Those FWD Cadillac hearses starting in '88 had the good 4.5V8 and in '91 got the even better 4.9V8. Way more reliable engines than the 4100. Kinda sad seeing another one get mashed. That Mopar was ashes!
I remember when those commercial chassis’s were new. My dad drove plenty from ‘89-‘93, working for a limo service that serviced many area funeral homes at that time.
Next time you have a van crushed, see if the loader operator can find space to stave in the doors prior to crushing it. It will make a much better crush bale.
Poor lesabre my mother used have a wonderful 1999 lesabre unlimited with cloth seats and it’s white with the special wheels was standard on limited option on custom
So I have watched you guys squish cars for a few years now. I am surprised that, in this example, the hearse you flattened vs selling on ebay, even some of the worst basket cases sell for several thousands of dollars - I understand that most of the cars you guys squish have rusted out underneath but what about the insides? I can see squishing it after ebay fails.
So were you hired just to come in and crush everything he had or were these vehicles bought specifically for crush weight? Clearly non of these terds accept maybe the lesabre have been a in demand parts vehicle in over twenty four years.
Why isn't the driveway areas ever cleaned up, seems like it would be easier to drive through and around. Fill the cars up with the junk around the crusher, doesn't make any sense to me to be so cluttered of an area to work around and in.!!!!!!!
Goes to show how quality control has come along since these heaps of trash were build. I have an 2005 Audi A6 with no rust whatsoever... I thought with that Plymouth; "please, put it out of its misery!"😄😄
Those rusty shells came from the hearts of dying stars.
That Plymouth was beyond saving. Looked like a donor car that gave quite a few parts. The rest went to the whim of the elements and time.
Amazing that the springs of that van still have a couple inches of travel after all that
Man the G20 Chevy van had awsom rocker panels on it.. 🤣🤣🤣
Kinda neat when you think of the first 2. A person's time on earth started in one, and ended in another.
1:51 to 1:52 That edit took the rear of that van from relatively intact to shredded in a millisecond. 🤣🤣
It was so quick, I had to left double click and go back 10 seconds to see if I missed something. 😂
If you can give us a tour of your totally awesome junkyard just asking my friend
The place is called Rays salvage and junk repair go have a look at it for your self
In Michigan or where at totally awesome junkyard on CZcams just asking my friend
@@tedpitts3201 Wisconsin
Damn that G20 one was so huge it took up the entire space in the crusher!
Thanks for another great video you can't even tell what the Caddy was. Keep the videos coming 👍 😎
Thanks for making more videos. I love to watch them.
Buick Le saber a great car that gets no respect … they all seem to b gold in color
Hey I needed both of them headlamp assemblies off that 2000 Buick century 😭😭😭 great video tho, thanks for sharing this with me,👌✌️👍.
RIP the funerary Cadillac 😭
Wow. Imagine now, the metal from the now ex hearse will be used to make your future fridge, stove or drink container...
Reincarnation?
It’s the final curtain for that hearse!
wow that Fury was rusted out for sure. And notice the front lights and grille on the Caddy survived!
wow that's a real heavy load
I used to have two Vans that's in color . One was the GMC the other was a Chevy
Love from Morocco ❤
Those FWD Cadillac hearses starting in '88 had the good 4.5V8 and in '91 got the even better 4.9V8. Way more reliable engines than the 4100. Kinda sad seeing another one get mashed. That Mopar was ashes!
I remember when those commercial chassis’s were new. My dad drove plenty from ‘89-‘93, working for a limo service that serviced many area funeral homes at that time.
Wisconsin Winters can be brutal on a car
That's one creepy hearse too !
3:33 Listen carefully. You can hear its last words, "Bwah ha ha hey.....HEY!
Top
Next time you have a van crushed, see if the loader operator can find space to stave in the doors prior to crushing it. It will make a much better crush bale.
Poor lesabre my mother used have a wonderful 1999 lesabre unlimited with cloth seats and it’s white with the special wheels was standard on limited option on custom
New loader operator? This was like watching paint dry.
Going by the state of the first three in the crusher I'm guessing Wisconsin gets a lot of salt on the roads in winter?
"Butter" plates on the plymouth, been there a while... New guy on the loader?
When the van is first crushed its not as flat but in the next scene as they're starting to load the hearse the van looks much flatter.
Eventually even the herst go's to the graveyard one last time
i wish i worked a junkyyard so i crush cars to
You should get someone to run that loader that knows how.
Man, a lot of heavyweights this go-around. Couldn't wedge a Dodge Colt or Honda Civic somewhere in the mix?
Where do you take them or store them after you crush them
You guys have a lot of these hearses it seems
That fury was crusty rusty.. nothing left to salvage
Yeah, I think it finally got put out of its misery!
You could have popped off those tail light bezels off that van they are going for a lot of money nowadays because they're so hard to find
🚒🚔
👍👍😀🇨🇦
Is this a loader school?
Such a shame they all just needed a lick of paint!
So I have watched you guys squish cars for a few years now. I am surprised that, in this example, the hearse you flattened vs selling on ebay, even some of the worst basket cases sell for several thousands of dollars - I understand that most of the cars you guys squish have rusted out underneath but what about the insides? I can see squishing it after ebay fails.
Is only garbage, only older an more collectible cars in such conditions may be worth saving, plus Is a hearse, nobody normal wants one lol
EUREKA !!!!!!!!!!!!!!
An associate of mine drives a Chevy Van much worse than that
Were are yall located at
Buick LeSabre probably dead engine for bad alternator and broken pulley belt tensioner: a common fail in 3800 V6 GM engines
Why would someone junk a car for that? That's not an expensive repair. Those 3800s will last longer than any Honda Accord I'll tell you that.
@@davesoucy1086 Really?? I owned a old Buick LeSabre 1997 and as a junk cars. Honda and japanese cars are much better car
Lee Man Ki Jumanji
Any limos????
Would you sell some of the car tags/license plates im wanting 50 or so
So were you hired just to come in and crush everything he had or were these vehicles bought specifically for crush weight?
Clearly non of these terds accept maybe the lesabre have been a in demand parts vehicle in over twenty four years.
I was born 1989
Whats the point in crushing the cars?
fatigue rust belt steel lol
Certainly not a colorful group of cars this time.
As always thanks for destroying these hideous vehicles. Some of them should had been done 20 years ago.
Why isn't the driveway areas ever cleaned up, seems like it would be easier to drive through and around. Fill the cars up with the junk around the crusher, doesn't make any sense to me to be so cluttered of an area to work around and in.!!!!!!!
Wonder if the hearse had a dead body in it 😂😂😂
Or The Undertaker 😂
Goes to show how quality control has come along since these heaps of trash were build. I have an 2005 Audi A6 with no rust whatsoever... I thought with that Plymouth; "please, put it out of its misery!"😄😄
aplastar ! no reciclan nada
no es bien visto. ☻
Shit those Cadillacs had to deal with all those religious people and then y’all crush them…
We WILL abort baby Jesus to make up for it…