Hi, yes, I bought a kit for the electrics, all the plugs were in the Audi loom so I just connected to them following the instructions that came with the kit. After that you need to go into the coding (I used a VCDS from Ross-Tech) - I had to activate the towhitch but I had several fault codes afterwards and had to recode 3 other items (I can't remember which).
Hello, I cannot find this bosal towhitch on the internet anywhere. Could you please post a link? Thank you very much. (I can find the Stealth version of this, but it does not have the extensions that go into the frame tubes.
Thank you so much..! And from where I can order exactly like this one hitch for my 2012 Audi A7 I looked everywhere Amazon, eBay and is very hard to find... 😒 Thank you for the video... 👍
Hi, I live in France so I bought mine from France attelage; this link shows several that fit but I bought the Bosal 050-333 (the site lists it as BOS050333UN at 277 Euro but transport costs might be high to send it to America as its very heavy) www.france-attelage.com/audi/audi-a7-sportback/a7-sportback-d-octobre-2010-a-mars-2018/561_a7-sportback-d-octobre-2010-a-mars-2018/I also ordered an electrics kit (faisceau in French). My A7 had all the connections ready to plug the faisceau in so it wasn't difficult to wire up but you do have to code it afterwards (I used a Ross-Tec Hex V2 to do it).
@@atlanticwind2186 quelle référence de faisceaux avez vous pris chez Franceat t elage svp ? je pense que vous avez pris un faisceaux dédié pour votre véhicule.. Merci par avance de votre réponse.
@@doand1257 Bonjour Doan, j'ai acheté le LEX993407. le montage est assez facile mais il faut programmer le calculateur par la suite - j'ai trouvé comment faire suivant les forums sur le net.
@@doand1257 Bonjour Doan, c'est effectivement le HexV2 que j'utilise. Le logiciel est à télécharger sur le site de Rosstech, actuellement il est à version 20,4 mais je fais les MAJ en fur et à mesure. J'utilise la version Anglaise car il y a des soucis de traduction dans la version française.
Thanks for taking time to make this video - did my towbar last weekend following your vid and was invaluable
Hi, yes, I bought a kit for the electrics, all the plugs were in the Audi loom so I just connected to them following the instructions that came with the kit. After that you need to go into the coding (I used a VCDS from Ross-Tech) - I had to activate the towhitch but I had several fault codes afterwards and had to recode 3 other items (I can't remember which).
Hi. Thanks for the video. Did you also install the electric parts?
How much can the car pull?
Hello, I cannot find this bosal towhitch on the internet anywhere. Could you please post a link? Thank you very much. (I can find the Stealth version of this, but it does not have the extensions that go into the frame tubes.
www.norauto.fr/p/attelage-col-de-cygne-demontable-sans-outils-bosal-050-333-868425.html
Hi, I added the link, Norauto have it in stock but Oscaro are showing zero stock. I bought mine from France attelage.
Thank you so much..! And from where I can order exactly like this one hitch for my 2012 Audi A7
I looked everywhere Amazon, eBay and is very hard to find... 😒
Thank you for the video... 👍
Hi, I live in France so I bought mine from France attelage; this link shows several that fit but I bought the Bosal 050-333 (the site lists it as BOS050333UN at 277 Euro but transport costs might be high to send it to America as its very heavy) www.france-attelage.com/audi/audi-a7-sportback/a7-sportback-d-octobre-2010-a-mars-2018/561_a7-sportback-d-octobre-2010-a-mars-2018/I also ordered an electrics kit (faisceau in French). My A7 had all the connections ready to plug the faisceau in so it wasn't difficult to wire up but you do have to code it afterwards (I used a Ross-Tec Hex V2 to do it).
@@atlanticwind2186 Bonjour, quelle version de VDCS utilisez vous avec le Hexv2 ? je dois en acheter un ...
@@atlanticwind2186 quelle référence de faisceaux avez vous pris chez Franceat t elage svp ? je pense que vous avez pris un faisceaux dédié pour votre véhicule.. Merci par avance de votre réponse.
@@doand1257 Bonjour Doan, j'ai acheté le LEX993407. le montage est assez facile mais il faut programmer le calculateur par la suite - j'ai trouvé comment faire suivant les forums sur le net.
@@doand1257 Bonjour Doan, c'est effectivement le HexV2 que j'utilise. Le logiciel est à télécharger sur le site de Rosstech, actuellement il est à version 20,4 mais je fais les MAJ en fur et à mesure. J'utilise la version Anglaise car il y a des soucis de traduction dans la version française.
What is the key size of 5:05 ?
Hi Kamil, it's a long time ago that I did the job so I'm not sure but it's a standard size, probably 13mm.
It's a 10mm but it's a bloody nightmare to get to it