Engine Breather (Oil/Air Separator) - ULpower 350is - Zenith 750 Cruzer Kit Plane Build

Now let's install the engine breather AKA oil/air separator. I'll also talk a bit about the permanent-magnet generator (not alternator) that is installed in the UL350is. Once again, the seemingly small jobs are often times the most time consuming.
🛠🧰🛠Tools We Use to Build Our Airplane (that you can get from Amazon)🛠🧰🛠
+ Rivet Gun amzn.to/2oZIpP5
(Be sure to use the custom heads from Zenith for the Zenith rivets!)
+ Gyroscopic Lithium Screwdriver amzn.to/2MnTqBI
+ Swivel Deburring Tool amzn.to/328LRWl
+ Edge Deburring Tool amzn.to/2Iyqy8I
+ 1/4” Drive Torque Wrench amzn.to/2VqcC5L
+ 3/8” Drive Torque Wrench amzn.to/2orWvIR
+ Orange Rubber Tool Tray amzn.to/2VrrlNL
+ Magnetic Parts Holder amzn.to/324M2Sw
+ Dental Picks amzn.to/30WJLax
+ Tap & Die Set amzn.to/2AQRcFE
+ Deburring Wheel for Drill amzn.to/2VqELtJ
+ Fluting Pliers amzn.to/2OvhGV6
+ 1/8” (copper) Clecos amzn.to/2LXrcyz
+ 5/32” (black) Clecos amzn.to/30ZnGYW
+ 3/16” (gold) Clecos amzn.to/2Oyd1lk
+ Right-Angle Drill Attachment amzn.to/30Wp1zy
+ 300mm Metric/Standard Ruler amzn.to/35ec2wt
+ Vise-Grip Pliers amzn.to/2OtQciz
+ Round File amzn.to/32aMvlO
+ Flat File amzn.to/2VvdDJV
(By the way, I'm supposed to let you know that these are affiliate links. So if you make a purchase using these links, I will make a small commission (but at no extra cost to you 👍))
DISCLAIMER
This video is intended for informational purposes only, and may include information that is inaccurate or not applicable to any other situation. Use any information at your own risk. The individual views and opinions expressed here are solely those of the individual. Always follow manufacturer recommendations and FAA regulations and best practices.
#JeffAndAdamBuildaZenith #builditflyit #zenith750cruzer

[@robbilbrey9893]

What is the name brand of the oil breather? Any info on where to get it would be greatly appreciated. TY

[@littlewingpsc27]

Zenith doesn't give you any kind of component placement diagram for the engine accessory parts showing where they should mount based on the firewall forward kit you bought?

[@ctsteve1967]

how much did the Engine Cost? Seems like the oil cooler would come with the engine and all required parts to mount the engine ready to start and fly.