Mercedes M113K Spark Plug DIY | E55 W211 (4K)
Vložit
- čas přidán 20. 12. 2018
- In this video, I show how to change the spark plugs on my W211 E55 AMG Mercedes. This video directly applies to all m113k Mercedes including the CLS55, S55, SL55, G55, and CL55. The basics steps still apply to all m112 and m113 engines.
Links to the parts mentioned in this video:
Spark Plugs NGK ILFR6A www.fcpeuro.com/products/merc...
Plug Boot Tool
www.fcpeuro.com/products/merc...
Mann Air Filters
www.fcpeuro.com/products/merc... - Auta a dopravní prostředky
Note at 5:31 to make sure that you put either very little or no copper grease on the plugs. There is a debate on the internet about whether to use it or not. Plugs like these NGKs already have a coating on them, so it's not really necessary. Yes, these Mercedes have aluminum heads that expand and contract with heat differently than the plugs and have long intervals, but NGK does not specifically recommend it.
Are the NGK's better than the Bosch plugs? I want to change the plugs and wires from FCP Euro.
@@antoniohardy5981 Hi,
dont do that...i ve bien reading a lot about it...none other makes Better than the NGK iridium and last as long. Yess they are a bit costy. i have same M113k ✌️
I don't even have a Merc let alone E55 but one can notice that this content is of high quality with very useful tips and instruction.
same...im an m5 guy and I love his videos. I have learned a lot about mercs
This is gonna help a lot of people just starting to repair and maintain their own E55s. Thanks meister, from Germany.
I’m speechless. Will be saving $581 even after bringing OEM plugs to the dealer. Thank you!
This is 1 of the most helpful channels on youtube. Very high quality footage and clear directions☺
Great DIY. I did my spark plugs in the M113K the same way, reused the coil wires. Good idea to inspect the wires connectors inside boots that attach to spark plug top and coil carefully for any electrical corrosion. I replaced one wire with crud in it similar to a battery post. Great post!
This is the most beautiful E55 I've seen on CZcams. I like the minimalist look, not overdone with a look that's in your face. A snowflake from the outside, beast from the inside. I can't afford to own a petrol Mercedes engine for now, but I am happy with my W211 E280 redesign (3222cc/177hp). Maybe one day I'll own or even have the chance to drive one E55 since it's my favorite car of all time. Great video!
Quality! We sure need more videos like this. You should make a video on how you maintain your engine bay to be as clean as new always.
I doubt I've seen higher video definition quality than you're showing. Absolutely excellent. Your instructions are very clear as well. I don't have one of these cars but wish I did!
Excellent guide! Cheers. I remember replacing the plugs on my E55, what a PITA. My M156 on the other hand was a breeze.
Very instructional video with great tips and very well filmed. Just recently acquired an E55 and its great to see this model well supported by your efforts!
This is the most clear video that I ever seen for spark plugs replacement.
I drive W210 and will follow your excellent guidance, many thanks.
Another fantastic video. You manage to get the camera angles and explain it all so well. Many thanks!
I have a 2006 E55, white with the panoramic roof. 144,000km (I'm in Edmonton). I'm parking the car for the winter and that's when all the little projects are going to happen, like fixing the seat air pump issue, spark plugs, supercharger oil change, etc. Your videos will come in VERY handy! Thanks for the awesome content!
Thank you for this great video, simple and informative! Just finished up my ML55 and now it is time to tackle the SL55! Thank you again!
Just bought a C55 this week and plan on changing the plugs this weekend. I'm going to do the Valve Cover Gaskets at the same time. Great Video and thanks!
I watched this as there are few videos on working on my SLK32 AMG but I think after watching this video the same rules apply and I'm feeling confident in taking this on myself instead of paying the $700 something or $1000 my mechanic wants which is just rediculous. Thanks for the great video!
Hope I have more room in my C215's engine compartment... am replacing them myself the next time.
Thanks for the great tutorials!
Thanks for sharing this! I have also an e55 like this. Butter right now I do hesitate a little doing this kind of work by my own. But these Clips help to unterstand more and more. ...
GREETINGS from germany
Thank you so much for this video. I just finished replacing my spark plugs for my 06 cl55 🙏🙏
Thank you for the outstanding and superb video tutorials. I am very happy, I was able to change the spark plugs on my 2005 E55 AMG, all by myself. I appreciate the car that much more, being able to work on it myself. Cheers!
Awesome channel with a super detailed video. I'll be doing my e55 plugs shortly this was a huge help. When I did the valve cover gaskets I never knew the intake came off so easily so I worked around it that simple step would of made it so much easier
Aaron McAnulty how many miles did you go before deciding to change the plugs?
Excellent video, helped me with my SLK 55. Thank you!
Excellent content. Keep it up!
An excellent video clear and concise...Now I’ll get on with mine!
I did not know you wear a master mechanic , Excellent job !
Great DIY.
Overall this job is pretty same for all M113, M112 engines. Personally i use Hazet 2771 spark plug boot puller and Hazet 4766 Spark plug socket when i change plugs on My M113.
GREAT DIY. THANKS!
I also did this a couple of weeks ago on my M112k. Didn't use anti-seize on the threads. I resealed the valve covers and breathers too. I also replaced the wires with NGK wires. What's your opinion on NGK Wires? They're performing well imho.
Nice video, I’m going to replace the spark plugs for my M278 this week and record a video.
Clean job!
Great DIY, will have to do the 16 on my e430 soon
Very nice tutorial!!! Great!
Good job. You saved slot of people a ton of money
It is so clean under the hood pleasure to watch. Very neat job. It is pretty easy but still good to have tutorial video just in case.
Good tip, even though you didn’t actually say it, to use a glove to cover the throttle body opening after removing the air boxes. I never thought of that! In hindsight now, it seems obvious! Thanks!
I rather use a clean microfiber cloth and an elastic. In case you start it before you remember to replace the filter housing, that won't get sucked in.
Good video. Nice job. Not as hard as I thought it would be.
Thank you, I'm about to by myself a 2006 s55 amg for my Bday and your videos make me so much more comfortable with this purchase. I was worried maintenance costs would eat a hole in my wallet.
Great DIY, amazing 16 plugs lol
Very good video and an easy step by step process! However I was informed that cooper grease isn’t the best thing to use for spark plugs especially near the tips of the plugs, only use the Silver grease.
Between this channel and legitstreetcars everything is covered on the E55 from mods to maintenance to fun facts
Awesome, no bs, thanks!
Very helpful, thank you!
Thanks, i like your channel.
Can you do a video comparing CL55 and E55?
Good job!
I was thinking just how difficult Mercedes has made this task . That's a couple of hours of reassemblling . Having said that they've made a beautiful engine .
Wow was perfectly descriptive video
Where the link for that flashlight? Great video once again.
Man, that is one clean car.... I'm so jealous (as a E55 owner)
Good job
great video, perhaps would be nice idea to go through maintance works like: replace spark plugs every X km, transmission fluid replacement every X km, coolant, accessories belt, ect every X miles. Just a reminder how to properly maintain AMG according to M-B documentation. But detailed description of certain works is great!
Thank you 🙏🏽
Thank you very much Alex for another extremely useful video. Exactly what I was look for as its probably my next job. Your channel is the best out there for help and fantastic info on W211/W219 55K amg.
Alex can you please advise on the spark plug service interval. Woul it be every 40,000 miles?????????
Happy Christmas to you from Ireland
Kind regards
John CLS55AMG
100,000 miles
Hello. Thank for this awosome video. I am about to pull the trigger and order a set of plugs and spark plug wires. Which spark plug wire would be better? Bremi or Bosch? if i am not mistaken the Bosch is OEM?
Great video! is there any MB clubs to join in Vancouver?
Absolutely love your videos!
What is the name of the song used throughout the video? It's quite pleasing to listen to
Good video👍👍👍
Hey Meister, I’m new to your channel. Grateful for the amg contents you created. 🙏
I’m asking for recommendations from you or anyone that can chime in. I’m looking to purchase an older amg. There’s 2 options. 2011 ML63 M156 or 2012 ML63 M157. Please give me feedbacks. What do I have to look for such as weaknesses and advantages. I will have the pre inspection done at the Mercedes’ dealership. My worries are the air suspension failing and timing chain failures. Thanks 🙏
Your the best!
Very good!
How much is the spark plug removal tool diameter? I mean, I'm trying to manufacture it somehow. What is the plug boot width? Thank you!! Awesome tutorial!!
I wesh you all the best👏👏
Oil , or what appears to be oil but is actually accumulated combustion fluids on the threads , actually comes from inside the combustion chamber and is quite normal to some extent.
Please don't take this as criticism of your vid , just trying to help everyone who finds oily liquid on their plug threads.
Hi, from what power of engine you suggest to use colder sparks? I have right now 77mm pulley on SC should I go with colder or it is still enough to have standard factory plugs? Thanks in advance for your reply. Rafi
How is your engine always so clean?
Another great video,,,good job. I have found pushing those boots back on to be quite difficult,,needing the 17mm spanner to help.
Did you lube the boots or the white of the plugs ?
Lyle I didn’t lube the boots, just cleaned them.
@@AMGmeister Ok thanks , I have seen some spray them with silicone but I'm not sure if that's a good idea.
@@AMGmeister I see the way you rotated the boots a little as you push them down ,,,good technique to help them click back on.
One more question before I tackle this project today. Did you take all 16 old spark plugs out and then install the new 16 or did you take one old one out and then put in one new one then repeating for all 16?
Love the AMG and love the videos. What is the song title at the beginning of the video. ???
Great video but I would like to add one more critical step: After you clean the debris out of the spark plug holes, crack the spark plugs loose and spray a small amount of WD-40 around the spark plugs and let it sit for 10 minutes or so. I did not do this when I changed my plugs and the result was nearly catastrophic. The spark plug threads that are closest to the pistons had a lot of carbon built up on them and as I unscrewed them the carbon made one plug seize up in the head. This only happened on one plug but the result was that I had a spark plug completely seized half way out of the head. I thought I had ruined the whole head. As a last-ditch effort, I sprayed some WD-40, let it sit, and then slowly worked the plug back and forth until it finally started coming out. Yes, the engine smoked a bit on startup, but I nearly ruined my head by not doing this step. I'm sure it was a freak occurrence, but it's easy to prevent. Thanks
Phillip Todd Good tip!
On my CLK55. Have found that taping a short extension to the spark plug socket keeps it together when trying to remove from cylinder head. The rubber on the socket wants to stick to the plug and stay down in the hole.
Hi! I was wondering if you can comment on something I've been reading on the forums...this transmission adaptive memory reset? Have you heard of it or tried it? Something about putting your key in and turning the electronics on and flooring the pedal for five seconds?
6:16 - how did valve cover gasket oil leak cause oil on spark plug threads? The gasket does not provide any direct seal for spark plug holes. Are you saying that the oil leaked from gasket onto coils, then followed coil wires down into spark plug opening?
Thank you
Excellent video. Thanks for posting it. Does this work for the SLK32 AMG? Thanks
Should work exactly the same
Space was extremely tight on my C32 (M112K as the SLK32K).
My CL55 has more space strangely.
did you spray the contact cleaner directly into the spark plug boot?
Greetings from Ireland Alex. Can you please advise me on the service interval for the 16spark plugs? My 2006cls55amg has 52,000 miles. According to the service book they were last changed in 2016 at 35,604miles. I'm getting prepped to do the valve cover breather oil leak and am tempted to do the plugs when I'm in there. Don't want to pry off plug leads leaning on valve cover and damage new gaskets in a few yrs time. Any thoughts from you be greatly appreciated!!!!
Definitely one of if not the best how to DIY videos very well done, with all the tools and tips. With good lighting and voice over. Other You-Tubers need to take note.
I just did my wires. Are the boots supposed to click into the plugs? Or are some wires different than others
Does the car feel different now that this job is done.
Would you happen to know the gap size for the spark plugs. I have a 2004 mercedes e500
Hey mate, how do you clean all the little holes in the supercharger?
Please advise why there is always a black oil mark on the left hand side of the supercharger on the top on nearly all k engined cars
I bought BERU UPT14P for w211 e55. One cost in Europe about 4€ , when you get them cheap.
Hello. I added a comment to your video on the oil level check from the instrument cluster. A year old so you probably haven’t seen it. Anyhow, I can get to the same screen but mine is blank, doesn’t even show a line for the oil level. Could this be a sensor? 09 w211 E63
👍
How much time does this usually take?
what kind of torque wrench is needed for this job
Copper grease increase corrosion process ... of course need oxygen and some moist but ... thread is long enough to allow good conduction of electricity and made good quality of sparks. Personally will not use grease, will thighten with max. 28NM avoid troubles in future.
Thank you sir 🇬🇧🇬🇧🇵🇰🇵🇰
So we'll done makes me feel like I can do it with out busting a knuckle 😂
👍😉
I Think it was bad ass,,,I have 04 sl55 gray black/5.5 with carbon fiber spoilers /front rear.....will smoke E 55........lol 0 too 80 4.2
But does this also apply to the M113 E43 found the W208 CLK e430?
Yup
You change the final torque value when u add the grease. Same reason why you dont put anti sieze on wheel nuts
What's the intro music?
Checked my MB WIS. Spark plug torque is actually 28Nm not 25Nm 5:53
The coils on mine have zip ties. Did you cut these off in order to remove them?
Jason Brody I didn’t cut anything, this engine was completely original. Sometimes the clips break on the wires going to coils and the tech zip ties it to hold.
Thanks so much for your reply. Love your channel and appreciate all the videos.
Copper with aluminium engine heads made a power cell and corrosion. Do not use it. If you need grease (not cecessary) use special high temperature, low resistance without copper. Sparks must are screwed up to max.25nm of torque. Do not exceed it avoid destroy thread.
Excellent job ! However, you don't need to put copper grease on the threads of the spark plugs because there are manufactured with specific treatment in order to avoid rust. The grease will collect dust over time.
Saleen SHELBY yes, exactly. NGK specifically says on their packages that copper grease is not recommended.
Saleen SHELBY Thanks guys, I just looked at the bulletin. Oh well, I didn’t put much on, a small dab does no harm. I pinned a comment at the top about this.
Gee... It's just so simple to work on these modern cars of today. The engineers are sure earning their pay nowadays