Huge Single-Cylinder Diesel Tow Test! BeamNG. Drive
Vložit
- čas přidán 5. 07. 2024
- Forgotten sawmill engine somehow ends up powering an SUV!
Enjoy!
#beamngdrive #singlecylinder #towing #forgottenmustard #engineswap #sawmill #beamngdrivemods #beamng #diesel #stationaryengine #experiment #biggest - Hry
The mod is now public!
www.beamng.com/resources/single-cylinder-diesel-for-the-roamer.31427/
how do you get it to show up in the roamer series cuz for me the engine doesn't show
Have you tried installing it in manually via parts menu
The vibration in that Roamer must be insane
Unless it's very well-balanced
How do you balance a single cylinder?@@Gearz-365
@@ThingyGoos in s similar way you balance 3-cyls
@@ThingyGooslots of counterweight with a pair of counter rotating balance shafts
@@Gearz-365even if it is balanced the torque impulses will be felt through the drive train like the exhaust note.
Like a hit and miss without the miss.
Aye, It's almost got that ol fairbanks- morse twang to it.
So a hit.
This shit don't miss
@@RailsofForneyHit and
Hit or miss I guess they never miss
Salesman screaming over the engine: "You can hardly tell it's a diesel!"
In Germany we have a tractor with an engine like that, Lanz Bulldog, 1 Cylinder 10l of displacement,two stroke diesel.Common in 50/60s.
hot bulb tractors, yes. We see them often here. Quite a few clubs that restore them and do exhibitions. bang bang bang puff puff :D
I’m sure that thing be vibing when fired up with all that mass.
That thing can also do "0 RPM"
Same as Italian Landini...

That is not even a Diesel. It burns a lot of different liquids, as long as they are combustible.
reminder that diesels literally use compression of intake air to ignite the fuel as it's injected at TDC before the power stroke. it's knock-powered
a friend snickered and said to me " military diesels are weaponized knock.."😂 sounds about right
It sounds like a blown engine with spun bearings after throwing a rod and making a huge hole from the block! 😂
I know right? 😂 I can smell it through the screen
Check out the old Lanz Bulldog^^ The engine was pretty similar. 1 cylinder, 10l displacement. But it was a two stroke.
sounds surprisingly close to the real engine too
Sounds like a hot bulb like a Lanz Bulldog or something 😂
@@drew0035Blown engine or super old diesel? 😂
heavy flywheel needed
It's funny what a heavy flywheel will do. Our heaters have a little 2 cylinder diesel with a big flywheel and a blower wheel directly bolted to the fly wheel. They will run on 1 cylinder at like 100rpm until the other one catches, they refuse to stall lol
Now mount a cruise ship turbo on the trailer!
Might as well just throw a helicopter turboshaft engine on there while you're at it...
That sound came from Engine Simulator, I already know with how good it is…
It's impressive how... actually not-bad this is. Obviously the HP is lacking for higher speeds but that torque gets the damn job done
HP gets the job done. (Its the definition of power)
Torque is converted in the gearbox.
@@Coolgamer400 technically hp is just measuring how fast the work gets done. Torque is physically doing the work and it’s multiplied through gears/gearing.
@@johnwalker8193
power = work done per time. measured in W or hp(PS)
Torqe = force on a rotational axis, measured in Nm or lbft.
When i fully step on the pedals of my bicycle, i will apply roughly 200Nm of torque on the crank (0,2m x 1000N).
But no one will argue, that a motorbike with just 100Nm engine torque is stronger. When you gear it down to the revs of your legs on a bicycle, you get like 10 000Nm.
You can apply torque to an axis without even twisting it, then it will do no physical work at all.
Engine torque itself is irrelevant, especially if using gears/transmission.
Power is the only thing that gets your job done.
Think of wheeltorque as a function of engine power.
Do your math.
2 sides of the same coin. HP is rpm over torque, gives you hp. The more torque the less the engine has to work and rev.
@patrickg2577 cool gamer is right. But who am I? Just your friendly diesel engine engineer.
give this thing turbo
Or a centrifugal supercharger. Being a low rpm 1 cylinder I don't know how well it would spool up a turbo.
I tried it and it blowed up, even at 4 PSI of boost 💀
@@ampsbydan :(
Would be awesome
@@ampsbydan try 1psi boost
Oh yes a 12L 1cylinder that goes 2000rpm 😂
Don't understimate
what are the mounts made out of? how is that not idling like that one video of a volvo that looks like its sniffing
The engine mounts are the car's suspension in this case.
@@detaart I don't want to be inside that car when it's on the th-th-th-th-throoooottle. Sorry about the stutter there.
the mounts are made from hopes and dreams
Easy. No engine mounts needed
Polygons.
It sounds like someone twitchy tapping on a wood table
Awesome! That thing probably has like 35 hp @ 100 rpm and 76.4 gazillion ft-ib of torque. Actually the car isn't moving at all, it's just rotating the Earth underneath it's wheels!
She might have a slight knock.
Well, it IS a diesel.
That's not a bug. It's a feature.
Diesels are powered by knocks
T o r q u e
Dude, I don't know where you get the engine model and sounds from, but this one is freaking awesome. Pokpokpokpok awayy...
Thanks, glad you like it :). I made this mod. The engine model is actually a slice of the bus I6 and used Engine Sim for the sound.
@@ForgottenMustard Will this be downloadable?
@@ForgottenMustard I fckin love the sound! Thanks for putting the work in😄
@@thomasdt1991 www.beamng.com/resources/single-cylinder-diesel-for-the-roamer.31427/
@@ForgottenMustard Thank you so much!
You make the best mods ever!
Can you imagine how awe fuel that sound would be in real life!! The pulses would shake your rib cage.
I want to build it lol
I am so glad that Beam finally made the pulleys spin at a realistic-looking speed.
Was it not always like dis??
Nop @@tt-nm4yj
I've always wondered what a heel and toe downshift would sound like on a big hot bulb tractor. Now i know, and i'm not disappointed :D
It sounds like one of those springy door stoppers
She knockin!!!
Sounds like a 5.3 with a hole in the block, pulls like one too! Seriously cool though, did the sound come from Engine Simulator?
Yes.
That knock sound 💥
This is awesome, I'd love to see something like this in real life
Lanz buldog. German tractor. 10L one cylinder diesel.
Lanz Bulldog is your closest bet. They sound great. They can also technically idle at 0 rpm, by going back and forth. Not good for the engine, though.
Ohmygosh i absolutely live this, it sounds so nice! Almost sounds like a lister petter! Really neat! You should make a two cylinder version! Id love to see that!
It sounds cool if you hold down on the right of the screen for the 2x ffw lol
What literally any European country thinks American cars are like
Wrong, we thinks this is what eastern block cars are like and depending on how broken they are sometimes that belife is accurate.
The sound of that engine is so soothing I almost dozed off
Really fun sound ! I hope we can put themthe engine in-line like a rotary to create the Mazda 787b of funny sound
If you want something like that, Ibishu makes one hell of a 4 cylinder
Love that Lanz Bulldog sound!
this is one of the most creative mods ive seen for beamng this is sick
I'm always amazed at the sound modeling...that sounds just like a one-cylinder tractor, especially under load!
should add vibrations like crazy
Wow, it sounds just like a split manifold used on Dekotora trucks! This mod is called 'maniwari' (マニ割り) and it usually involves cutting up the stock manifold to seperate the first cylinder to give it its own pipe, and then both pipes go through their own aftermarket mufflers, and it makes a distinctive loud clapping like in the video.
Time for a train turbo. Lol
Why the fuck is this game so good and most game developers can't even make the sound right.
It's software and it behaves like a true old diesel engine.
Sounds like a 90’s video game with stuttering audio. Amazing.
*starts having fantasies about a turbocharged version of that thing*
Oh man listen to her purr
What a wonderful marvel of mechanical engineering she is
That needs a massive turbo!
This sounds exactly like a vibrating ruler over the edge of a desk
the sound is actually pretty close to what something like that would;d be other than some funky transitioning
The Mustard is back and it's as good as ever 👌👌👍👍
Alternative title: Diesel cargo boats HATE this one trick XD
How and why does it sound so good? I absolutely love the sound of it!
I love it. Like an American Lanz Bulldog.
Sounds like a semi using the jake brake
The world would be a better place if SUV'S and pickups sounded like that
at idle it sounds like an engine from ATG's engine simulator lmao
Sounds like every early 2000s Suburban with tinted windows roaming around downtown.
The fuel knock is really cool
love the sound of this motor
I've seen this mod!!! and now I know that it needs to be downloaded
In Indonesia, we have something similar called ledok, it's a small truck powered by a single cylinder industrial diesel engine
Sounds like an old Mercedes 240D my dad worked on once when I was a kid. And performs about the same.
still sounds better than a v6 🗣
why specifically a V6?
@@Theuz-xo3sr because beamng v6s sound horrible
@@god.mp4 yes
@@TsunamiX2 tbh I like the v6 better than the v8, the v8s in beam are some of the worst I've heard lmao. surprised we don't see more sound mods like the 'dirty' v8 sounds for the bluebuck/barstow
Girls love this SUV for the *cool vibrations*
We want a turbo!
The sound of that downshift @5:02
i wish this mod was released i wanna test out a lot of things
It will be released.
only sound tell me that this guy have that torque
It sounds like a woodpecker lol
The whole chassis could not support that engine, much less the engine bay and front axel. 😂
The kinck knacking noises makes me think how would it sound with two cylinders.
I have a diesel rally car with a ceramic clutch and single mass fly wheel. In IDLE it sounds exactly the same! 😂
Needs a Jake brake!! 😂😂
Best engine ever
Even when it sounds like it's about to stall, it's still pumping out 3-4k lbs of torque to the rear wheels ^^
If that thing was hard mounted it would be like hitting a pothole everytime that engine fired
It reminds me of one of those farm trucks they have in Thailand and Vietnam that have a single cylinder Kubota diesel.
LOL, it sounds like one of those 'China' diesels like they use on all the Thailand walk-behind tractors, all the way up to custom-built all terrain dump trucks. Pretty cool stuff, and pretty accurate sound and physics for a single cylinder 4 stroke diesel.😉
Who ever loaded the trailer knows what they were doing
Lile every person needs that one thing missing in their life, this engine needs a cruise ship turbo to make a lil more power 😂
This is a *super* interesting tow test, will we get to see other testing of this diesel thumper soon?
Yep. I will also supercharge it and do some pull tests.
I'm building a project like this. I watched it over again after the first. It reminds me of truck driving, so vividly. 300rpm idle with 1800rpm tapped out. Real amusing and downshift at 600. Power in an engine.
Sounds like one of those Scania trucks in the uk
Next time will be this but with a turbo?
Bro basically gave us a massive honda atv
the mpg is crazy
that one is the GOLLDDD!!!!!!!!
It sounds great I love diesel swaps I'm the person who if you gave a free Lamborghini and a diesel truck would swap the engines putting the diesel in the Lamborghini and the v12 in the truck
we don't need electric fancy vehicles ahahah
Sounds like a machine gun lol
This engine swap reminds me of if a mid 90's Ford Explorer by some miracle got engine swapped with a Lanz Bulldog two-stroke diesel engine or some other massive single cylinder diesel.
Edit: It is also funny that this engine only makes about 95 horsepower yet it makes 400+ ft lbs of torque.
The Evolution of Testa Calda 😅
Oh you met that putting the truck engine on the suv 4-door?
vibration : ah yes👍🏻
I love single cylinder!!!!!!!
Those engines seem to work best under load
Sounds like a jeepney in the Philippines, pretty cool
The jeepney just sounds like that because of the exhaust system
man made a lanz bulldog
4.3 MPG is insane
Goddamn mustard tiger
Weird looking walrus fuck
Awesome work. The only issue. The engine phases/glitches through the Roamer’s frame. Plus you CANNOT change out engine mounts, so you can’t change the way it goes straight through the frame! Other than that, it’s a pretty cool engine. Is there any way to fix this?
A John Deere 2 cylinder like from the B,R,60, and bigger models. That would be a great engine to use here.
Make a 24L twin piston engine
Harley-Davidson riders hate this one simple trick.
@@Stoney3K Yeah, imagine a 24L two cylinder engine on a motorcycle. It would be very large and heavy and wouldn't fit ideally at all.
144L v12
@@ryanl.1085 I wonder how it would be possible to fit that in the engine bay though.
@@fexploder3281 You'd need to design a whole new vehicle for it that would be like 90% engine lol