Stone Coated Metal Roof Install in South Florida
Vložit
- čas přidán 17. 10. 2023
- Check out this video where Tim and the team complete a stone coated steel metal re-roof project in Tequesta (Martin County), Florida.
Tim shows some of the details of a stone coated metal roof, how they differ from other types of metal roofs, including restoring a chimney, some gable ends, a couple of impact skylight and a custom stainless steel saddle detail.
Give us a call or send us an email at hello@perkinsroofing.net to schedule your free estimate for roof repairs, re-roof, gutters, sheet metal, liquid restorations, and more today!
For Miami-Dade, Broward, and Monroe counties call us at 📞 (305) MIA-ROOF
For Palm Beach, Martin, and St. Lucie counties call us at 📞 (561) 559-ROOF
GIVE THIS VIDEO A LIKE & SUBSCRIBE FOR MORE VIDEOS
#TeamPerkinsRoofing#MiamiRoofing#PalmBeachRoofing
__________________
Connect with us!
Website: perkinsroofing.net/
Facebook: / perkinsroofi. .
Instagram: / perkinsroof. .
__________________ - Jak na to + styl
I need it
Great video. The direct-to-deck method looks pretty walkable. Would you say if it's on a batten system, it's still somewhat walkable if you walk on the seams? Since it has more air gap. Have you done any with battened system? Thanks
Yes, we have done battened systems. They are less walkable, because if you don't hit the battens you can dent the panels. Unless you have a greater than 6/12 slope, I would generally avoid the battened systems, because the benefit is negligible against the increase in cost.
Do you recommend tearing off or going over asphalt shingles
Demo
Some guys say start from top looks like you started from bottom up stair step just like normal shingles they told me hard to keep strait from starting at bottom
We don't have issues, I would think installing from the top would be more difficult to keep straight with the eave line.
Interesting that your instructions are to " walk on the edges of the tiles after installation" which is the correct way to walk on a roof , however when you check near the end of the recording you can see several of your employees jusf barging all over the tiles instead of the advice you put forward?
Our employees are half mountain goat, they spend more time on roofs than on the ground.
Which stone coated steel do you recommend we are in wi tilcor
Edco decra
I usually use United Steel (Boral), but they are all the same quality-wise. The most important thing is to pay for a quality installer - stone coated roofs are easy to mess up.
Is this kind of roof call decramastic?
No, it's a stone coated metal tile. Though there is a brand called Decra that makes some of these.
Mr. Kanak, I have a barrel concrete tile roof. Was wondering if it is okay to clean it with a bleach solution applied with a backpack sprayer? Does bleach ruin underpayment? I have a modified bitumen underlay that is also used on most flat roofs. It’s thicker than the old standard 90 weight.
I recommend Wet and Forget... bleach is fine for the roof, but it will probably kill all your plants on the ground. I have a video on tile maintenance specifically if you are interested. Thanks for watching!
@@perkinsroofingcorp Thank you
How much is the cost me medium home??
Between $16 - $18 per SF, depending on cuts, details, etc.