How To Build Diesel Engines In Automation!
Vložit
- čas přidán 6. 09. 2024
- The turbo revamp certainly helps a lot with this compared to the older game builds.
Enjoy!
#automation #diesel #powerstroke #automationgame #howto #v8 #forgottenmustard #tutorial - Hry
they need to add diesel engines into the game, and maybe rotaries and electric
hydrogen cars ?
@@paz5655 mercury motor
I agree on diesel and rotary but there isn't much to a electric motor to make it fun in this game
@@Wesleystewart78 it's interesting to compare an electric engines power curve to that of an internal combustion engine. High powered electric engines still have a problem maintaining torque with rpm, and with that, sustaining peak power which is usually the opposite of how a high powered internal combustion engine runs. It makes for a different driving experience.
Perhaps two stroke engines
Yeah the big thing there's gonna be the pipe
Impressive how you got it to be "peaky" like a turbo diesel. I would like to see a haul/tow test, sure!
(please no flashy rims or trashcans for exhaust tips lol)
Ford Guys... strange buncha dudes.
I own a ford lol.
That’s far from peaky, sorry dude. (At least if you’re counting the torque curve.)
Also something you can do to simulate diesels is to use the devmeth fuel so that you can max compression and timing, and have the leanest possible fuel mixture
Devmeth fuel?
@@ruusteriv aye
@@retoadyt3196 What is it?
@@ruusteriv its in the new update, its basically the equivalent of methanol fuel, 200 RON if im not wrong, i havent downloaded the LCV 4.2 so idk exactly
how do i access this?
All those new engine options is gonna add a whole new level to engine building in Automation.
How do you do that
Like, how do you update it like that, I don’t understand
@@g20hypercars12 switch to open beta
I just did a 1500 and 750 hp nitromethanol v8, reving at 3500 rpm. It's beatiful
@President_DJ_Trump I had a brain fart when writing
Definitely do a pull test!!
Since diesel functions so differently from the standard Otto cycle you should switch to the "Devmeth" to run lean and high compression.
the 6.7 specs is it has 16 valves. not 32(thats what a duramax has at the same displacement). the other point out it comes factory with a 67mm turbo(from the pictures i have seen). Its an over head valve much like the chevy LS. the big difference is the fact the turbo or exhaust comes out the same side of the head which is where the intake is
The 6.7 has 32 valves, conventional push rod, cam in block.
@@ForgottenMustard how the heck? thats copying duramax. nvm i stand corrected. although a youtuber by the name of JH diesel 4x4 has said they are 16 valves. not 32. and he has the older models from 2006
@@ForgottenMustard all my info is from JH diesel
JHs 2006 is a 6.0 not a 6.7
The 6.7 powerstroke wasn't released until 2011.
@@THESNAKE8 also the 16 valve diesel was the GMC 6.2
You should try to recreate the Peugeot 908 HDi 5.5 diesel V12. The Audi R10 diesel would be a great too, since it redlines at 5500 rpm
not that insane actually in the greater sceme of things, a Modified Mercedes Diesel will happily rev to 6 grand, Garden pulelr Tractors with TDI and HDI engines like to rev to 7 or even 8 grand, and high power Drag racign diesels are hitting 7000rpm as well, older diesels would rev to 5k or more all day anyday from factory.
@@aaaabababa Yes, but pulling to 5,500rpm, 50+ times a lap for 24 hours straight is why that number is significant.
@@Sephiroth5200 not really, no, the issue with RPM on a diesel isn't really wearing it out, it's that diesels just don't like to produce power at high RPM, it's not much more impressive than doing the same thing in a Non Diesel Car
@@aaaabababa You're going on about revs like it can just take it. If Audi or Peugeot could have run either of their V12s at a 7000 rpm full throttle redline under the load of a 200mph car for 3000 miles, they would have done it. That's my point. LeMans winning endurance diesel engines. Not tractor pull style engines.
@@Sephiroth5200 the issue is that 7000rpm on a diesel wouldn't have made sense in that application, because diesels don't make the best clean power at higher RPM's, but 5500rpm isn't all that special, even for a diesel in endurance racing.
Besides it sounds like a hair dryer 😂it sounds pretty epic.
Sounds like Subaru engine sound.
Pls do the pull test!!
And make like stage upgrades to make it super power full in the end(but within realistic numbers) :D :D
A pull test in BeamNG with this engine will be cool
hopefully someday they can add diesel fuel in the game
and i hope someday they can add rotaries, flat engines (a bit different than boxers), and the inline 8 tood
can we see maybe an small turbo diesel like an 1.6 hdi vs a 8.8 v8 na?
That might be what a powerstroke is able to do, but the way they're tuned is basically just no boost in the low end
If that’s a 2020 6..7 the exhaust abs intake are backwards
And the 6.7 is also an OHV not an SOHC...
We need single cylinder engines too
I'm trying to follow along with this guide but it gives me a twin turbo only option. Any one else have this issue?
You should try and make a Detroit diesel 15 series. From the new freightliners if possible.
454ci V8 dual carbureted with long tube headers vs a V6(60° if possible) 2.8 liter v6 TDI
Duramax Express van next with a 4 speed and 6spd auto would be cool.
Yes please. I love your videos.
No way you have this many engine options. How did you get them? I've never seen the compression map.
It’s a new update. You might need to be in the open beta, I can’t remember
Pulling test. Yes plz!
Hello
I think you have 8000 and 5000hp engine that build in automation
Please do pulling test with them and this one
Could you start releasing your engines?
What mods are You using?
I have automation and don't have all those extra engine options, is that a dlc, mod, or?
check out twinturbros video its called something like new automation uppdate and he will show you how to change into the beta uppdate
Build Diesel VR6 Engine
Bore: 105
stroke 135 mm
*the beta version bit has bugs. stats unavailable just black screen...*
Fun fact did you know the 6.7 power stroke is actually a pushrod engine
it can't be a pushrod with 32 valves !!!
Yes it is look it up
@@mudriper I was just being sarcastic
@@mudriper anyway the system on beamng won't allow OHV to be 4 valve engines
Finally, an OHC engine :)
(No offense)
Time to put it in a D series
What version of automation is that?
Compare a 7.3 power stroke(turbo obviously) and a 6.7 power stroke
Maybe now you should do a 3.0 I6 Duramax
Ever thought about trying to make an ecodiesel~? :3
That sounds evil 😳
can you do the 6.7L Cummins turbo diesel engine please
Definetly do a pull test
Where do you download all the extra fuels and stuff?
Can you publish or share these engines on Google drive, or one drive?
Pull test yes?
Hello, what is the name of this software? How can I have it and use it?
What is name of that program ?
Iam pretty sure a 6.7 isn’t a SOHC engine
When I launch automation the new engine options don't show up its just the old basic ones does anyone know how to fix this
Mabey you are in the main branche go to betas in steam and ho open beta
@@crispyshaman4937 ok thanks
Would like to see big block 454 or 8.1L Chevy vs 6.7 power stroke. I know it not fair tho
shouldn't diesels have high compression
yes, but in this game diesel is not added yet
@@FSXgta yes im aware of that , but what if he made it as a high compression engine would it work
@@celicaas95 it will just knock
game name
Do a test
What's the name of this app
Automation Game
Only available on PC though
sadly the powerstroke is an OHV engine. much like the chevy LS. if your gonna buld an accurate engine. build it exactly how it exists in the real world. i know these motors better than most
All engines nowadays are ohv, including this one in the game.
we're all aware, it's just that the game sucks. no option for 32 valve v8 ohv