Something's Wrong Here - Off Road Wrecker Problems!
Vložit
- čas přidán 10. 09. 2022
- So I got a build project but the engine has major problems.
Pick Up Matt's Straps Today: mattsoffroadrecovery.com/coll...
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
Flash Flood Sinks The Ford Truck!
• Flash Flood Sinks The ...
I Have NO IDEA How You GOT THIS FAR In Your DODGE CHALLENGER!
• I Have NO IDEA How You...
Look What Tennessee Did To The Morrvair!
• Look What Tennessee Di...
It's ALIVE! We Got It Started!
• It's ALIVE! We Got It ...
My Crew Almost Died, The Scariest Job I've Ever Had!
• My Crew Almost Died, T...
We're Making Some Noise With The World's Largest Off Road Wrecker
• We're Making Some Nois...
Fully Operational Lift For The World's Largest Off Road Wrecker!
• Fully Operational Lift...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffroadrecovery.com/
Matt’s Straps, how we tie down our vehicles
mattsoffroadrecovery.com/coll...
10% Off the best parts for your Off Road Vehicle Barnes 4WD
www.barnes4wd.com/?ApplyPromo...
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Follow us on Facebook!
/ mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery! - Auta a dopravní prostředky
I told my friend a joke about carbon monoxide poisoning…. He died laughing even though it was a tasteless joke.
Of course bleepin jeep would be in the comments with this kind of joke 🤣
That joke is deadly funny.
Badum tish!
That’s silent butt deadly! Lol
You stole my joke lol my grandfather said that to me growing up it was funny as I did live but that gas had my confused at the time till that rat I thought was my grandfather stopped talking to me. Man what a day that was
“I will do 20 minutes worth of work to avoid 15 minutes worth of work”
That one hit home with me 😂
Truth
It's on my to do list for tomorrow matter of fact 👌
I spend a lot of time tryin to save a little time
@@brapbrapmafucka all the time
OR you just finished a 3 hr job. then saw the way where it would have only been 1 hr.
4:20 that moment when you remember that you have always wanted to install an exhaust extractor in your shop.
Or turn the beast around so the exhaust is facing out the roller door.
@@johnt.848 lol, it seemed an obvious solution ...!
Matt, take a 9/16" (15 mm) wrench, loosen the distributor, adjust by sound, then retighten distributor.
Oh, wait..... wrong century. Never mind, keep doing what you're doing.
Even in this century, many times you still have to adjust your crank/cam sensors to give signal when you are actually at position. So you are not tuning the system with it, just calibrating the sensor to give TDC reading when you are actually at TDC and you are done with it on the mechanics side.
Hahaha! Love it!
You could go into the fuel table add or take away then add or regard timing kinda same as what you said but newer engine it seems like Matt always has to go through the hard way
Lol I wish that was still the way. I think you mean 14mm by the way
Gap the points with a dime, advance timing until it just starts to 'ping' under load, back-off timing just enough to eliminate ping under load & your done ! ! !
I can see Matt driving down main street Dr. Pepper in hand without the cab, just a seat, steering column and a big smile, Mad Max ish. Winter is coming, it be time to show the Snow Cat some lovin. Never a days rest.
Little creepy doll head on his hat....
I once saw a rolling truck chassis being delivered to coach builders, which was being driven with no body parts. The driver was out in the open, wearing a motorcycle helmet. Thinking about the Heavy Wrecker, it can surely have room for no more than two, or three at a stretch, people, so they'll still have to take the Morvair or Jeep for the crew.
@Stu Nick I was thinking about the Snow Cat the other day as well. News last night was showing snow in Co. already. Sooo much to do, So little time. The Frankenana is Job One for now though.
Those thermal cameras have a hard time with shiny surfaces. Hit a spot on each header with some exhaust paint and you will get a more reliable look at what's going on.
Loving the build! Keep it up!
It is all about "emissivity" which varies with the material and the surface. In the mid 80's I worked for RayTek building and calibrating IR temperature measuring systems.
Its a waste really when a laser point heat gun will tell you all you need to know. Though i do love FLIR cameras for finding shorted electrical issues
@Grant Davis I came here to mention emissivity but you beat me to it
@@rickstorm4198 Laser points also have limitations with reflective surfaces. My laser point came with a reflective surface chart based on material if I recall correctly.
@@rickstorm4198true, but if you had a FLiR camera laying around you're NOT gonna use it??
Most have heard of Rosy the riveter (WWII workers) but here we get to watch Lizzy the Welder!😁
Give me the old flat heads. Engine Computers can be a night mare to tune. Just like to have timing and points to set. I guess I am a little old. Great progress and will look forward when it wheels up the mountains on work.
Your crew reminds me of growing up with my dad helping him with his logging business. It was always cool having people around the shop maintaining equipment
Is that those things that just poke up out of the ground? 😆
@@Bryanja81 no it’s the things that hang from the heaven
I appreciate that they’re using for all intents and purposes a junkyard engine. I can’t stand the shows that have $1 million budget ordering crate motors and thousands of dollars of merchandise from specific online retailers which turns the entire build into a commercial. I love the way Matt and the crew just make a deal. And transform regular cars and trucks with just stuff anybody could get.
@@hidel308 That's why I stopped watching one of the channels that does it. I couldn't take any more of the commercials.
@@Bryanja81😢🎉😢
notification squad, Have a nice weekend!🔥🔥🔥
👍
You as Well
The only people who never make errors are those who never do anything. Problem solving is an amazingly valuable skill.
Lizzie is going to be a master welder one day. It’s cool to see her just tackle anything you set in front of her now without hesitation… She doesn’t even look remotely nervous anymore. Looks excited. Right on!
When the bell sound rang out, it should of cut to Matt and crew walking in Taco Bell
I'm on a bucket list vacation and I'm sitting in my hotel room watching Matt's. I may need therapy.
Can't wait for the day the wrecker rolls on it's own power.
Thanks MORR!
Two bucket list goals achieved in one vacation. Not bad
A Custom Built Fury Road BEAST by Matt's Off-Road Recovery! Basically, it's a Rock Crawling Tow Rescue Vehicle like no other. Remember - this thing is going to have 54" tires on it - six inches shy of FIVE FEET!
Where are you on your bucket list vacation The Dave?
@@MrEvanNoyes Better tell NASA !!
@@derekisthematrix New Orleans.
Lizzie’s weld are some of the best I’ve ever seen. She is a real asset to your company
Good to see you brought the REAL welder on the job , and she didn't even burn you one time 🔥🔥🔥
Didn't realize that there could be so much drama and fun when zeros and ones get together with air, fuel, and spark for the 1st time! 😂 Awesome to see this and thanks for sharing with us guys!!!
Hey Matt, you need to swap the flow path in the radiators. The rear radiator, which is receiving the hottest air, should also get the hottest coolant. Then pass the once cooled coolant, to the front radiator which is receiving the coolest air.
Its all a game of temperature differentials between coolant and air. And you want to keep that differential as high as possible.
The way you have it plumbed will only end up passing the hottest air through the coldest coolant.
Okay, but wouldn’t the highest temperature differential exist between the hottest coolant and coldest air??
@@buellb0y Sure, that's how a single radiator works too, and that's basically what you'd have in this configuration because the rear radiator won't have enough of a delta (temperature difference, or thermal gradient) to dissipate much heat. If you're feeding 170F air into the rear radiator from the front one, and then you pump 170F coolant through the rear one, you're going to end up with 170F coolant coming out, meaning your rear radiator did absolutely nothing for you. It's not quite that drastic, but when your cooling air and coolant are close together, dissipating heat requires an exponential increase in surface area dependent on the thermal gradient. In layman's terms, that means if your coolant and cooling air are nearly the same for the rear radiator, dissipating the same heat as that front radiator with an ideal delta would require 4x the surface area for the rear radiator. So why bother with two if you're getting virtually all of your cooling from one?
Ideally, a simple baffle separating the two radiators would give even better cooling than having the coolant lines properly routed, since you could give the front radiator ambient air directly from the grill and pass it up and over the rear radiator to the engine bay, while the rear radiator is pulling ambient air from underneath the chassis and pushing it directly into the engine bay. Then it wouldn't matter which radiator gets the coolant first because they're both getting the best delta possible from air at ambient temps. There's enough room between them that it won't affect the volume of airflow going into either. It would be a simple matter of dropping in a flat sheet of aluminum diagonally between the bottom of the front radiator and top of the rear radiator, boxing in the sides between the rear radiator and baffle with two triangular sheets, then securing them all in place. Air leaving the front radiator will be able to go over the baffle and around the sides, while the air going into the rear radiator is coming entirely from the bottom. It doesn't need to seal perfectly, but it wouldn't hurt to minimize gaps either. It would also have the additional benefit of having some airflow in the vicinity of the other coolers located in that area, since it'll be moving air in that vicinity any time the engine is idling, rather than letting it sit and hope the wind is blowing over them. Make everything work to your advantage by having everything work together.
how about a couple of up close shots of Lizzies welding so we can see how well she has progressed
In the old days we rebuilt a lot of engines and never had these types of problems BUT then everything was mechanical, no electronics and a lot more simple. Also had an old Diamond-T truck, looked like crap but just kept running, had a huge radiator and barely got warm. My current Ram 1500 had a new radiator put in a few months ago and it runs really cool, every out here in the desert when temps are above 110. Glad to see all the work you guys are doing and that things are looking up on the wrecker.
Ya "bricked" the computer.. Dropping power during a read/write is total havoc to the PCM. Got lucky they could get it fixed remotely. Can't wait to see this monster on the trails.
I think that is the power of the tech they called in for help as he knew what to do. I think I once bricked a PC a good number of years ago by trying to upgrade the BIOS and it all went sideways but at that time, I think the answer was, you were done for. Now, not certain if you can fix it or not but anyway, I do not bother with the BIOS. I have updated all the drivers however for the motherboard on several occasions successfully.
@@johnhpalmer6098 In the old days, a failed BIOS install could really only be fixed by replacing the BIOS memory (like literally removing and soldering a new one in). Nowadays, they have a redundant chip that they'll reload from, sometimes if you switch a jumper and sometimes just automatically if the BIOS fails to initialize.
@@JGuraan That's true, but most of us likely didn't know that we could just unsolder and replace the chip, let alone thought to do it, at least it never occurred to me in the past. I know more about computers now than I did back in the day.
@@johnhpalmer6098 Yeah, I don't know how easy it ever would have been to get ahold of one of those chips anyway. It'd probably be something you'd have to send the board to the manufacturer for, and who knows if they'd even be willing to do it. For all intents and purposes, prior to the redundant setup, a failed BIOS flash was a bricked mobo.
@@JGuraan That too, however, there are often markings on the top of the chip and a quick Google search these days can reveal the info on it, then you can likely find it's a common type of chip that can be had at places like Mouser and then replace, reflash with the correct BIOS info. Harder to do on older gear that's not been made in years or decades though, unless you can find an archive of older bios' from various manufacturers somewhere.
Mind you it's all conjecture now since as you say, more modern computers have redundancies onboard the motherboards.
Its great to see the progression of this build.
I was like this with the Morrvair and now even more so with the wrecker, can’t wait to see it on the trails
Who
Tom Tom is the man. God bless him and his.
I love how Lizzy looks exactly the same in every video. She's like a superhero in costume :)
She don't wear make-up like her younger twin sisters.
Looks like an automotive emergency room there. And the patient was flatlining for a while. Very interesting.
Just want to thank you guys. When I started my journey with MORR, the only things I knew about car engines were battery and windshield fluid. After watching your videos, I know what l those parts do. My mechanic no longer sounds like he's speaking Chinese when he's explaining what just broke. Thanjs guys
I dunno guys... Looks like fuel map might have a nasty hole in it, better lengthen the injector pulse another millisecond and if need be, adjust the NOS timing.
😁
Rig's coming along nicely, thanks for sharing the progress!
Not gonna lie, stacks are a bit tasteless anyway so I'm glad to see you going with a reasonable exhaust design lol.
LT is the man!!! He also helped me ,when I was building the top end of my Viper Truck with the 8.3 V10. He is extremely smart,and his wisdom is priceless!! Cheers from Canada!!!
I was just taking to my son about this engine! It seems like a forgotten gem…
@@roninkraut6873 definitely! Cheers!
Tom Tom with the CO humor.
Bare metal is deceiving on an IR camera. The problem is the emissivity is low. The camera is probably expecting 0.95 or so. Bare steel is varies quite a bit based on how polished it is, but the shinier it is the lower the emissivity. In some cases when looking at metal the IR camera can actually pick up reflections of something else.
You can try painting them with header paint to get a consistent value that is closer to what the camera expects.
That camera looked like the one I have, you can adjust them for varying emissivity if you know roughly what it should be.
@@marvindebot3264 Sure, if you know, but even if you polish the metal some level of oxidation will form on it especially once its hot and then what does the emissivity become? A painted surface should be pretty close to 0.9 or 0.95.
It's not uncommon to paint something you are going to look at with an IR camera just to make sure the emissivity is consistent.
It appears they are mainly doing comparative tests, so maybe it isn't critical to make sure the reading is accurate, but I just wanted to point out the common issue when looking at metals with a thermal camera.
Lizzy laid nice looking welds on those "stop-gap" exhaust pipes. My guess is Matt will run them as-is for the next couple of years!
I would watch if you just put a live camera in the shop, to just watch the process! Great video as always guys 🙂
LT is the man! It's nice to have someone like him in your circle of friends! He seems like a genuinely nice guy!
Tom Tom is a natural on camera. Always explains the situation and keeps us in the loop.
Hahaha, singing ooooo o'reily triggered an o'reily ad! Matt straps swing was AWESOME!
So good to see more of Tom Tom.m, just gives anything a go and keeps troubleshooting till he finds an answer
I continue to be amazed at all the work involved in the Big Banana build! The fabrication, the mechanical and engine work, etc. Trevor and Tom Tom are worth their weight in gold! And Lizzy is quickly becoming a senior level fabricator, while it appears the crew behind the scenes doing the filming and editing are par excellence! And then there is 'old' Matt, keeping it all headed in the right direction! I can hardly wait for each new episode!!👍
There's a huge difference between welder and fabricator. She is becoming a very good welder. No doubt about that. Every time you weld it's practice.
For me, Best Episode Seen To Date! Loved the troubleshooting, calibration, problem solving and especially the editing which showed everyone contributing. Authentic teamwork. Thanks For Showing.
I didn't see Lizzy doing anything... what's up with dat?
@@edbenson98 then who was the blonde welding the exhaust?
@@edbenson98 It appears you weren't paying very close attention to the video.
Remember last century when you could drop an engine in, hook up 3 wires and it would fire right up. I'm still hooked on the old 400/406/421 small blocks. I only have 2 left, a built 421 ci/500+ hp circle track engine and a complete untouched stock 400. I'm not smart enough nor are my pockets deep enough for these new gen engines. Glad you're sharing the build with us, Thanks
Matt's mind is filled with notes, sketches, diagrams and blueprints. He is a walking computer.
Can’t wait to see this beast in action
I look forward to these wrecker build videos all week. Trevor, Lizzy, TomTom, Skeeder, and Tucker add happiness to my day. Thanks for the great content.
Trust me as a header builder for decades 2-1/2” tubing will do fine for 500hp! As always it all depends on the engine and what it likes, the engine builder is the one that typically drives the the design and type of header that goes with the application. And trust when I say there is a absolute SCIENCE to that stuff!
You bricked it. Spoke too soon. You ressurrected it. Way to go!
5:06 Legend says Matt is still trying to screw that pop top back onto the glass bottle. 😅🤣😂😅🤣😂.
Wow what a job this was tuning this 8.1 V8. Tom is a valuable asset to have around for these problems and many more! I love Jamie sitting there with her phone not paying attention to what's going on she's seen so much of it already! Trevor is another good one to have around. This whole team came together and made progress today. I can't wait to see it in action!
A lot of royalty in that garage…Lizzie is the welding queen, Trevor is the wire king, TomTom is the tuning king and apparently Matt is the error king. 🤣😆
I’m so glad the coolest truck on YT will NOT be getting stacks.
Good on ya, Matt and crew!
Can’t wait to see it on the trail and doing work🔥
At least Trevor has sense enough to wear ear protection.
And Matt was almost yelling towards the end of the video with the engine off which tells you it was doing damage.
Unsafe working conditions are their shtick.
@@zekeabercrombie3583 Bloody dangerous, IMO.
Happy Sunday yall
please more of this build ASAP!!!!
The off road wrecker is coming along nicely. Can't wait for the drive.
Great troubleshooting gentlemen. This beast is going to be fun to watch. I bet with A/C on and idling in 110 degree weather you will need all that cooling.
Pulling a tour bus out of the sand...
It's going to overheat under load. Electric fans are for Camry's. NOTE: This engine does not come with electric fans... for a reason. Mechanical fans use 4 hp for a reason. They move more air.
@@TheBandit7613 racing teams use electric fans all the time. Why wouldn't it work in this situation?
@@mrpasciak92 probaly because when race cars are under heavy load it's not that long. Also they have methanol etc to help cool aswell. But I'm not saying you're wrong. Watching race week might makes sense.
@@mrpasciak92 Not enough CFM.
Don't see them on any trucks do ya? Nope.
There's no magic to moving air. All it takes is energy. The stock belt driven fan can be what, 3 to 5 horsepower? There's a reason. Imagine the electrical system it would take to turn two, 2 hp fans. That's a LOT of juice.
Fans are a frequent discussion on our Jeep forums. Matt's Jeeps (and Rory's) are usually running hot all summer. XJ's are at a disadvantage. Stock, they came with a smallish belt driven fan and a med size electric fan. They automatically run hot here. (I live 30 min from Death Valley)
My Jeep can handle any heat on Earth because I had a radiator custom made by a shop in Henderson Nevada. ($$$$) It's huge, takes up the whole front of my Jeep with a custom shroud. YES, the fan robs a lot of power when it's hot but it doesn't ever overheat.
Matt will eventually get it worked out, that I'm sure of.
Cooling systems are my specialty.
Awesome to see the 8.1 up and running good! I am excited to see how it drives in that big wrecker too...
Matt, I have an 8.1L Suburban and love it! Unsolicited advice: keep an eye on the oil level when you put the wrecker into service. 8.1L are documented oil burners. I go through 1 qt. semi-synthetic every 3K miles of regular driving, 1 qt. every 1K towing, and 1 qt. full synthetic every 1K regular driving and 800 towing. I bought it with 120K miles, have put on 50K, and tested different oils and conditions with same results but my experience may be mine alone.
I am really enjoying the Matt's Straps bits, Skeeter and the swing was great.
careful folks, the reply to my comment is a fake account using Matt's logo to scam!
I love how you guys work through your problems and show us how you did it, awesome job! 👍
I was watching an episode of “Dirt everyday”, where they had an 80’s something Chevy Army pickup truck with a 6.2 Detroit diesel in it. They brought it into the shop to sort some things out. Fred left it to his mechanics while he showed his viewers how to make a cup holder out of a bean bag! 🤪 He came back to the shop and the truck had been LS swapped!?!? Never watched another episode
It’s possible that you’ll be better served with the 2 1/2” pipes over 3”, Improved low end torque. Also, maybe consider adding a crossover pipe to stabilize flow and improve the odd fire sound.
I have 3 inch on my 454 sounds so good
@Dave Hancock Excellent observation. Back pressure increases low end torque. Less restrictive 3" pipes allow more top end power at the expense of low end torque. Torque equals pulling power. RPMs equals speed.
@@tomparker9966 that is an old wives tale. the gas velocity through the collector is the only thing that matters, having too large a collector will limit the scavenging effect leading to worse VE and less peak cylinder pressure.
That's not how it works
@@austindoud273 well not on a 2 stroke with an expansion chamber, but if we are talking about a 4 stroke.... yes it bloody well is.
I'm not trying to tell you what to do but while you're working on this vehicle and you're starting and stopping the engine and using the computer and things like that you may want to have a shutdown checklist so you shut down things in a certain order so that someone doesn't inadvertently disconnect the battery while you're still working on the computer so this problem doesn't happen. This way you put one person in charge when you stop the engine for whatever reason then that person can say stop this stop that and then you know what's going on that might be beneficial. I really do enjoy watching you guys work and the fact that you're making things run from what you have that's the important thing as you said you don't have brand new stuff that has everything's perfectly tuned, you got to make it work and that's an art that's being lost these days, just having to figure it out, but also that's the fun part.
I am all exited watching you tinker with that engine, used to have a concrete block factory some years ago, and enjoyed designing parts of the plant. Then today I just remembered that back in the late 60's (when I was a kid) my dad loved to tinker in his cars, unfortunately he also yelled at his children while we were helping. I just realized that I have a heart for mechanics, but thought I hated that, it was all dormant in my childhood. Thank you again Matt, you do a lot more than you realize.
It’s going to be a whole new channel when The Sand Beast makes its debut! Can’t wait! 😍🥰😘
I think there could be a Mountain Dew stuck in the fuel injector
that's a nice 5 cylinder you have there, my ears fully agreed with the cool tubes. 🤣
The motto i came up with way back when I worked for a certain remodeling company in Medfield Massachusetts was
" We know it's right because we've done it twice!".
We seemed to always have to go back and pull things apart because we were moving to fast and we would always forget things.
Matt I love how you appear to remain so cool & calm when things aren’t going so good.
Matt, you should consider doing a V-bands on the final exhaust. As much as you work on and as much as you remove parts to facilitate maintenance or repairs, a V-band is going to be much appreciated and make your life alot easier on removing the exhaust.
Dont forget to call LT TOLMAN to tune her man, hes right down the street.
Love those over-sized "glass packs!" What a hard working gaggle!
Keep after it . . . 😂
Great video Matt and crew.
Remiinds me when I took my 76 half ton 2 whl drive and made a 4x4 out of it and swapped out the old 350 eng. And installed a 95 LT one. Hung my head in silence many times but was worth it name it bits and pieces that was 25 years ago. Truck still running great not so much for my old body ( lol )be safe and enjoy life.
would love to learn more about the mechanical backgrounds and experience of this awesome crew
Loving this build👍🇦🇺
Thanks for showing us the phone IR camera mode. I can really use on my old Italian Motorcycle and Car upgrades/rehabs.
I agree with no stacks. Also away from the wheels. I'm a Road Ranger and those are always an issue with helping someone stuck on the highway.
woooot wooot woooot wrecker VIDEO
probably my most favorite series!
I really enjoyed this. Remind me of being 16 again with my first project project truck, a 79 F150. Trial and error, new parts, phone a friend and crossed wires.
One of the things I love about this channel is that you're not afraid to show and own mistakes.
I could watch this kinda stuff all day! Great seeing things coming together on this beast!
Someone needs to throw Dr Tune em All on a redeye flight to CO.
Oh, and Texas Speed need to build this beast a beastly torque monster of an engine.
This is ssssooooooooooooooooo much fun that we need to keep going !!!!!!!!!!!!! How about rebuilding an army tank next????
What a great crew here with no coat tail riders. Everyone puller their own weight.
Hi Matt from west Alabama
When it comes to Matt’s Crew
It’s nice to see Lizzy doing A lot if not Most of the Welding on your Rig. Glad to see a Woman taking on the Roll.
Uh oh, good to see Matt represent North Carolina by drinking the Cheerwine! Best soda ever!
5:12 Cheerwine is DELICIOUS. My favorite soda, kinda hard to find in Indiana but the closer you get to North Carolina where they’ve been based about as long as cokes been around it’s a lot easier to find
It’s kinda cool seeing you use those long cherry bombs on there. I did two long cherry bombs to a 3” in my Silverado and I was able to make a good cheap exhaust that didn’t have the terrible rasp most chevys have with the more expensive exhaust kits.
My first job was in a factory assembling pipe clamps like the one you're using on the exhaust. Assemble thousands of those in a day. Not too much fun.
Once you've had a very stressful, complex job that's always changing, and thousands of people depend on you, a job assembling something starts to sound pretty appealing. Lol
I think it’s so cool that company like Holley didn’t get stuck in the past with carburetors and is providing cutting edge technology to enable customizers to do what they want with modern fuel injection systems.
This wrecker is a BEAST.
Lets hear a story from Trevor on how he learned all his skills!!!
It’s good to see you and your crew sticking to it. Brings back memories for work I have done with my dad and by myself later.
Shop days are the best days! I Love seeing all the teamwork and accomplishments on the builds and repairs! Best Crew Ever! 🙌
A nice set of Engines would work well, balance the weight and double the juice! I'm all play you guys!!!
I am Happy to see Matt use his welding gloves, cancer is no Fun.
For sure, hand cancer is no fun....
Another hot tip from the safety police - LOL.
I love V12s, I6s, flat 4s & 6s, but there’s a part of me that says every IC engine should be a poorly silenced V8.
Great video guys. Love your work!!
Yeah for real. I did just buy a 6.0ltr 400hp m120 v12 for a vintage Mercedes restomod project and I can't wait to see what it sounds like with minimal muffling. It's real hard to beat the sound of a V8 at idle or 6000rpm + though. My little 200ish hp 4.5 V8 sounds so good screaming 6500rpm.
I could watch an hour of this each Sunday.
Love Rudy's channel, but miss seeing him on here doing recoveries. The recoveries you do are so great. Love watching this channel, been watching some we joined around 150,000 subscribers
It's so damn awesome seeing Lizzy weld. I'm OSHA certified in tig, mig and flux core. It's one of my proudest and biggest accomplishments. The industry needs more women welders. In my opinion women are better at it because we have a steadier hand but also the patience to do it. Having a dad or grandfather to teach you and have faith in you when the majority doesn't is everything. She's very blessed to have you Matt. You should be very proud.
Nice, love it when a plan comes together!! and it sounds good too.
Lol an O'Reilly's auto parts add played right after Trevor said the jingle.
THIS IS AWESOME, WE ARE THAT MUCH CLOSER TO SEEING THAT BEAST ON THE JOB!!