Ultimate ESPHome DIY Smart Sensor | HLK-LD2450 ESPHOME
Vložit
- čas přidán 27. 06. 2024
- In this tutorial, we take our Beginner ESPHome Sensor to the next level 🌟, by adding a Light, Temperature, Humidity, and Pressure Sensor 🌞🌡️💧
FixtSE Web: fixtse.com/blog/ultimate-esph...
PCBWay Project: www.pcbway.com/project/sharep...
Save $5 on your first order using our link: pcbway.com/g/lHR6if
Affiliate Links:
ESP32 30 PIN Development Board
- Amazon: (3 pack) amzn.to/3V4J5Q2
- Aliexpress: (USB C / Micro USB) s.click.aliexpress.com/e/_DBI...
HLK-LD2450 mmWave Radar Sensor
- Amazon: (HLK-LD2450 Kit) amzn.to/4c9Oawp
- Aliexpress: (HLK-LD2450 Kit): s.click.aliexpress.com/e/_Dnl...
s.click.aliexpress.com/e/_DdP...
- BH1750 Light Sensor
- Amazon: (3 pack) amzn.to/3PyLRcE
(6 pack) amzn.to/3PxyLwh
- Aliexpress: s.click.aliexpress.com/e/_Dmp...
- AHT20 BMP280 Temperature Humidity and Pressure Sensor
- Amazon: (5 pack) amzn.to/3TMdRwa
(Individual) amzn.to/4adEijE
- Aliexpress: s.click.aliexpress.com/e/_DdQ...
- Dupont Cable
- Amazon: amzn.to/49VSQEr
- Aliexpress: s.click.aliexpress.com/e/_Ddv...
- Termoretractil Heat shrink tube
- Amazon: amzn.to/4a1l15n
- Aliexpress: s.click.aliexpress.com/e/_Deg...
- 00:00 Prerequisites
- 00:33 fixtSE DIY Sensor Case
- 01:29 How to wire it up
- 01:38 Multi Sensor Dupont Cable
- 03:27 Soldering BH1750 Sensor
- 04:20 Soldering AHT20 BMP280 Sensor
- 07:25 ESPHome Firmware
- 08:51 How to adjust the sensors value
If you like my work, please consider supporting me on Ko-fi! ☕🎉: ko-fi.com/fixtse
Patreon: / fixtse
You can find me on:
Web: fixtse.com/
Instagram: / fixtse
Hope this was useful and if you have any questions, write me a comment below
Thank you for watching (～￣▽￣)～ - Věda a technologie
Was watching your other video today and was wondering if this was possible. Thanks for making it so easy.
Glad I could help! 😁🙌
Sei una maledetto genio... Bravissimo ❤️❤️
If you are using a BME280 instead of the AHT20 BMP280 sensor (and you have the yaml) change the configuration like this:
1- Replace all bmp280 with bme280.
2- under sensor change plantform to bme280_ic and address 0x76:
sensor:
- platform: bme280_i2c
id: bme280_sensor
address: 0x76
I was waiting since a long time ago for this type of tuto, i command all devices instantanetly ! Thank a lot ! it's a really really great chanel, good job !!
Fantastic!. Excited to update your previous build with the new sensors to have The Ultimate smart sensor.
Love your work, would love to see a build using a 18650 battery
Hi, thank you!!! you made me remember that I needed to order some parts to be able to work on a battery powered sensor. I got an 18650 battery months ago for this, but always forgot to order the parts I'm missing.
Nice Video 👌 thx
The vision of your previous video led me to make a design with a ESP32-C3 Super Mini, a BME680 and a BLE repeater Thank you very much.
Fantastic! I just got some ESP32-C3 last week, can't wait to start playing with them too 🙌
Would you please, please share your yaml file? I have been trying for days to use bme680 vs bmp280. I think the BME680 is a far better sensor and fits my need !
This was a very easy to follow Video. Thank you. You did not talk about the MmWave calibration or settings. Does your setup have one distance setting for move and static or do you use all 8 settings?
Hi, yes the LD2450 sensor doesn't expose options for calibration (Like the aqara fp2), all configuration is based on the zone detection feature. No min or max distance, you just create a zone starting at your desired min distance and ending at your desired max distance.
I have a problem with yaml it's probably come from the ledc who use pin02. Am i the onlyone with this type of problem ? Do you have a support or something where i can found some help ?
Thank you. I am not very fond of wifi..what add on would you recommend or esp32 board poe network cable enabled?
To be honest, I haven't tried ESP32 boards with ethernet support yet, so I can't recommend them. I undestand why you might not like wifi, in some situations they are just not as reliable as a wired connection. I will look into it, but I really think that ESP32 boards with poe support seem like a very flexible base for any sensor you might want to build using ESPHome.
Look great, have installed it via your website with the install firmware esphome button. But i am unable to adopt the esphome and therefor not able to update the security updates for esphome. How to adopte the esp?
you'll need to buy the yaml file to be able to adopt it on the esphome dashboard, but don't worry, I'll update the firmware to the latest esphome version. I haven't seen any relevant improvements on the release notes so far regarthing the devices used on this particular sensor, that's why I haven't update it yet.
I already bought the yaml, but the yaml Version keeps rebooting
@@danieljansen1987 hey, I updated the binaries yesterday (right before they launched 2024.6 🤦) could you try using the installer from the post? (It would be weird, since is the same yaml but doesn't hurt to try).
Also, which version are you using? with Bluetooth tracker or without.
Thanks for this. I get this error when I try to remove the AHT10 sensor? Im using your membership yaml..... The error message you're encountering, "*** [.pioenvs/entrance/src/esphome/components/aht10/aht10.o] Source src/esphome/components/aht10/aht10.cpp' not found, needed by target .pioenvs/entrance/src/esphome/components/aht10/aht10.o'.", indicates a problem during the compilation process related to the AHT10 component. This might be happening for a few possible reasons:
Hi, Thank you so much for your support 🎉.
Try using the Clean Build Files options on the ESPHome Dashboard (it's inside the three dot menu of the device), and try again.
What is probably happening is that you added information for a new devices to an existing project. The esphome building process downloads and cache the drivers for the device using the yaml file the first time it runs. After that, to speed up the building process the driver download is skipped, as it assumes that it has all the drivers it needs from the first time it runned (on most cases, this is what you desire, when you are working on a devices with a specific set of sensors), so to get around this, using the Clean Build Files will reset the cache of the project and should trigger the download of the drivers the project needs. Let me know if that helps 🤞