They are a great chair except for a few issues, can't run flat out ob a flat surface without it going into limp mode due to thermal overload i run mine at half speed to get around this issue even after getting a new speed controller. The next issue and it is a big one the track rollers are not fit for purpose. I run on similar terrain as shown on this video and a front track roller parted company with the bearing the plastic frets and became loose tearing out past the circlip causing it to throw a track . The machine is 14 months old and is lucky to have 200 kilometres on it and due to rain is lucky to have 40 hours on it since November last . I cannot move the machine it is just lucky it happened at home and not out on a track where it would be a life threatening thing . All the rollers that i can check are only holding on to the bearings through luck and a circlip . I am in Queensland Australia and warranty has been knocked back for a $60k aud machine this is not right at all . Some parts of the chair are pure genius other parts just cheap and nasty rubbish
Great presentation, Chad 👌
They are a great chair except for a few issues, can't run flat out ob a flat surface without it going into limp mode due to thermal overload i run mine at half speed to get around this issue even after getting a new speed controller. The next issue and it is a big one the track rollers are not fit for purpose. I run on similar terrain as shown on this video and a front track roller parted company with the bearing the plastic frets and became loose tearing out past the circlip causing it to throw a track . The machine is 14 months old and is lucky to have 200 kilometres on it and due to rain is lucky to have 40 hours on it since November last . I cannot move the machine it is just lucky it happened at home and not out on a track where it would be a life threatening thing . All the rollers that i can check are only holding on to the bearings through luck and a circlip . I am in Queensland Australia and warranty has been knocked back for a $60k aud machine this is not right at all . Some parts of the chair are pure genius other parts just cheap and nasty rubbish