Video není dostupné.
Omlouváme se.
Pop Out Dents in a Motorcycle Gas Tank
Vložit
- čas přidán 17. 08. 2024
- A tutorial how to pop out dents in a motorcycle gas tank without special tools. DIY Paintless dent repair. Try this before spending big money on repainting your bike.
Support this channel, Search Amazon tools and parts link amzn.to/3OAo4pF
Amazon Air Blow Gun amzn.to/2xywyrd
Amazon Inner tube amzn.to/32IUAQk
Dent Puller Kit amzn.to/2QKnwBY
Double Pole Bridge Dent Puller amzn.to/2Gjxng9
#motorcyclerepair #hondamotorcycles #gas #gastank
If I hadn't seen it. I wouldn't believe it. Good technique.
Probably the best video on removing a dent out of a tank ive seen/found
GT 250 tank I used a 16” bicycle tube I picked up at dollar store. Shoved the whole tube into side with dent. I should have heated tank a little in sun or with heat gut but thank God the dent popped out just as the tube popped! Looks much better now. 👍 Thanks for the great idea.
Thanks buddy! 4 yrs later I'm trying to figure out how to fix a 40yr old tank. Looking on ebay and the only one is in worse shape than mine!
This has made my day. Bless you.
Very inventive way to approach dent removal. Often warming the metal helps encourage the metal to move more easily. I have a dent in a rear quarter panel to remove when the weather warms up and was thinking of using an air wedge. After seeing your technique, I’m going to copy it and use an inner tube and my compressor. Thanks for making this video.
I would have NEVER Believed this would work until i found this video : ) .... This is a breath of fresh air . thank you
Good idea but it's better if you have tank mounted on the bike then pressured. The pressure sometimes makes other parts of the tank expand. This will make a hard time fitting tank back on the bike. Found out the hard way.
Fern C, a really good point made, i was thinking of that myself wondering how to get around that problem. Thanks for this info.
I unintentionally destroyed a tank by doing this. I was lucky to find a decent replacement. Good Kawasaki F7 parts have proven to be tough to come by.
I would NOT have believed it had I not seen it!!! Nice job! Very creative method!!
This is genius! I have just purchased TWO 2012 Honda CBR250r motorcycles. The red one has a sizeable but not creasing dent in the right side of the tank, plus it is fuel injected so it has a sizeable entrance hole in the bottom of the tank tank for the fuel pump. i can see now this is going to WORK...Thanks...Al
Glad it helped!
This, and your other videos, give me the confidence to tackle my DIY motorcycle obstacles! Thank you sir.
That is great. Thanks so much. 👏
Gonna use this method to fix my tank! Got a 02 vstar 1100a that has a few dents in the tank
Nice trick! I've been doing electrolysis on my gas tank for the past few weeks and it's got a couple small spots pushed in a bit. This strategy should work well after watching how it worked for you.
Good Idea for easy flop out dents, it's no use for sharper ones, but never the less, it's an option when possible.
Holy shit! Brilliant! Just what I needed to fix my dinged up dirtbike tank. Thanks for posting!
Brilliant, I tried it and worked a treat, got almost all of the dents out, Thank you
wow, this is amazing! why isn't anyone else on youtube doing this?
That’s awesome, I’m gonna have to buy a dented tank for my vtx1300. This might save me a lot of time and effort. Thanks man.
I've done the same process but used a scrap gas cap with a tire valve mounted in it. I think I like your way better!
That's brilliant! Gonna try that on a '70 Yamaha tank...puller didn't work but I'm sure this will!!!
Thanks fer sharin' !
Or a combination. put the tube inside and pressure it up, if that won't do it add the dent puller to it.
Just when you think youve seen it all. You are a genius. My CB77 and TX500 have found a leader.
thanks will try this on my triton alumina tank
Thank You Brother , I will try it on my TX 500 .
I have to try this! Thanks for your advice.
To support this channel go to Amazon through the links below and make any purchase. They will bring it to your door.
Amazon Air Blow Gun amzn.to/2xywyrd
Amazon Inner tube amzn.to/32IUAQk
Dent Puller Kit amzn.to/2QKnwBY
Double Pole Bridge Dent Puller amzn.to/2Gjxng9
Can tank crack when poping out if accidentally put to much pressure in.Thanks
Glad I just found this bought a Sportster with 3 dents in the tank last weekend and was thinking it was gonna be a pain to fix but this looks easy
Did it work?
Did it work?
I think Harley tanks are much thicker and it would be harder to pop them out.
Wow I'm definitely impressed would of never thought of this
Nearly missed this video. I thought it could be one of those business self promotion adverts. Good video
you mean my thumbnails are getting that good? or that bad?
just use a whole tube , and use the valve and stem complete , no need for the messing about , just get on with it. the valve stem will stick out the hole and work fine
works well on door skins too , but it can move the whole panel so take care , but its still better than a dent , works really well on big soft dents.
Great idea. Going to try it on some vintage outboard tanks.
Thanks so much, maybe even I can do that. Some of told me fill the tank with water and freeze. I just did not like that idea. Again thanks.
Great technique kudos to you! I have a tank with a dent I may try it on.
I just brought a honda vt 1100 and it's got a dent in the tank, I'm going to try this method . Thanks for sharing buddy.
I just got a Honda as well! My first bike ever. Has a dent in the tank as well
Did this work for the Honda 1100 I just got 2003 vex 1300. Fell over on way home in trailer. Big dent in my can
Very cool, heard of this but never saw it done. Thanks.
Cool, can't wait to try this! I might even be able to get an extra gallon or two in there!
Go for it!
Thanks that helps me a lot Thanks again
Awesome work, now to do some SR55 work
Thats great! Im looking forward to trying this on my tank.
-Now I believe in Santa AND MacGyver too !!! LOL
Genius! The mans a genius I tell ya. Awesome job. I love watching your videos your a lotta help keep doing what'cha you do
That's pretty smart I like that interesting
Wouldn't have thought that it would work, but it did. Thumbs up!
Outstanding!!! Thanks!
Very welcome!
I learned something new today, thumbs up. 🍻
I got to try that.💥
I have to try this I am restoring a 1972 Hodaka Wombat with dents on the top of the tank I was going to take it to one of those paintless Repair places nice Job
Thank you. Saw other similar videos but I like your simple solution best. Might add the heat and cool trick
That's worth a try.
Brilliant... the master of diy fixing tank dents lols
Great job mate I will try that on my tank
Awesome going to try it on a Reflex Tank
Hey thanks for the inner tube idea, great
Thanks man, going to try it next week.
Have fun!
You are a genius
I'm not British, but that is bloody brilliant
excellent
I wouldve never thought that would work. Nice!
Right on!! very creative
Thanks
Great video, very impressed. I have just bought a Bonnie with a large dent in the top of the fuel tank, so I will look at trying your technique, seems a lot better than resorting to hammers etc. Thanks a lot, Liam Hemswell, UK
Wow that's so cool.
Good thinking.
Hi this is cool idea.
I was like, what is this old back road country a...... Wtf did I just see!! It was beautiful!!
Impressive demo, but I couldn't help wondering whether it was really necessary to cut that section out of the tube? Presumably it would be much harder to get the tube in and out of the tank if you didn't? Also, good point about doing it with the bike in situ, on the bike, to avoid expansion in the wrong places and making it impossible to refit! Finally, you've written 'technik' when you obviously mean *technique*.
Some cool techniques thanks for sharing guys like you and these videos are a really awesome thing to have especially to teach the future generations Some of the old trade secrets and techniques especially that many of these trades dont have a lot of people interested in doing anylonger my Grandfather was a auto body man and welder way before Bondo or polyester body fillers were invented i actually in heated a car he had lead filled all the dings and imperfections on years ago as a favor to my Father fo a repaint
You da man SOLD
that is a Good idea
i have a Aluminum frame with dented tubing might just try that .
just ordered paintless dent puller kit
Amazing this is just what I need.
Great technique!
Brilliant. I will be trying this on my CX tank!
Thank you.
Great Process !
Thank you!
Absolutely perfect. Thank you for the upload.
great idea...
Great idea, thanks for that. I will try this on the dents in my ZRX tank.
Very clever. Thanks!
You're welcome!
Great Job.
The second tank make the tube blow up because it had deeper dent, means edges over the dents and heavier works.
Fantastic hombre! Loved every bit of it.
Amazing. Great video
All be dipped. I was even thinking about how to pop a dent out of a tank with air. And wouldn't you know it I gotten figured just didn't think a tube would do it
crazy and wild yet amazing
You utter genius!!!
Smart ideas.
I'll try it .thank you!
Ingenious idea
Glad you think so!
Thanks great vídeo. Greetings from Chile!!!!!!
Good job was just thinking how to get to dance and I think that’s perfect perfect perfect perfect good idea buddy
Great stuff!
good job, thanks for the idea
Good job sir
Wow I have the exact same dent in my nighthawk tank man those things sure are prone.
Cool!
Nice one. Thanks.
You bet
All I can say is WOW
just fabulous !!!
Well done , brilliant idea.
Excellent!
Ace!
Awesome
Very good. Great idea.
Great work
Thanks
So dang smart
Wish I would have seen this before I did a bondo job on my tank