Prolly the chain is too tight or the belt drive is too loose. There could be debris to a good clean of both of those machinery parts. And make sure not to over tighten them could cause stress that leaves noises like that 👍
It’s either A belt tension is either to lose or to tight B Jackshaft bearings bad or C which I highly doubt cause the belt would just slip, or break knobs on belt worm down.
What is this issue my belt is loose enough but not to loose and sounds like it coming from jackshaft not rear wheel can someone help me with this problem
Yea I got this same problem, just ordered a new Jackshaft and titanium swingarm bolt. Haven’t torn it down yet, but based on all the videos, these are all what a damaged jackshaft sound like.
Nah, its still there. Jackshaft bearings are $18. Im going to tap a grease zerk into the jackshaft to see if it extends the life. While I'm in there im swapping the belt primary to a chain. With the squeaky dry belt after a year my bets are on the 212 chain drive being quieter in the long run.
@@krispewkrem3 have you tightened your swing arm? if you tightened it up and it stops only to return after a ride or 2 let me know. but more than likely its your main belt is to tight.
This js happened to me and same exact noise and all I did was tighten my swing arm and it went away hope this helps someone 🙏
Ether tighten your chain or the bearings need replacing because your chain was too tight
Tighten sprocket nut on motor or check your bearings in midshaft or back wheel
Tighten chain/belt
Geezus these comments show most of u dont own a surron and dont know a damn thing lmao
Facts aahhha thats insane the quantity of false information here
Mine had the same! chain was way too loose, tightened the chain and it went straight away
i used to have the same issue with my bike, but the noise went away when i changed my chain
It’s the belt it’s slipping get a new belt or get a chain
Prolly the chain is too tight or the belt drive is too loose. There could be debris to a good clean of both of those machinery parts. And make sure not to over tighten them could cause stress that leaves noises like that 👍
Sounds like chain may be too tight
How do u fix this problem???
Belt is loose
How do u fix this problem
Your belt broke
Mine has the same noise but I let go of the throttle and slow down
Can this brake your bike ?
I have a STACYC doing this
It’s either A belt tension is either to lose or to tight B Jackshaft bearings bad or C which I highly doubt cause the belt would just slip, or break knobs on belt worm down.
Could a worn down belt make that noise??
Make the chain tighter
My sur ron got the same noise, did you fixed already?
What is this issue my belt is loose enough but not to loose and sounds like it coming from jackshaft not rear wheel can someone help me with this problem
Hey I’m having the same problem and these comments are no help did you figure out the problem?
It's a bearing if it the wheel then it's the jackshaft I had same noise on my talaria went away when I changed wheel bearing
need a jew jack shaft
Yea I got this same problem, just ordered a new Jackshaft and titanium swingarm bolt. Haven’t torn it down yet, but based on all the videos, these are all what a damaged jackshaft sound like.
Ur belts stripped
I had the same noise i just loosing my belt and the noise is gone.
Hope this helps for you
Nah, its still there. Jackshaft bearings are $18. Im going to tap a grease zerk into the jackshaft to see if it extends the life. While I'm in there im swapping the belt primary to a chain. With the squeaky dry belt after a year my bets are on the 212 chain drive being quieter in the long run.
@@jasonstewart3748 i had the same problem i bought a chain conversion kit yesterday
jackshaft bearings
Loose belt
Did you fix it?
loosing the chain was working for me
i know what is causing this noise.
Chain too tight? Motor mount creaking? Mine does the same and I haven’t figured it out.
@@krispewkrem3 have you tightened your swing arm? if you tightened it up and it stops only to return after a ride or 2 let me know. but more than likely its your main belt is to tight.
@@krispewkrem3 belt to tight i had the same issue
If there's creaking when you mount and dismount just looked the bold to your rear suspension linkage
@@hamzahmushtaq877 mine creaks while mounting and dismounting, what is the fix for the problem ?
It’s the brake caliper hitting the spoke
How do u fix this problem