LONGER LK5 PRO HAS A NEW COOLER - 3D Printer Review
Vložit
- čas přidán 17. 03. 2022
- #LONGER3D #LK5PRO #PCBWAY
PCBWay: www.pcbway.com/
LK5PRO$20OFF (-$20) - s.zbanx.com/r/urIoBxUuWfls
This is the Longer LK5 Pro 3D Printer. It is a pretty big printer that has a build volume of 300*300*400. Longer seems to have made some changes! Do these changes make the prints better?
Affiliate link to purchase the LK5 Pro -
s.zbanx.com/r/urIoBxUuWfls
Longer LK5 Pro details -
【90% Pre-assembled with Stable Triangular Structure】LONGER LK5 Pro is a large affordable 3d printer with 90% Pre-assembled, printing size of 300*300*400mm; With dual inlinced rods to hold z axis as a steady triangular structure for better quality of 3d printing. And it's 90% preassembly in factory before delivery, which will be easier to assemble together and save more time.
【Quiet Printing and Open source】The LK5 PRO is integrated with 3kits of TMC2208 chipsets for X / Y / Z axis for quiet printing, of which will be reduced less nosie from motor. Developed with open sources mainboard for LK5 PRO, it will be easier for you to add an optional spare parts onto the 3d printer, such as BLTouch for auto levelling or upgrade with Marlin 2.X version for beta test.
【4.3inch Full Color Touch Screen】 This fdm 3d printer is built with 4.3inch full-color touch screen and integrated with better friendly user interface for better interaction with printer, simple operation and easy approach to check the printing process.
【Upgraded Glass Bed Equipped】This fdm 3d printer is equipped with an upgrade ceramic coating glass for easly peel off from the bed when the printing is finished.
【High-temperature Resistant Teflon Tube】The LK5 Pro is equipped with a high temperature resistance teflon tube to stand up to 280℃, and it's not easy to clogging inside the nozzle and will provide constant quality of printing.
Polymaker FIlament -
polymaker.com/
Clockspring 3D -
clockspring3d.com/
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5 #3DPrinter #3DPrinting #longerlk5pro #longer3dprinter #LK5PRO - Věda a technologie
Nice solid review! That was one ugly hotend assembly 😂😂. You are right it won’t win a beauty contest. Out of all the reviews, you got the best prints with the old hotend assembly. The new hotend assembly did improve what were pretty nice prints already. That has to be one of the nicest benchys I have seen out of the box! Well done 👍
Great review - shows how much part cooling matters. Great job showing Clocksprings work, impressive
Thanks David! Yep! A good part cooler does matter. I love Clockspring designs 👍
Very nice review on the Printer this printer is actually my first one, bought it 6 months ago i only wished i waited for those dual fan but oh well.
in 2023 they did the update to the blowers... I just ordered mine from Newegg... was on sale refurbished from and shipped by LONGER 179.99 :)
Nice review Tripods!
Anybody else think this guy sounds like James Woods? Lol. Great review man thank you you've helped me with my purchase.
Thanks for the compliment! I really like James Woods, think he is a great actor and person! Thanks for watching and commenting 👍
Beautiful vase... thank you for the upload!
How long did it take and how can I download one? Thanks!!
That one-sided part cooling fan reminded me of my Ultimaker Original kit I bought in 2013! You would think in this time, dual fans / ducted on each side would be the norm! Looks like the upgrade does a great job
Thank you Sir
I've had this addon for a while now, but haven't bothered to put it on., I didn't think it'd make too much of a difference, they sent it to me by mistake.
Great videos does any of this work with a 4.6 mm nozzle? How can we make this work, especially when working with PETG ??
I'm having issues with my printer it usually always layer shifts at a certain height. I've tried slower print speed and jerk control and it's still bad.
Hi I have a Longer LK5 Pro I cannot do the set up as there is no movement on the Y axis . Have you any thoughts to help me .
In spiral mode, the print head pauses twice on each pass. 180 degrees from the other. It's causing blobs and two very ugly seam lines. Any idea what's causing this? I have an Elegoo Neptune 2s and haven't run into this issue with it. Scratching my head here.
Hey - I just got this printer and I am interested in the tube coupler clips you used... can you point me in the direction of which ones they are and where you got them? Thanks!
I had some spares. They can be found on Amazon - amzn.to/3F2ZjAR
Bought the Longer LK5 Pro 3d printer and it didn't work right out of the box. The Z axis would only go up but not down, wouldn't home and was doing strange things. So, I contacted Longer support to find out that my printer had a bad motherboard. Then they told me they would ship me a new motherboard and to fix it myself. I guess they got the name LONGER for it want work long but takes longer to get it fixed. I wouldn't trust anything with the brand name Longer on it. I have three other 3d printers from three different manufactures and have had no issues. Again, I wouldn't trust anything with the brand name Longer on it.
Hey Mr. TRIPOD, would you recommend the Longer 5 over the Elegoo 3 plus? The Elegoo isn't available right now. Or is it better to just wait?
I would wait the Elegoo, it is a much better machine.
@@TripodsGarage Thank you!!!!
File for Dino skull?
I am new to 3D printers. Just set up my LK5 PRO. First print was the whistle on their card. Came out fine......ever since I have major problem with part staying adhered to plate. Have cleaned plate with IPA and dish soap. Have tried various temps and rates. Can't even duplicate results from first print with same settings. Have tried glue stick and hair spray
Have you tried to tram (level) the bed? Are you getting a good 1st layer?
I'm a noob and just shopping printers.... if you don't mind me asking, how long did that T-rex take to print, and how much filament did it use?
Greetings! The T-Rex took just over 3 days, and a 1/3 of a spool.
Lol literally 3 days of machine running?
Be advised that if you have purchase and receive a defective unit Longer has no customer support. I called and emailed after purchasing one of their units do to it having issues and not feeding any filament and PLA, TPU, PTGE and they will not respond. Furthermore they blocked my number from calling them as now it goes directly to voicemail but when I restrict my caller ID the phone rings before being directed to voicemail. I would avoid this company all together and picking an alternative option..
I rebuilt my Longer LK5 with the mainboard and major components from an Ender 3 v2 and it now works like it should have from the start. Great frame. Terrible printer otherwise.
What's that annoying sound very distracting
What sound?
Ridiculous printer
It is no beauty queen. However, it printed ridiculously well