The helmet and gloves are meant to create an experience as something of a highlighter for the viewer ( obviously 🙄 not all viewers). Thank you for the effort!!!
I didn't use the QR1 Lite at all so I don't know if the metal QR1 improves experience in comparison. I just don't like how QR1 Lite works and the fact that it might break.
Lite breaks and bends and the metal one doesn’t sit flush on CSL DD for a lot of people but if you just pop the safety screw in it fixes it. It exactly “quick” at that point but really solid!!
I find the QR1 flexes at the shaft due to poor tolerances on milling the aluminium and that the QR1 lite flexes because it's made of plastic. On balance I'd say the lite is the better system - It's cheaper and performs the same overall. What we really need is a metal version of the lite. That would be perfection!
TgtII is great on GT7 but the Logitech G pro takes the same technology [trueforce] and puts it in 11nm DD amazing ! You wont get feedback thru the pedals with the fanatec but G-GTII and G pro both have it .
I have the wheel stand 2.0 with a g920 hooked up and while the stand doesn't shake too much, the wheel is very loud. Was that the 5NM or 8NM, how sturdy was it with the DD and would you say the GT DD is silent or at least very quiet?
With 5Nm the GT DD Pro is pretty quiet, but not as quiet as I was hoping. The noise comes from the quick release when the FFB signal simulates vibration, the tape fix helps a lot but still not absolutely silent: www.reddit.com/r/Fanatec/comments/s31toa.
Just curious but does it handle well with your direct drive wheel with like no flex? Im also considering getting the gt seat add on since I already have the wheel stand like yours? but I’m also probably thinking if I should wait longer to get a much more higher end rig such as a playseat sensation pro (my ideal rig) in like 4-5 years at least. Just want to know your thoughts if this can handle well with a DD set up since I’ll also consider buying the higher end Logitech g pro set up🙏👍.
I switched to a much more rigid rig, F-GT Elite, after roughly 10 months of use. WS 2.0 and GT seat add-on are perfectly fine for the DD Pro at 8 Nm, but its weakness is the pedal plate of WS 2.0, it has too much flex with a load cell brake.
hi nathaniel, i bought the gt dd pro now. And i got the same next level gttrack. My problem is i dont have the screws to fix it. u used m6 screws but which length? 20mm or 25mm? cuz I have tried with 20 mm m6 screws and somehow its not really stable as i want it to. It does move a bit. I appreciate your help
The wheel base won’t be a problem, at least for < 10Nm ones. The real difference is the pedal plate, WS DD or GTtrack have strengthening bolts to better support the plate, I’m not sure how effective they are, but pedal plate flexing is definitely an issue on WS2.0 with a load cell brake.
I’ve had my G923 for two days and am very impressed and want to take it further so would you recommend this wheel? How’s the durability as well. I play GT7
@@Nathaniel_Wu Would you mind listing the parts you purchased? I've got the Wheel Stand Pro and GT DD all unpacked and just realised I have no bolts to mount the pedals :(
Is ut sturdy enough for the wheelbase? Sold my playseat challenge and looking to buy something that would work well and can take the gt dd pro 8nm’s ffb
Hello. congratulations for the video. I wanted to ask you for information. the steering wheel is beautiful, but how is the force feedback? thanks and have fun.
I'm not an expert on FFB since I've only used G27 and G29 before and my real-life racing experience is solely from rental karts. There are plenty of great reviews out there that talk about FFB. But I think it's pretty good, I'm able to drive way more consistently in online races now compared to my days with G29.
It’s the WS 2.0. If you don’t need to fold it away very often, and has a plan to upgrade with the seat add-on, WS DD is better. WS DD’s pedal tray has a strengthening bolt to reduce flex, whereas on WS 2.0 I have to stuff a furniture raiser under the pedal tray with a load cell brake pedal. czcams.com/video/32VZM3CA_4k/video.html
Nice! 2 problems (IMO, obviously)I will avoid when I get mine: 1- Your pedals are apart! Do you use left foot for braking?? That´s bizarre! It´s not go kart, we are driving full vehicles and we should normally use right foot for both. I´d place them next to each other, mid and right positions. 2- Wheel is in front of TV screen. I don´t like it, I want to see full screen. Anyway, that´s due to your TV set height. Congrats!!!
1. I just didn't bother to adjust the gap back when I was filming. I received my load cell pedal later and have adjusted the gaps. That being said, in real-world race cars most professional drivers do left-foot braking. 2. Yeah, that's as low as my rig would allow while my arms are still in a good position. I adjusted the pitch of the base and from where I seat there's only a tiny bit of screen getting blocked.
@@Nathaniel_Wu muscle memory takes months to get used, and it’s used by the ones that came from uears of go kart only, it’s really hard to apply correct force when you were used to MANUAL gear… people usually will break too hard, and as a racer he just cannot spend months trying to re-learn what he already mastered… also, heel-toe is easier to adapt to. If you’ve never got used to manual gear, than it should be much easier to get used to left foot breaking. I’ve tried a couple times and it’s impossible after driving 20+ years in manual gear.
So for screws, if you're using the next level mounting solution, it's 4 M6-13's for the base, and 2 M6-25's for the pedals? I'm building the same setup. Just need to know which M6's to get at Home Depot.
Hey Ryan, did everything work out? I am getting the same setup. Did the pedals mount fine with 2 screws or did you need 4? The fanatec manual says you also have to use 2 screws for the pedal deck and also 2 for the pedals themselves as they also have 8mm holes. I saw in this video that only the pedal deck was screwed in, but I saw another one that also had the pedals screwed in to their rig.
Using two is fine. For the other two holes you can probably use some bolts and nuts, but it's purely optional. I can't even access those on my pedal tray, they are blocked.
It was Next Level Racing Wheel Stand 2.0 + GT seat add-on, it was pretty much equivalent to their GTTrack. Can't say I recommend it now though, get an aluminum profile rig instead.
Hi Sir , I just ordered the gt dd pro bundle with next level racing gt track , is the seat good and comfortably compatible with the DD base ? Is there any problem of compatibility in general with the stand ? Are the pedals solid and not moving ? Thank you
What I have is the Wheel Stand 2.0 + GT seat add-on, but I believe the GTTrack is essentially the same in terms of mounting, it should be perfectly compatible with GT DD Pro. I later upgraded to the CSL Load Cell brake pedal and the rig is very solid, the only bit of movement is from the back of the seat because it's adjustable, but it's barely noticeable when I'm driving.
@@Nathaniel_Wu thank you , because I ordered the 8nm boost kit so I was a bit worried in this sense so for you I did a good purchase should I stop breaking my head ?
Mine is Wheel Stand 2.0 + GT Seat add-on, ergonomically speaking it's the same as GT Track. And yes, I get back pain from the seat as well, I bought a lumbar support pillow and a neck support pillow on Amazon to solve the problem.
Hi, I have the same setup as you - the GT Seat and I'm having problem mounting my pedals, I see you used some kind of grey screws that look custom, do you mind telling me what they are called and the dimensions. Thank you!
Hi, I really your video. I've noticed you replaced the default driving wheel rotating sleeve with quick release? Any reason why and what's the quick release part name and number if possible.
It's just Fanatec's standard QR1. I did it because don't like the way the default QR1 Lite works, and it might break and destroy the pins. In the end I don't like the GT wheel at all and I haven't been using it since I received my other wheels.
@@Nathaniel_Wu Would it be a hassle to try and measure it? I'd like to get the wheel stand 2.0 with the GT DD Pro but I'm not sure how big is it to store.
@@qudek77 sorry but I don’t want to do that, because I would have to uninstall the seat to fold the front half. You can probably find dimensions in the manual, which is downloadable on their website.
Hi @@Nathaniel_Wu , nice setup! I’m French and my English writing isn’t perfect! Looking forward to my orders of GT DD Pro Premium Bundle and NLR Wheel Stand 2.0! Thanks to your video now I can easily imagine my future setup!!! I have a question about the screws, do you recommend that I buy some in advance? nothing is included? here in our case the "X" is 3mm for the pedal set and the wheel base ? Thank you and have a good run!
Thanks for your concern but the like ratio is high enough that I’m not worried. Besides, I’m not really trying to grow this channel into something profitable.
You probably got the impression from my GoPro cam, but that’s shot with a super wide view. This is a 65-inch tv, I get an FOV of about 60°, not bad at all for a single screen.
For how much this wheel costs the pedals are a joke, hell the thrustmaster t150s plastic pedals are the same quality for 200 bucks, t150 pro has better pedals, 3 aluminum pedals for how much cheaper?
To be fair, the CSL pedals that comes with the bundle costs only $80. If you buy the premium bundle, which has the load cell kit preinstalled, the pedal set still only costs $200.
I usually drive in hood view. I wouldn't use the cockpit view unless I had a tripple monitor setup (which GT doesn't support anyway). Cockpit view in GT really limits the peripheral vision, which is not good for online racing.
helmet for safety of course.
haha
Gotta stay safe from the bluelightvirus
And the gloves for the unboxing. Don’t want to get a paper cut
Wu told him best protect ya neck. lol
@@Darksagan😂😂SUUUUUUUUU!!!! 🙌
I love that you can hear the heavy breathing 😂 I think there's something great about a grown-a$$ dude getting so excited. I'd be that excited too!
love seeing men with hobbies and passions, always important to have those things.
@@Squidwardsclarinet69 100% my dude!
Racing inside with a helmet on is beyond me & props for doing all that with gloves on haha
The helmet and gloves are meant to create an experience as something of a highlighter for the viewer ( obviously 🙄 not all viewers). Thank you for the effort!!!
Gosh I’m jealous
Fanatec need to ship this worldwide ASAP
My man unboxed it with an hemet on too! Legend
What T nuts did you use? I have the same nlr f gt and I need to hard mount it but I need some t nuts
I just used the ones that came with the wheel base.
Nice rig. I'm still using Wheel Stand DD with an office chair. Was the GT Seat worth it?
a bit expensive for what it is, but yeah
Great driving and set up. Looking to get something for our Xbox one series s.
Great video! Does the QR1 Quick Release improve the driving experience, or it's just faster to use when changing wheels?
I didn't use the QR1 Lite at all so I don't know if the metal QR1 improves experience in comparison. I just don't like how QR1 Lite works and the fact that it might break.
Quick Lite bends when force is applied
Lite breaks and bends and the metal one doesn’t sit flush on CSL DD for a lot of people but if you just pop the safety screw in it fixes it. It exactly “quick” at that point but really solid!!
I find the QR1 flexes at the shaft due to poor tolerances on milling the aluminium and that the QR1 lite flexes because it's made of plastic. On balance I'd say the lite is the better system - It's cheaper and performs the same overall.
What we really need is a metal version of the lite. That would be perfection!
a fun video! I enjoyed it! putting links in the description would be a good idea for future videos ^_^
我想請問Fanatec DD Pro (8nm)配上Next Level Racing Wheel Stand 2.0 (無後半段賽車椅) 不知是否會撐不住直驅 架子跟著震動呢?
没试过,但看其他评测视频有用过15Nm直驱的,应该没什么问题。
Always remember to update before use
Thanks for the reminder, I did it off camera
🤔May I ask what screws did you use to mount your direct drive?? I'm new to the Sim racing and I don't know
4 M6 x (10+X)mm bolts for the base, and 2 M6 x (22+X)mm bolts for the pedal set, X mm is the thickness of your mounting plate.
@@Nathaniel_Wu 😎 ok thanks
The bolts you mounted into the spacer, are the 25mm M6? What size are the ones for the top of the pedal?
I don't remember. You should be able to find the info in the manual, it's available on Fanatec website.
I like this guy
Nice video. Good setup. I am waiting for see how Thrustmaster TGT2 features work with GT7 before jumping into the Fanatec wagon.
TgtII is great on GT7 but the Logitech G pro takes the same technology [trueforce] and puts it in 11nm DD amazing ! You wont get feedback thru the pedals with the fanatec but G-GTII and G pro both have it .
nice man! just waiting on mine " Shipping Label Created, USPS Awaiting Item"
I have the wheel stand 2.0 with a g920 hooked up and while the stand doesn't shake too much, the wheel is very loud. Was that the 5NM or 8NM, how sturdy was it with the DD and would you say the GT DD is silent or at least very quiet?
With 5Nm the GT DD Pro is pretty quiet, but not as quiet as I was hoping. The noise comes from the quick release when the FFB signal simulates vibration, the tape fix helps a lot but still not absolutely silent: www.reddit.com/r/Fanatec/comments/s31toa.
Just curious but does it handle well with your direct drive wheel with like no flex? Im also considering getting the gt seat add on since I already have the wheel stand like yours? but I’m also probably thinking if I should wait longer to get a much more higher end rig such as a playseat sensation pro (my ideal rig) in like 4-5 years at least. Just want to know your thoughts if this can handle well with a DD set up since I’ll also consider buying the higher end Logitech g pro set up🙏👍.
I switched to a much more rigid rig, F-GT Elite, after roughly 10 months of use. WS 2.0 and GT seat add-on are perfectly fine for the DD Pro at 8 Nm, but its weakness is the pedal plate of WS 2.0, it has too much flex with a load cell brake.
As Kimi said, steering wheel and gloves. :)
Enjoy!
nice. Dig the cockpit. Wish I had one like it.
hi nathaniel, i bought the gt dd pro now. And i got the same next level gttrack.
My problem is i dont have the screws to fix it.
u used m6 screws but which length? 20mm or 25mm? cuz I have tried with 20 mm m6 screws and somehow its not really stable as i want it to. It does move a bit. I appreciate your help
4 M6 x 12mm or 13mm for the base, and 2 M6 x 25mm for the pedal set
Would love to know how the NLR 2.0 stand pairs with the seat addon anything compromised over the DD wheel stand once bolted together?
The wheel base won’t be a problem, at least for < 10Nm ones. The real difference is the pedal plate, WS DD or GTtrack have strengthening bolts to better support the plate, I’m not sure how effective they are, but pedal plate flexing is definitely an issue on WS2.0 with a load cell brake.
I’ve had my G923 for two days and am very impressed and want to take it further so would you recommend this wheel? How’s the durability as well. I play GT7
I had been using G29 before GT DD Pro, it's a significant step up for sure.
Almost the same setup I will be using🙌🏽💪🏽. Are the caster wheels solid when standing still?.
Yes, they seem very solid so far
@@Nathaniel_Wu Thanks for the info, appreciate it.
Great video! Did the mounting screws come with the fanatec? Or from the stand?
Neither, you have to buy them yourself.
@@Nathaniel_Wu Would you mind listing the parts you purchased? I've got the Wheel Stand Pro and GT DD all unpacked and just realised I have no bolts to mount the pedals :(
@@CaptainRizla 4 M6 x 12mm or 13mm for the base, and 2 M6 x 25mm for the pedal set
@@Nathaniel_Wu Thank you!
Is this classified ASMR because I think I might be into Sim ASMRacing.
Is ut sturdy enough for the wheelbase? Sold my playseat challenge and looking to buy something that would work well and can take the gt dd pro 8nm’s ffb
Yes, it is
Hello. congratulations for the video. I wanted to ask you for information. the steering wheel is beautiful, but how is the force feedback? thanks and have fun.
I'm not an expert on FFB since I've only used G27 and G29 before and my real-life racing experience is solely from rental karts. There are plenty of great reviews out there that talk about FFB. But I think it's pretty good, I'm able to drive way more consistently in online races now compared to my days with G29.
Is that the wheelstand DD..I'm looking at either the wheelstand 2.0 or DD ..I have the same wheelbase and was wondering which stand would be better
It’s the WS 2.0. If you don’t need to fold it away very often, and has a plan to upgrade with the seat add-on, WS DD is better. WS DD’s pedal tray has a strengthening bolt to reduce flex, whereas on WS 2.0 I have to stuff a furniture raiser under the pedal tray with a load cell brake pedal. czcams.com/video/32VZM3CA_4k/video.html
Nice!
2 problems (IMO, obviously)I will avoid when I get mine:
1- Your pedals are apart! Do you use left foot for braking?? That´s bizarre! It´s not go kart, we are driving full vehicles and we should normally use right foot for both. I´d place them next to each other, mid and right positions.
2- Wheel is in front of TV screen. I don´t like it, I want to see full screen. Anyway, that´s due to your TV set height.
Congrats!!!
1. I just didn't bother to adjust the gap back when I was filming. I received my load cell pedal later and have adjusted the gaps. That being said, in real-world race cars most professional drivers do left-foot braking.
2. Yeah, that's as low as my rig would allow while my arms are still in a good position. I adjusted the pitch of the base and from where I seat there's only a tiny bit of screen getting blocked.
@@Nathaniel_Wu muscle memory takes months to get used, and it’s used by the ones that came from uears of go kart only, it’s really hard to apply correct force when you were used to MANUAL gear… people usually will break too hard, and as a racer he just cannot spend months trying to re-learn what he already mastered… also, heel-toe is easier to adapt to.
If you’ve never got used to manual gear, than it should be much easier to get used to left foot breaking. I’ve tried a couple times and it’s impossible after driving 20+ years in manual gear.
@@smanzoli I’ve driven a manual car every day for the last 18 years and had no problem getting used to left foot braking on the sim rig.
what seat is that because @ 4:50 it looks different from the NLR gt seat addon
It is, I just had a lumbar support pillow on it.
@@Nathaniel_Wu oh okay thanks
What stand are you using I’m upgrading to fanatec and don’t want to pay an arm and a leg for a stand 😂
I was using the Next Level Racing Wheel Stand 2.0 + GT seat add-on when I shot the video, switched to NLR F-GT Elite nowadays.
I am looking to build my stand out of pvc to have multiple uses. What Seat are you using?
I'm not using an aftermarket seat.
Which is the playseat?
Hi, please tell me what bolts are attached to the CSL pedals and what bolts are attached to the DD Pro wheel base
It depends on your rig, please refer to Fanatec manuals.
@@Nathaniel_Wu OK, it's just that I don't have a fanatec wheelbase yet, and I was wondering what bolts are attached to it
You can find manual pdf on their website
@@Nathaniel_Wu Thanks, I'll know now
Comment tu peus bosser avec des gants ? Sinon super le volant
No flexing with wheel stand 2.0? Trying to decide between that and the dd wheel stand
The only flex is the pedal tray if you upgrade to a load cell brake, I had to do this: czcams.com/video/32VZM3CA_4k/video.html
Thank you!
So for screws, if you're using the next level mounting solution, it's 4 M6-13's for the base, and 2 M6-25's for the pedals? I'm building the same setup. Just need to know which M6's to get at Home Depot.
Yes. I didn't find M6 x 13mm and used M6 x 12mm instead.
@@Nathaniel_Wu you rock. thanks for saving me a ton of trial and error!
Hey Ryan, did everything work out? I am getting the same setup. Did the pedals mount fine with 2 screws or did you need 4? The fanatec manual says you also have to use 2 screws for the pedal deck and also 2 for the pedals themselves as they also have 8mm holes. I saw in this video that only the pedal deck was screwed in, but I saw another one that also had the pedals screwed in to their rig.
Using two is fine. For the other two holes you can probably use some bolts and nuts, but it's purely optional. I can't even access those on my pedal tray, they are blocked.
Nice video thank you.
when fanatec has a restock?
I have no affiliation with them. Maybe you could ask them on twitter or something.
Does the Next Level Racing rig actually came with roller wheels or was it custom?
I bought them seperately from NLR, but if you buy the GTTrack rig, it comes with caster wheels.
Would love to see some gt7 videos from you.
Cool helmet ⛑
Hey! What is the name of that cockpit? It looks great!
It was Next Level Racing Wheel Stand 2.0 + GT seat add-on, it was pretty much equivalent to their GTTrack. Can't say I recommend it now though, get an aluminum profile rig instead.
Thanks mate!@@Nathaniel_Wu
Was that a torque wrench used for the qr swap? If were did you buy it? Drive safely, Thank You!
Yes, it was, I bought one on Amazon.
Wheel stand 2.0 does not come with caster wheels , i see you got some on , might sharing which ones you bought ?
I bought the NLR ones.
Hi Sir , I just ordered the gt dd pro bundle with next level racing gt track , is the seat good and comfortably compatible with the DD base ? Is there any problem of compatibility in general with the stand ? Are the pedals solid and not moving ? Thank you
What I have is the Wheel Stand 2.0 + GT seat add-on, but I believe the GTTrack is essentially the same in terms of mounting, it should be perfectly compatible with GT DD Pro. I later upgraded to the CSL Load Cell brake pedal and the rig is very solid, the only bit of movement is from the back of the seat because it's adjustable, but it's barely noticeable when I'm driving.
@@Nathaniel_Wu thank you , because I ordered the 8nm boost kit so I was a bit worried in this sense so for you I did a good purchase should I stop breaking my head ?
@@hamzamouchtaki3690 I upgraded to 8Nm as well, no movement in the front half the rig whatsoever
what type of camera you have on your head?
just a gopro
Do you got the nextlevel gt track rig? I got the same rig but i got back pain with the seat
Mine is Wheel Stand 2.0 + GT Seat add-on, ergonomically speaking it's the same as GT Track. And yes, I get back pain from the seat as well, I bought a lumbar support pillow and a neck support pillow on Amazon to solve the problem.
How did you end up with it so early does the available date just a estimate?
express version
The unboxing was good, but I wanna know "What track is this"?
Dragon Trail- Seaside
Best video
Hello, how long do you have the next level gt track ? I notice that my seat already ripped. How is your seat ?
Mine is the GT seat add-on. I've spent maybe 120 hrs, it's still alright.
@@Nathaniel_Wu is the GT seat add-on different from the seat from the gt track ?
@@kimtraina yeah, the add-on seat is fabric, not leather, and it doesn’t have the seat belts
@@Nathaniel_Wu thank you! :) but mine is fabric too
OK, I only saw the product website and thought it was all leather, good to know, now mine only lacks the seat belts :)
i like it
thank you
Did u brought the super boost kit if so is it worth it ??
I bought it but it's not shipped yet, so I don't know yet. But so far I'm pretty sure the standard power brick is a little weak for my liking.
Hi, I have the same setup as you - the GT Seat and I'm having problem mounting my pedals, I see you used some kind of grey screws that look custom, do you mind telling me what they are called and the dimensions. Thank you!
4 M6 x (10+X)mm bolts for the base, and 2 M6 x (22+X)mm bolts for the pedal set, X mm is the thickness of your mounting plate.
Hi, I really your video. I've noticed you replaced the default driving wheel rotating sleeve with quick release? Any reason why and what's the quick release part name and number if possible.
It's just Fanatec's standard QR1. I did it because don't like the way the default QR1 Lite works, and it might break and destroy the pins. In the end I don't like the GT wheel at all and I haven't been using it since I received my other wheels.
@@Nathaniel_Wu Cool thanks. Which other wheels did you go for?
@@tiagy3821 Formula V2.5 and ClubSport Porsche GT3. I have another unboxing video of those.
Do you have to tighten the shaft?
No, you don’t have to. I was just checking if if it’s at the specified 15 Nm torque.
How many Olivia Newton meters is dat?
In the video I was using the standard 5Nm power supply.
Can you get different wheels for this?
Yes. All Fanatec wheels should work on it.
you can gold that one with a controller. still jealous...
It was like my first hour on the new setup. I golded it later.
B站推荐完来油管又推荐了哈哈哈
What are the dimensions of the rig when folded?
I have no idea, I never folded it.
@@Nathaniel_Wu Would it be a hassle to try and measure it? I'd like to get the wheel stand 2.0 with the GT DD Pro but I'm not sure how big is it to store.
@@qudek77 sorry but I don’t want to do that, because I would have to uninstall the seat to fold the front half. You can probably find dimensions in the manual, which is downloadable on their website.
@@Nathaniel_Wu Thanks 😊
are the pedals light?, and not immersive?
The brake pedal isn’t very good
@@Nathaniel_Wu Thanks, it means there is a need to buy the load cell kit for the brake pedal,
Can you give the link for the rig
Just search for Next Level Racing
👍👍👍👍👍👍👍👍👍👍👍
Did you unbox it and mount it all with the helmet on?
of course not
What kind of screws do I need to mount the base?
4 M6 x (10+X)mm bolts for the base, and 2 M6 x (22+X)mm bolts for the pedal set, X mm is the thickness of your mounting plate.
@@Nathaniel_Wu thanks a lot
Hi @@Nathaniel_Wu , nice setup!
I’m French and my English writing isn’t perfect!
Looking forward to my orders of GT DD Pro Premium Bundle and NLR Wheel Stand 2.0! Thanks to your video now I can easily imagine my future setup!!!
I have a question about the screws, do you recommend that I buy some in advance? nothing is included? here in our case the "X" is 3mm for the pedal set and the wheel base ?
Thank you and have a good run!
Yep, no bolts included. I got M6 x 12mm and M6 x 25mm bolts, they are working fine so far.
@@Nathaniel_Wu thanks a lot!
Im already sending half an hour to adjust the screws to let my csl dd fit fuck me
这个支架是什么牌子的?
Next Level Racing
Jajajaja pon un pitlook para que no se te enpaňe la visera
Helmet?? you don't have GF do you😥😝
You forgot safety belt, wtf man
請問用起來有什麼問題嗎
如果是指故障的话没有遇到,但是有主要的设计缺陷是快拆连接在高扭矩时容易发出声响,需要贴胶布或者用锁定螺栓。
大大,求分享您代購的管道~~
我不是通过代购的。
台湾不清楚有什么美国的转运,但我用的jpgoodbuy里面可以从日本寄往台湾
好用嗎?~^^
还不错,比我之前用的G29强多了。
Why make a youtube channel if you're literally aren't gonna say a word? I can only imagine the dislikes
Thanks for your concern but the like ratio is high enough that I’m not worried. Besides, I’m not really trying to grow this channel into something profitable.
tv to low to small😅
You probably got the impression from my GoPro cam, but that’s shot with a super wide view. This is a 65-inch tv, I get an FOV of about 60°, not bad at all for a single screen.
So many plastic bags, why? For a simple wrench? Come on, you can do better fanatec!
For how much this wheel costs the pedals are a joke, hell the thrustmaster t150s plastic pedals are the same quality for 200 bucks, t150 pro has better pedals, 3 aluminum pedals for how much cheaper?
To be fair, the CSL pedals that comes with the bundle costs only $80. If you buy the premium bundle, which has the load cell kit preinstalled, the pedal set still only costs $200.
You need to drive “in car” view
I usually drive in hood view. I wouldn't use the cockpit view unless I had a tripple monitor setup (which GT doesn't support anyway). Cockpit view in GT really limits the peripheral vision, which is not good for online racing.
You have bought a base that has a USB connection from the flywheel to the motor hahahahahaha it will break in months
I have the cable fixed onto the rig, the port is not breaking any time soon.
Turn off that dam traction control then maybe we all could see how good it really is..thanks.
Too bad this setup only work if u live alone or gaming an cave lol
lol driving with a helmet in an arcade game :D:DD
I wore helmet mostly because I didn't want to show my face
Arcade game…, sure kid. Don’t be a hater just because you can’t afford none of that.
suggesting that if he was playing iracing or ACC the helmut would be needed?
For what u need gloves and helmet in fucking home?
Immersion!
Heyyy ive fallen out of my racing chair at home because i was wasted 🍺 so the helmet helps ya know?
everything was okay till the helmet!! nosense
I'm not ready to show my face, that's why. I don't ware it off camera.