I have watched this video multiple times. It really helps to keep me focused on my basic efficiency goals that I have. I am trying to get more efficient at production. I follow so many turners on CZcams, but I relate to your technique the most. I really appreciate the variety of videos that you upload, Thanks again for sharing.
I so enjoy this video.. I been turning for 55 years.. years ago we only had high speed steel. Then m2 steel was developed which is 5-8 times better.. in the last 6 years we see Carter and sons in Seattle develop m42 steel which is way beyond m2.. please don’t waste you money.. but m42.. this steel is as good as carbide and does well on resin or anything you like.. life is way more fun with M42.. I still use the English grind for more than the bottom of the bowl too.. I hope you all happy times.. enjoy.. ☺️👍
Thank you very much. I’m sure I’ll be referencing this again. Your time , technique and detail is greatly appreciated. I have a shop smith I keep just for lathe and band saw. I don’t like the lathe. I just acquired a 70s craftsman lathe in good shape and seems superior to Smith. Ive only turned a few things as needed knobs , top for lantern I made and such. What I’ve found though is when I’m turning I don’t want to stop lol. I really want to do more and excel at it. It draws me in like siren calling. Watching shapes appear is quit a feeling and very satisfying. Your small projects and direction should be a great start to a more serous path forward. The grinds are important so paying close attention. The safety tips are great to. You seem to love what you’d and share that with out holding back. That’s what I’m looking for as a novice. 👍
thank you for pointing out that you want the whole surface of the bevel of the tool to be touching the wood's surface. i'm going to keep that in mind the next time i'm on my lathe. cheers!
For years there was no Wolverine or rapture system.. In the 50’s and 60’s we were taught to use scrapers.. that just rips out end grain and requires sanding. Then a English man Peter Child introduces the grind like the roughing gouge and other bowl gouges.. Now we have the Wolverine system .. it is good and and more has been pushed for scrapers.. in a different way.. much like the scrapers with hook before sand paper.. The result is more control and less sanding if done right.. All these techniques are great to learn and knowing when to apply them is worth much.. be well all..
Notice his set up on rouging out gouge.. this is English grind.. I used this method for 35 years on a homemade jig.. it’s simple and easy.. When he used swept back grind this is known as the irish grind with the rapture system.. Both methods are great and I still use both.. you do not need the diamond like wheels to continue.. White wheels work just as well..
I'd love to have one of those Sorby sharpeners. But, for the Oneway Wolverine setup, there are some pretty handy sharpening jigs called Raptor Set-Up Tools. I think you can buy them separately, but the set contains 35, 40, 45, 50, and 60 degree. They can be used to set the "stick-out" of that slider thing as well as for platforms. I am not sponsored by anyone. Just providing a little info. Cheers!
Until the pandemic, I was an IT guy and wood worker. I bought a HF lathe a month ago. I wouldn't be turning without your very helpful videos. I need to change my handle technique. Great stuff Lewis! Thanks 😊
Lewis very well explained for all levels of turners , but with you actually doing the cuts as well is just fantastic to see, and it makes what you are explaining works
That was very good, Lewis. Belongs on a subscription service for $10 per watch. It was nice to have a lot of things affirmed and to learn a good number of things. As you alluded to a few techniques, I was waiting to hear Stewart Batty's name. When he emphasized the pressure on your tool be down on the toolrest, letting the wood come to the tool, was the day I stepped forward in my understanding. Or, rolled forward. I can't anchor a tool against myself from my seated position, but I often find a third point of contact for my right elbow on the workbench or lathe bed. Adapt and move on. Great instructional!
Thanks Jay! There is always a way for sure! I have been floating the bevel for a long time but didn’t have a name for it until I saw the Batty video a few months ago. Hey I’d be cool with $10 per view but then the quality may have to go up. I appreciate you watching
Lewis, That was a really fine explanation of proper tool grind and use, kinda reminded me of high school shop class back in the 90s. Thank you for taking time to film, edit and post this video
Fantastic demonstration I am an old cabinet maker but new at turning and find it very helpful when someone takes the time to show me how to do and why to do it that way thank you
This is a great instructional view and your comments are really helpful. I've been turning a couple of years and reminded me of the finer points! Thank you
Hi, Thanks that explains alot because I have not been turning very long. I also started with carbide chisels because I never knew how to sharpen any tools. I just bought the Wolverine System and will be getting that setup this week on my new grinding / sharpening machine. I did buy a small set of HSS chisels and will sharpen them, because I used them but I believe that were not very sharp when they arrived. Thank You Ron
Normally chisels are not very sharp when they arrive. I think you will like the wolverine, and is you are using an abrasive wheel make sure it is not coarse and it will not give as good of an edge and will eat up tools quickly. Thanks for watching Ron!
This was such a great tutorial and really well explained. Thank you! Just wondering what the difference between the grinders is? It seems like the Pro Edge is easier...?
The pro edge is easier to grind longer grinds on gouges as the wolverine attachment on these gouge grinds I find clunky. For single plane grinding like a traditional grind on a bowl gouge, a spindle roughing gouge or scrapers I just find the other grinder faster as I can leave them set up for each. I hope that makes sense? I appreciate you watching!
Thanks Lewis. I'm going to grind a short bevel on one of my bowl gouges for sure!! I'm always having trouble turning the corner then cutting the bottom. Good job! Cheers, Rick
I use the wolverine jig for sharpening and got tired of playing with it to get the arm in the right position every time I used it. Had a bunch of strips 1/2" square left over from another project. Set my jig to where I wanted it and cut a strip to just fit between the base and the v arm. Made 1 for each tool, now when I sharpen I just place it against the base slide the v arm up to contact it and it's set. No muss no fuss. If I get a new tool or decide to change the grind angle it's easy to make another.
Thanks so much for this video. I'm new to turning and this answered a tn of questions. Now I need to buy a couple if bowl gouges to go with what I have.
Congratulations 22K awesome Lewis! Thank you so much for explaining how you use gouges. I have learned a bunch! I vae a wolverine jig. I stink at sharpening. I usually just throw them over by the grinder and my husband sharpens them. Makes him feel important 😆😆😆
I love your videos, you explain everything in great detail, I have just started wood turning again now I’m retired and this is a good refresher coarse for me, back in the 80’s I did some off centre turning ie ( candle stick’s) have you ever tried doing off centre turning before, it may be of interest to your viewers.
Great demo and explanation Lewis, thanks. Still hate the spindle gouge, but am trying to force myself to learn and use it. Hopefully I can implement some of the pointers you gave about it. Wes @ Piedra Designs
It's a shame that you don't have a mike that you can clip to your collar. Because your voice drifted in and out of volume. Other than that it was very informative thank you
Excellent tutorial lewis! I found myself wondering at the end of the video if you've ever tried a secondary bevel on the heel of your gouge? Essentially shortens that gap distance in the tight corners but still allows you to ride that bevel on long sweeping curves and straight cuts
They are in a rack that is 16' long x 4' deep and 8' high. There are hundreds there. check out the shop tour video, it is the first one of 2022, you can see them better in that video.
Great video, I have been turning a few years, (on and off) but never seen any instructional video's like this , THANKS :)
Thank you for watching!
I have watched this video multiple times. It really helps to keep me focused on my basic efficiency goals that I have. I am trying to get more efficient at production. I follow so many turners on CZcams, but I relate to your technique the most. I really appreciate the variety of videos that you upload, Thanks again for sharing.
Hey Duane! I appreciate it! Thanks for watching!
I so enjoy this video.. I been turning for 55 years.. years ago we only had high speed steel. Then m2 steel was developed which is 5-8 times better.. in the last 6 years we see Carter and sons in Seattle develop m42 steel which is way beyond m2.. please don’t waste you money.. but m42.. this steel is as good as carbide and does well on resin or anything you like.. life is way more fun with M42.. I still use the English grind for more than the bottom of the bowl too.. I hope you all happy times.. enjoy.. ☺️👍
I have some M42 and the only drawback I have found is that it does not like birdseye. Ive had it chip more than once. Thanks for watching!
@@TheKlondikeCraftsman wow change the cutting angle to be steeper..
Thank you very much. I’m sure I’ll be referencing this again. Your time , technique and detail is greatly appreciated. I have a shop smith I keep just for lathe and band saw. I don’t like the lathe. I just acquired a 70s craftsman lathe in good shape and seems superior to Smith. Ive only turned a few things as needed knobs , top for lantern I made and such. What I’ve found though is when I’m turning I don’t want to stop lol. I really want to do more and excel at it. It draws me in like siren calling. Watching shapes appear is quit a feeling and very satisfying. Your small projects and direction should be a great start to a more serous path forward. The grinds are important so paying close attention. The safety tips are great to. You seem to love what you’d and share that with out holding back. That’s what I’m looking for as a novice. 👍
HI John! Woodturning is very addictive, I can relate. I appreciate you watching
thank you for pointing out that you want the whole surface of the bevel of the tool to be touching the wood's surface. i'm going to keep that in mind the next time i'm on my lathe. cheers!
Excellent Nathan, thanks so much for watching!
For years there was no Wolverine or rapture system.. In the 50’s and 60’s we were taught to use scrapers.. that just rips out end grain and requires sanding. Then a English man Peter Child introduces the grind like the roughing gouge and other bowl gouges.. Now we have the Wolverine system .. it is good and and more has been pushed for scrapers.. in a different way.. much like the scrapers with hook before sand paper.. The result is more control and less sanding if done right.. All these techniques are great to learn and knowing when to apply them is worth much.. be well all..
I appreciate you watching Terry!
Really enjoy the way you thoroughly explain everything. Can’t wait to try some of these techniques. I make pretty much every mistake you pointed out.
I hope it helps! Thanks for watching!
Notice his set up on rouging out gouge.. this is English grind.. I used this method for 35 years on a homemade jig.. it’s simple and easy.. When he used swept back grind this is known as the irish grind with the rapture system.. Both methods are great and I still use both.. you do not need the diamond like wheels to continue.. White wheels work just as well..
There are a lot of options! Thanks for watching.
Great video and explanations Lewis. Thanks for sharing.
Thanks so much Jiggsy!
I'd love to have one of those Sorby sharpeners. But, for the Oneway Wolverine setup, there are some pretty handy sharpening jigs called Raptor Set-Up Tools. I think you can buy them separately, but the set contains 35, 40, 45, 50, and 60 degree. They can be used to set the "stick-out" of that slider thing as well as for platforms. I am not sponsored by anyone. Just providing a little info. Cheers!
I’ve not seen those. I’ll take a look. Thanks for watching!
Until the pandemic, I was an IT guy and wood worker. I bought a HF lathe a month ago. I wouldn't be turning without your very helpful videos. I need to change my handle technique. Great stuff Lewis! Thanks 😊
That’s awesome James, I appreciate you watching!
brilliant very well explained .. thanks a mill .. From Terry in Ireland.
Thank you Terry! I really appreciate you watching!
Spindle ruffing gouge had a fantastic cut. It also requires knowledge of what you are doing. You are walking knowledge.
I appreciate that Ronnie, thanks
Lewis very well explained for all levels of turners , but with you actually doing the cuts as well is just fantastic to see, and it makes what you are explaining works
Thank you Alan,
I appreciate it!
That was very good, Lewis. Belongs on a subscription service for $10 per watch.
It was nice to have a lot of things affirmed and to learn a good number of things. As you alluded to a few techniques, I was waiting to hear Stewart Batty's name. When he emphasized the pressure on your tool be down on the toolrest, letting the wood come to the tool, was the day I stepped forward in my understanding. Or, rolled forward. I can't anchor a tool against myself from my seated position, but I often find a third point of contact for my right elbow on the workbench or lathe bed. Adapt and move on.
Great instructional!
Thanks Jay! There is always a way for sure! I have been floating the bevel for a long time but didn’t have a name for it until I saw the Batty video a few months ago. Hey I’d be cool with $10 per view but then the quality may have to go up. I appreciate you watching
Thank you thank you...I was one of the requesters ... thank you very much you helped a lot
Excellent Gordon! Thanks for watching!
Lewis,
That was a really fine explanation of proper tool grind and use, kinda reminded me of high school shop class back in the 90s. Thank you for taking time to film, edit and post this video
Thanks Donald, not sure it is proper but it works for me! I appreciate you watching!
Fantastic demonstration I am an old cabinet maker but new at turning and find it very helpful when someone takes the time to show me how to do and why to do it that way thank you
I appreciate you watching John!
Congratulations on the 22k subs Lewis
Thank you Brian!
What a great video lewis, so much information. Perfect for all levels of turners. Sharping tools is just as important as turning technique
Thanks Steve!
This is a great instructional view and your comments are really helpful. I've been turning a couple of years and reminded me of the finer points! Thank you
Thanks Rex! I really appreciate you watching!
Hi, Thanks that explains alot because I have not been turning very long. I also started with carbide chisels because I never knew how to sharpen any tools. I just bought the Wolverine System and will be getting that setup this week on my new grinding / sharpening machine. I did buy a small set of HSS chisels and will sharpen them, because I used them but I believe that were not very sharp when they arrived. Thank You Ron
Normally chisels are not very sharp when they arrive. I think you will like the wolverine, and is you are using an abrasive wheel make sure it is not coarse and it will not give as good of an edge and will eat up tools quickly. Thanks for watching Ron!
@@TheKlondikeCraftsman Yes I will use the very fine wheel that came on the Rikon Sharpener. Thank you
Thank you Lewis. Some excellent new tips and necessary reminders of some neglected practices that I need to reinstate.
I appreciate you watching, thanks!
This was such a great tutorial and really well explained. Thank you! Just wondering what the difference between the grinders is? It seems like the Pro Edge is easier...?
The pro edge is easier to grind longer grinds on gouges as the wolverine attachment on these gouge grinds I find clunky. For single plane grinding like a traditional grind on a bowl gouge, a spindle roughing gouge or scrapers I just find the other grinder faster as I can leave them set up for each. I hope that makes sense? I appreciate you watching!
Thanks for the awesome explanation and demonstration.
Thank you for watching!
I watched Allen Batty, (think name is correct) learned a lot about skews watching him.
There are a few good skew videos out there. I can sharpen them fine….using them is hit and miss!
Thanks Lewis. I'm going to grind a short bevel on one of my bowl gouges for sure!! I'm always having trouble turning the corner then cutting the bottom. Good job!
Cheers, Rick
Thanks Rick! I appreciate you watching buddy
Thanks for the thoughtful video. Like many, I learn better when I get a what, when, how, and why. You did a wonderful job of that in this video!
Thank you Nathan, I appreciate it
I use the wolverine jig for sharpening and got tired of playing with it to get the arm in the right position every time I used it. Had a bunch of strips 1/2" square left over from another project. Set my jig to where I wanted it and cut a strip to just fit between the base and the v arm. Made 1 for each tool, now when I sharpen I just place it against the base slide the v arm up to contact it and it's set. No muss no fuss. If I get a new tool or decide to change the grind angle it's easy to make another.
I never liked messing with it either. Great idea with the strips though! Thanks for watching Rick!
Thanks Rick for the idea, I was wondering of the easiest most repeatable way to set that bar length and yours is a true winner!
Great tips on turning and especially sharpening. Also glad to see somebody who draws as bad as I do!!! LOL
Thanks Dave! It is a good thing art comes in many forms !
Thanks for the great tutorial Lewis! It's always good to have a review on how to approach the inside hollowing
Thank you for watching Heather!
Great video Lewis.
Thanks for doing this.
Take care Lewis.
Cheers, Huw
Thanks so much Huw!
Thank you very much for the informative video. Your demonstration of "floating" the bevel was extremely helpful to a beginner like me
Thanks for watching Ward!
Excellent Lewis Enjoyed that Informative And educational
Thanks you Brian, I appreciate it!
Thank you so much for spending your time to educate us!
Thanks for watching Brian!
Thanks Lewis! Very helpful!
Thanks Steve!
Great explanations and examples.
Thanks so much Doug
Thanks so much for this video. I'm new to turning and this answered a tn of questions. Now I need to buy a couple if bowl gouges to go with what I have.
Thanks for watching Jimmy!
Thanks for the great video. I especially liked the explanation at the end. That will, hopefully, allow me to improve my bowl turning.
Thanks so much for watching Ron!
...very informative...thanks for taking the time to put this together...👍
Thank you for watching!
Nice video Lewis. Very informative video. Thank you for sharing 👍.
Thank you for watching Carl!
Great video, very explanatory and well worth watching, thanks
Thanks JK!
Thanks so much for your sharing knowledge. 🙏
Thank you for watching Vic!
Congratulations 22K awesome Lewis! Thank you so much for explaining how you use gouges. I have learned a bunch! I vae a wolverine jig. I stink at sharpening. I usually just throw them over by the grinder and my husband sharpens them. Makes him feel important 😆😆😆
Thank you Jane! It wouldn’t take long for you to be a pro! I personally sharpen way too often to rely on anyone. Thank you for watching!
Very nice video thank you for the tips really helpful
I appreciate you watching Kenny
Thanks always helpful.
Thanks! I appreciate you watching!
I love your videos, you explain everything in great detail, I have just started wood turning again now I’m retired and this is a good refresher coarse for me, back in the 80’s I did some off centre turning ie ( candle stick’s) have you ever tried doing off centre turning before, it may be of interest to your viewers.
I have done some but not much to be honest. I appreciate you watching Paul
Great demo and explanation Lewis, thanks. Still hate the spindle gouge, but am trying to force myself to learn and use it. Hopefully I can implement some of the pointers you gave about it.
Wes @ Piedra Designs
Thanks Wes. Keep at it and I am sure it will come quickly. Thanks for watching!
Great video
Thanks so much Paul!
Very informative video mate, great job
Thanks Gav, I appreciate it buddy
Good information and well presented.
Thank you for watching!
It's a shame that you don't have a mike that you can clip to your collar. Because your voice drifted in and out of volume. Other than that it was very informative thank you
Thanks Andrew, I appreciate you watching
Hi Mr ?
What is the angle on your bowl gouge the you do the bottom of the bowl with. I allways injoy your videos. Very informative.
David Wise 😁
Hey David, that gouge is 40 degrees. Thanks for watching!
Excellent tutorial lewis! I found myself wondering at the end of the video if you've ever tried a secondary bevel on the heel of your gouge? Essentially shortens that gap distance in the tight corners but still allows you to ride that bevel on long sweeping curves and straight cuts
Hey Chase, I don’t because I have the 40 degree. I never got into compound bevels but there is no reason not to. Thanks for watching!
@@TheKlondikeCraftsman now what about a dedicated bottom bowl gouge or again the 40° take care of that as well?
Yes the 40 does that well for the style of bowls I turn.
Can’t se the tool being sharpened on the second demonstration
Also could you zoom in on the tool when the cut is being made??? It’s hard to see what’s actually happening….
Thank you for the feedback, I appreciate it
very good tips thanks again thanks for your time . what do you think a tormek sharping system?
Thanks Larry. Ive not used a tormek but I have heard they are good. I appreciate you watching!
Thanks for sharing. What bevel angle do you use on your spindle gouge?
The jig is 45 degrees. Thanks Jon
How many bowl blanks do you have sitting on the floor behind your grinder.
They are in a rack that is 16' long x 4' deep and 8' high. There are hundreds there. check out the shop tour video, it is the first one of 2022, you can see them better in that video.
We’re you not concerned about what looked like a long crack in the wood?
It is 2 pieces glues together Ronnie. It was black exterior glue and that is why it looked like a crack. Thanks for watching!
Hİ 👋👍👌
Hi!