How to install a Big Brake Kit on an F80 M3 | AP Racing
Vložit
- čas přidán 20. 08. 2021
- Here's a link to the product we installed today:
www.kiesmotorsports.com/searc...
Online Service Manuals for almost ANY car: bit.ly/emanualonline
Here are some helpful tools: www.amazon.com/shop/kiesmotor...
-----
Hey Everyone,
In today's video, we’re going to show you how to install an AP Racing Big Brake Kit on an F80 M3. If you're interested in this AP Racing kit and want to know if it's right for your car, check out our video linked below where we go into more detail about big brake kit upgrades,
• Do you REALLY need a B...
See the links at the top for the products we installed, in addition to links for some helpful tools!
Shop for car parts @ www.KiesMotorsports.com
Email us for questions on Products & Services @ Info@KiesMotorsports.com
Follow us on Instagram to see what we're building @kiesmotorsports
Follow us on Facebook @ / kiesmotorsports
See the tools we recommend: www.amazon.com/shop/kiesmotor...
Here's a link to the lift we use: amzn.to/3gWo97s
Special Discounts:
Use code KIES8 @ Tirebuyer.com to get 8% your tire purchase!
Thanks for watching and please try everything at your own risk.
Bryan
Kies Motorsports is an Authorized Dealer of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Kratos Turbos, FTP, Variant Wheels, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
This description may contain affiliate links. By purchasing a product through an affiliate link, you'll get the exact same price and Kies Motorsports may earn a small commission. By purchasing products through affiliate links, you're helping make this channel possible and we want to thank you for your support! - Auta a dopravní prostředky
Very Very Nice Video on Brake Kit Install.
Couple of tips:
For the rusty hub areas, after you clean with a wire welders brush, take a makeup sponge and apply a few drops of gun oil to the sponge and go over the areas that rust. Next time it should be clean.
Always inspect the rubber gasket in the Motive cap to reservoir fitting for cracks. And inspect the line to tank fitting. If there is even the smallest crack, it will leak fluid under pressure and there will be fluid everywhere. Place a beach towel over the area where the Motive Tank and the Motive line sits.
Have a small mister bottle filled with clean water handy along with thin cotton shop towels, in case there are Fluid sprays or drips. you can just mist the water on any painted surface hit by brake fluid areas and wipe clean. I also always mist the finished caliper bleed area with water and wipe with a clean cotton towel. Then with a clean shop towel, apply a light coat of simple green on the caliper. This light slick coat of soap will deter future brake dust build up.
This video came in super handy as I plan my kit ughm ughm
My 340i sure could use those old F80 calipers! I could pick them up I'm local! lol
Brilliant video bro. Thank you.
The best job man 🙏👍
Great upgrade and video 💯💯💯
Excellent video as usual.
That kit is AMAZING man.. just WOW! Well done!!
Great content 👍
Great video! Now I want to do this to my F80!
Great video guys, clear and concise with excellent lighting and video quality. Thanks for taking the time to share. Cheers Andy
I think this brake kit can stop even Time . Thank you guys ✌️
Wooo! The vid is up, I don't feel so bad for commenting on your Instagram post from a couple of days ago!!! :D
Fantástico !!! 👏👏👏
Awesome video 🇧🇷🇧🇷🇧🇷👏🏻👏🏻👏🏻👏🏻
Great work dude! Just got an f80 and this is pure gold. 🔥
Highly underrated car.
Great video. Awesome tattoo 😁👌🏻
good
For everyone seeing this. I use the brake valve rubber stopper cap to stop the fluid from dripping and allowing air to get into the fluid lines connected to the car.
Replacing Brembo for AP Racing hmm interested in a follow up video showing track day comparison
Brembo makes AP Racing
@@KiesMotorsports oh now I understand. Thanks. I just ordered the f8x bbk upgrade for e90 m3 for occasional track duty couple days a year. I hope they can perform. I see your AP and also Stoptech and wonder if I am making a good investment?
@@KiesMotorsportsBrembo really *doesn't* make AP Racing.
Granted, Brembo now owns AP but they still very much function as separate companies.
No hate on either, they both make some great stuff. I've had AP kit on my cars for years. If you visit them in Coventry you'll see some incredible stuff being made there - I was lucky enough to meet a few of their engineers when they used my car to develop a kit for retail.
Nice video, what make and model is that small digital torque wrench????
Just put the larger M-performance ones on, the M2C upgrade, 6piston front/4 rear, use the steel discs not ceramics 400 mm discs front, 380mm discs rear…. Including the brake shields, pads etc £7500👌
This kit in weight is actually lighter than the standard brakes before anyone says anything about weight!
the disc in the front is the same exact size as stock but till good
Does it have dust sealing for street use ? I have a cheap K - Sport BB kit on my Miata, was the only set availiable with the dust sealing and street legal in Germany. Works well so far since 2016.
Great video. Thanks
Anybody who decides to do this...please think about re-homing the M brakes over here! My 328 could use some !!!
Thanks for the link on the brake kit
But all together for 4 it would be the same amount my car cost 😂
do you need to remove the caliper and rotor to remove/replace dust shield?
I have the standard Bosch system on my f36, would I be able to install m sport callipers?
Did you have to bleed them with INPA? Cheers
Love these how to videos. Give me ideas for my f80 once I've sorted out my tte740 turbos. Thanks. 👍🏽
Could someone use an air vacuum bleeder instead?
@14:46 That's what she said
Does this also fit on a 440i?
question please help! I bought my car with these brakes already installed and in my state the car needs to pass inspection to be able to get tags and tittle. it failed inspection because of the brake because they could find what was the discard thickness on the rotors. I went of their website and it doesn't say anywhere. do you happen to know this info?
the "discard thickness" is the thickness at which the rotor should be replaced.
if you can help I would really appreciate it!
does it also work on f82 m4?
Can u do this on a e92?
Whoever thought a video about changing brakes could be so mesmerisingly relaxing.
Brilliant!
I looked hard at that kit but hard to justify $4k to upgrade already great brakes.
how much it cost , thanks
23:16 - Are you sure you didn't mean 5mm?
Update: You're right, it is 6mm on the rear as opposed to 5mm on the front.
What torque wrench is that you're using?
Summit tools
The man started this brake job with a 2x4
Setup looks great! But what's wrong with the stock setup? It is already a big improvement over the previous generation E90/92 M3 with the sliding calipers.
Also with the AP Racing setup, it is really necessary to have such large diameter (i.e. heavy) rear rotors, seeing as most of the stopping power would come from the front?
I don’t think you have to worry about that, I’m pretty sure that AP racing’s engineers have thought of that 😉
How can you cut the cover? 😂🤦🏻
really miss the old intro :(
I don’t think it’s necessary