you liked it. I use paper too, but if I can make a quick template from an off-cut it is much easier. I appreciate your comment. Cheers!
Attaboy Gavin. Very well done.
HNY
Thank you very much, I am glad you liked it. Cheers! Clint
Just brilliant
Thank you very much, I am glad you liked it.
6:27 amazing friend
Thank you very much, I am glad you liked it.
That was an awesome way to make a circle from a flat stock. Great job, nice video.
Thank you very much, I appreciate your comment.
Very impressive 👍 thanks for the video!
Thank you very much, I am glad you liked it.
nice project, thank for share, best regards from Venezuela
Thank you very much, I am glad you liked it. Greetings from Australia.
Excellent travail💪, merci pour ta vidéo
Merci d'avoir regardé, j'apprécie votre commentaire.
Impressive! Sincere regards from Argentina!
Thank you very much, I am glad you liked it. Greetings from Australia.
Good job 👍
Thank you very much.
LIFETIME GUARANTEE 💯 BEAUTIFUL JOB .TRADESMEN of NOTE
Regards Richard 🇿🇦
Thank you very much, I am glad you liked it Richard. Greetings from Australia.
Beautiful work señor😮
Thank you very much, I am happy you liked it.
*Awesome work!*
Thank you very much, I am glad you liked it.
Amazing skills!!!
Thank you very much, I appreciate your comment.
Nice work
Thank you very much.
Bien chingonas las ruedas 👏
Muchas gracias, me alegra que te haya gustado y agradezco tu comentario.
And today on the screen : The Master of bending grinding and welding.
Extremely impressive, as usual !
Greetings !
Thank you very much, I appreciate your comment. Greetings from Australia. Cheers!
Great job.... SIR GEE 🙏❤️
Thank you very much, I am glad you liked it.
Brilliant well done buddy so clever I need to make sone wheels like this only bigger thanks for showing me fantastic love them wheels so strong cheers Larrysullivan in london
Thank you very much Larry, I am glad you liked it. I wish you the best for your project. Greetings from Australia.
chingon señor gavin
Muchas gracias, me alegro que te haya gustado.
Those are some cool looking wheels! Reminds of an old radial airplane engine. Thanks!👍👍👍
Thank you very much, I am glad you liked it.
Great video. Keep them coming
Thank you very much, I am glad you liked it.
that looks AMAZING man... you have a really good eye for that industrial looking metal style that I love. keep up the great work!
Thank you very much, I am glad you liked it Chris. Industrial style metal is my favorite. Cheers!
Благодарю за труд!
Большое спасибо за просмотр, и я ценю ваш комментарий.
Awesome job Gavin, remind me of when I need something I just make it myself.
Thank you very much, I am glad you liked it. It is good to be able to make it yourself, Cheers! Charles
Greetings from ,New Jersey USA. YOUR Awesome, love your work !!!!
Thank you very much! Greetings from Australia.
Well done, creatve and beautiful
Thank you very much, I am glad you liked it.
Great work! Amazing!!! I really like it!
Thank you very much, I am glad you liked it and I appreciate your comment.
Super..
Congratulations 👏👏🎉
Thank you very much, I am glad you liked it.
Good work, I took on a project that was a cart that held a large bell.I had the wheel tire rolled for me but I have used the cold forming method on lots of other projects it really is a cool way of doing it.
I do think it is a cool way to do it too, and you appreciate the job more when it is finished. Lots of fun, Cheers! Kathleen.
Golden hands!!!👏👏👏
Thank you very much, I appreciate your comment.
Nice job brother.
Thank you very much John. Cheers!
Love 'em 💖👍
Thank you very much, I am glad you liked it.
So amazing. Your use of common sense and common tools, to make amazing and useful products. Thank you. Love it. Keep going.
Thank you very much John, I appreciate your comment.
Master at work! Luxusní práce 👏
Thank you very much, I appreciate your comment.
You always make it look easy Gavin! Nice work sir!
Thank you very much Earl, I am glad you liked it. Cheers! mate
Your work is always clean and on point plus you make it look so easy and that is true talent
Thank you very much Bradley, I appreciate your comment mate.
immortal construction
Thank you very much, I appreciate your comment.
another great vid Gav
Thank's mate, Cheers!
Impressionante.
Muito obrigado, fico feliz que tenha gostado.
Nice wheels Gavin, I’m sure they are for a larger project. Watch this space!!!
Thank you very much, I am glad you liked it. Yes, they will be on a future project, when I get time to do it. Cheers!
Love your videos Gavin, have learnt a lot of tips and tricks. 👍
Educational work without all the "jibber jabber" that many other youtubers seems to enjoy😂
You are the real deal. Keep on✌️
Thank you very much, I am glad you liked it, and appreciate your feedback. I wish you the best for your future projects.
Cold working that flat stock looked like a chunk of work!
Yes, no need for me to go to the gym, I do enjoy doing these things. Cheers!.
Me encanta ver cómo trabajas, replanteando y ejecutando excelente 👍🏼. Saludos desde Barcelona.
Muchas gracias, me alegra que te guste mi trabajo. Saludos desde Australia. ¡Salud!
Hello Cavin
Nice to see you at your workshop
I haven’t seen you long time I don't know why, now happy founded you again.
I have had a few other things on so I have not made many videos, welcome back.
nice work
Thank you very much.
Nice Work 👍🏻👊🏻
Thank you very much.
Impressive skill and craftsmanship! Thoroughly enjoyed watching!👍🏻
Thank you very much, I appreciate your comment.
Awesome
Thank you very much, I am glad you liked it.