Velikost videa: 1280 X 720853 X 480640 X 360
Zobrazit ovladače přehrávání
Automatické přehrávání
Přehrát
Thank you very much! Great video, good visuals!!
Thank you
Did you use an impact wrench to get the bolts off the back of the hub?
I used a long breaker bar.
What size socket did you use to remove the rear mounting bolts?
As I remeber it right, it was torx E14.
Thanks.
Im doing same job, im struggling to get disc iff the hub and ive damage one hub bolt with e14 socket. Any advice?
Gas torch.
@@the-senior-tech i loosened it off but couldnt get the bolts off completely so i cut them and replaced it
...and in your torque specs you talk about the 'wheel bolts' but you mean the wheel nuts setting correct?
Yes, you are right. Corrected.
were you able to access all the T14 bolts from the back with the same long extension? mine are really rusty and having a hard time.
Yes, but also I used the swivel head adapter.
Dobra robota 👍🏻,ale czy napewno glos lektora z amerykańskim akcentem to najlepszy pom🤔
@LukaszStruck-zn6tv At least you know what I mean ;-)
Thank you very much! Great video, good visuals!!
Thank you
Did you use an impact wrench to get the bolts off the back of the hub?
I used a long breaker bar.
What size socket did you use to remove the rear mounting bolts?
As I remeber it right, it was torx E14.
Thanks.
Thank you
Im doing same job, im struggling to get disc iff the hub and ive damage one hub bolt with e14 socket. Any advice?
Gas torch.
@@the-senior-tech i loosened it off but couldnt get the bolts off completely so i cut them and replaced it
...and in your torque specs you talk about the 'wheel bolts' but you mean the wheel nuts setting correct?
Yes, you are right. Corrected.
were you able to access all the T14 bolts from the back with the same long extension? mine are really rusty and having a hard time.
Yes, but also I used the swivel head adapter.
Dobra robota 👍🏻,ale czy napewno glos lektora z amerykańskim akcentem to najlepszy pom🤔
@LukaszStruck-zn6tv At least you know what I mean ;-)