Installing Custom Flooring on my Pontoon Boat Rebuild - Episode 4
Vložit
- čas přidán 29. 08. 2024
- Had to try the custom Flooring route again.... This time is was very successful!
I think it turned out pretty awesome! Tell me what you think.
Instagram!
Ultimate_Rebuilds
www.instagram....
Buy all your pontoon supplies at..
Pontoonstuff.com
Eastwood contour sct
www.eastwood.c...
Video Music:
Song: Atch - Traveller
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • Atch - Traveller (Vlog...
Song: InRp - Last Summer
Music provided by Vlog No Copyright Music.
Video Link: • InRp - Last Summer (Vl...
------------------------------
Sorrow by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_sorrow
Music promoted by Audio Library • Sorrow - Sappheiros (N...
------------------------------
------------------------------
Coming Home - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3yQGawP
Music promoted by Audio Library • Coming Home - Atch (No...
------------------------------
Song: Sappheiros - Memories
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Sappheiros - Memories ...
I'm envious of your determination, imagination and skills
I think you hinted at a good name for the boat. Mellow in the front and party in the back…The Mullet. It also helps that it is a Florida fish.
I really like the "house" concept...living room/kitchen... unique in regards to a pontoon boat (to me anyway)
I was going to commend you on getting all this done as a one man crew, but I see you have a lot of help from man's best friend. (little white dog) Love what your doing and how you do it.
The last one turned out great, I can't wait to see how this one ends up!
I’ve really been loving the new pontoon series man! From what I saw in your build plan video it’s gonna be sick!! Keep up the great work!
This guy is relentless! Rain, sun, heat, you do it in all conditions! Love the aluminium strip, sets it off, looks great!
This kids work ethic is on point!
I really enjoy your content. You are a very hard working, thoughtful, enterprising young man. You're restoring my faith in the younger generation. Good job!
I didn’t see you do it, but I would recommend sealing that storage hatch to the floor with more then just screws. Water will seep under and slowly rot the floor in that area. I have used 3m 5200 you can get it at Home Depot.
I like the floor a lot. The angle cut especially. Looking forward to the rest of build!
Love the flooring!! Love the feel of “two rooms” can’t wait to see this build progress!
The two tone carpeting is just *kiss*.
Always a bright spot in the day seeing and @ultimaterebuilds video pop up! The time lapse in the sunset fastening the cross member is epic!
My man!
I was literally sitting here thinking "That would be a perfect job for a Contour SCT" and BAM!!...there you are unboxing it.
Looks great! Can't wait to see the finished build.
Really nice so far. All the work I’ve seen looks professional. Love to see the final product.
You keep doing you bro! Your builds are fun to watch and I look forward to watching your future! Keep kicking ass!
Dude. I’m so proud of the work you do and the respect you give people’s opinions. Do what you gotta do but thanks for being community oriented in listening and dialoging with the viewer. Keep up the great content.
Looking great! Can't wait to see how you built out the rest of it.
Zack love it ! Maybe adding a chain to the floor hatch to stop it ‘springing’ the hinges or some sort of bump stop for the future
You should look into media blasting to clean up the aluminum corrosion. They have attachments for pressure washers that introduce a media to the water stream. Plus the water will help prevent the oxidized aluminum dust from becoming airborne. Looking forward to the finished product. Keep up the good work!
Wow Zach, I'm loving it!!! You are the man!
Excellent job on the deck. Imitation teak gives the boat a nautical and expensive vibe.
I’m inspired brother! I want to build a pontoon and start a striper charter. I want to take vets out and continue to honor their service. Well done my man!
I really appreciate your attention to detail... no cutting corner, pun intended. Keep it up!!!
It’s going to turn out awesome! Can’t wait to see the next video update.
Dropping a comment just to make sure to support the work you put in your projects
Loving the pontoon builds! I plan on buying an old pontoon and making it a mini house boat. BTW the bug has turned out awesome. Love the bajaish offroad style.
Great idea on the flooring. You make it seem easy to complete a full rebuild. Excited to see the finished product
Zach: again, your creativity amazes me. great job. Doesn't matter that one has padding and other doesn't...think moving from bed/living room to kitchen....although, now wondering if the padding helps distribute heat...hmm
Me: thinking an aluminum threshold would look cool.
Zach: Adds aluminum threshold.
Awesome! Next time, maybe consider running the teak look flooring across the boat to make it seem wider.
Derksen makes a "delux barn", with a really interesting "wrap around" front room. The room sticks out in front of the rest of the cabin, with windows front, left at a 45 degree angle, left at the 90 degree, and right at the 90 degree.
I can see one of those, with the front porch extended 2-4 feet. that front room being turned into a "bridge" giving the pilot a huge field of view. the rest of the cabin being set up as a simple houseboat, with the back of the cabin having the double doors option. Then mounting the entire thing on a 3 pontoon, or a metal barge set up. the double doors opening to an aft exterior deck, with the front door opening to the front deck for anchor or docking.
It just seems like it would make a fun "houseboat"/floating powered cabin.
Nice work on the "Toon", cannot wait for the next chapter🤠
What a hard working kid you are your parents must be soo proud of you 👍 👏👏👏👏👏👏👍👍👍👍👏👏👏
Love the info. I am going to tackle a project very similar this winter. I am impressed with your progress without any assistance. You have built my confidence to take this on myself. Thank you
Wow! All that while wearing crocks! You give me hope of building my own retirement house boat!
Rain or shine, this kid puts in work!
Lookin' good! I'd be tempted to throw a little cabin up front and move in!
No one could say your not a hard worker great job.
Wasn't sure about the flooring when you were explaining it but i definitely like it
In the previous video you mentioned that you were wanting ideas for what to do with some extra space in the back of the pontoon and an idea i had was what if you added a place for one of your jetski, and then you could build something to lower it off the back (like how ships have for life boats). Would mean you could take both to the lake with only the 1 trailer.
Learning a ton watching your videos (in case I ever do get a 'toon) , and I absolutely love how it's looking so far! This is an amazingly beautiful build in my opinion.
What a marvellous video . I need a pontoon fence. The one you are selling looks great.
What a fantastic improvement from your last build...learn what works and use it on future builds... nice!!.. flooring looks great, too!!..
could not tell but the fuel tank needs "padding" under it to prevent a hole from vibration over time. Looks good and great work ethic young man.
You should invest in a decent sandblasting rig. There are tons of options as far as media that would give you a nice enough profile that you could paint or just leave the toons with a blasted finish. Clean and consistent. Stay away from Silica sand unless you have the appropriate supplied air respirator for it.
Wow best boat build by far on the channel. Your doing an amazing job and like the two zones on the boat. Keep up the great work. Looking forward to see the finished product.
I think your doing an excellent job on the pontoon boat you have some great ideas and keep improving I know you have said in the past that the negative comments get to you but try to ignore them not everyone will like everything you do but that is up to them what matters is the majority of the comments are good and most importantly that you like how the things you do look keep up the good work loving watching over here in the UK
Some good dedication working in the rain! Looks good!
the last one turned out great , I can't wait see how this one end up .... lol
Floor worked great hope it holds up love the idea
Really like the concept! Can’t wait to see how the upper deck goes together!
another great video. I really like the vinyl but the cost was more than i was expecting. still turned out great and I am sure the finished product will be cheaper than buying a new boat. Looking forward to the rest of this series.
Yes broo. Killed it with the flooring. Looks like a 2021
Nice job, looks great. Enjoy the video's and the information
I think you are going to have some 'issues' with the location of the axles once you hang a motor on that 3rd log.
Good catch. Motor, Bar, Helm, Fuel all aft. Hard to tell for sure but that may add up to a negative tongue weight.
In reality, he should relocate the axles and replace the leaf springs and also change out the hubs to allow for 5-4.5 bolt pattern. The set up is gonna need some load range C trailer tires at a minimum
I agree on both comments. If possible it would be a good idea to get an axle weight on the single axle and tounge weight. Then he could see how much to move the axle or if there is need for a second. I had a 24' and it had a single but power size would make a difference, also.
You learned a lot from the first build didn't you, fantastic so far, like the first one can't wait to see where it ends up, I know it'll be unique and fantastic, waiting to see the concept of the folding upper deck, great work keep it up.
Great video series with this pontoon boat! Gonna be a definite party rig! Thank you for the excellent work on videos and the boat itself!
I like it better than I thought I would, nice job Zach!
Loving this project! Excited to see it finished!
OMG that looks nice I have to admit I was like no way is he doing another pontoon but now I'm super excited to see where this goes!
Your videos inspire me to build something
If you get an aluminum polish compound and a rotary polisher you might be able to get those aluminum pontoons shined up really nice - would look better than paint I think!
binge watched this series! excited for the next episode.
I'm loving this build for sure! Pretty jealous that you're already on pontoon #2
Dude I have a Comment lol I love every thing you do for a young man you really have an Amazing eye for Design & colors is out of this world in every single project you do 👍🏻 & your very Talented keep up with the great builts & videos man wow your Amazing 👍🏻
Very nice brother, think outside the box. CONGRATS
Fine job young man.
I think your doing awesome and looks awesome.cant wait to see it all done.
love the flooring. just an idea, glue some vinyl on the storage box.
Have you thought about a upper deck? Now that you have the third pontoon it would support the weight
I really do like how creative your getting with this
Love the back deck look
This is looking awesome. This would be fun anywhere!
I know it is a pain,but if you want to stop water intrusion you should use marine silicon when screwing in the marine plywood in the beginning.
As always, Good Stuff. Can't wait to see more!
Awesome that's what I think and you are awesome for trying different things keep up the great work 👍
You're rolling now dude!
*You ALWAYS have mesmerizing content!*
Nicely done young man specially doing it solo
Love your work ethic......love the channel!! Keep on working young man!!!
It is so awesome to see this
Looks great so far
love it so far, caught you with the VW refinish and like your videos
Looking great!
Looking good cant wait to see the rest!
Another great video. You really put a LOT of work into this. It should turn out great!
Great build series. Working on one of my own on my channel. I was just going to do the luxury typical build but you def inspired me to bring a very similarly thought out build oddly enough. 😁
for a young guy...really well done. do not take on board the negative assholes with shit comments.. your doing brilliantly
I like how you added a toon to make it a tritoon
that metal strip is gonna be hot! - love the project.
It’s aluminum it’ll be okay
Exactly. I’m doing the same thing now I’m wondering what I can do so it won’t be hot when people step on it?! Any suggestions?
Keep up the awesome work
A really nice job.
Interesting project! Not sure I like it yet, but i trust you do amazing!
Looks awesome! 👍👍
This looks really good!
When I first saw it in the thumbnail I was iffy BUT seeing it down it looks way better than I would have ever thought! Have you thought about flipping the ski locker door over so the band name is on the inside? Either way, I think this will be very cool looking when finished.
Love the build. Are you still planning on putting the second deck? Cannot wait to see your fire pit.
looks great, thank you for the video