Valve stem tire repair
Vložit
- čas přidán 11. 09. 2024
- Folks, doing a little labor in your garage you will save thousands of dollars. The mystery of working on a tire is not a mystery just start messing around with it and it’ll come to you ,little tricks of the trade. If you’d like more information on working on tires please let us know in the comments. Don’t forget about our giveaway as well. Happy trails
Luke
I changed a stem valve in the most improvised way possible. I used a 4x4 piece of wood to put on the edge of the tyre. Then I used my Jeep to run over the 4x4 piece off wood to push down the tyre and break the bead. I then took the valve stem and lubricated it with bar and chain oil and pulled it through the hole with a padded pair of pliers. Using bar and chain oil again, I lubricated the edge of the tyre and started inflating it until the bead was set. I know, it sounds very loser, and very improvised. But it worked.
That tool is a 'fishing tool' most commonly bought and used for pulling the valve on a tube into place after installing the tire on wheel.
Thanks, Luke. You are right. I need to learn how to do a multitude of things if I wish to own any vehicle. No more whining. Only learning will save me.
Life is a constant struggle, and working around those struggles with perseverance. We’re all learning different stages. Very glad the video help you Dawa.
Happy trails and may all your tire stay inflated.
Luke
I can't put air in my wheelbarrow tire. I searched for a DIY video and glad I watched yours. Will go now to look for snake.
Loved seeing the starter fluid, folks, don't try this at home trick. I'd heard about it before!
Thank you!!
+Pita M
Glad the video helped. I had a friend do the starter fluid trick, I showed him a number of years ago. Well to say the least it burned his face his eyebrows hair and eyelashes, really got them good. I dedicated the video to him.
Thanks for dropping by and saying I sure appreciate hearing from you. Stay in touch.
Happy trails
Luke
I've seen people use the ether trick for seating the beads. Now that I don't work a service truck and have Murphy's Oil Soap handy, I use dawn and with very little coaxing on most tires the beads catch and seat.
More good stuff! If you don’t have starter fluid or you haven’t paid your life insurance premium, a solution of dish washing soap (you pick the fragrance) will help seal a tire bead too. To make the valve stem go on easier, I’d spit on it.
+Buddy NeSmith
You’re absolutely correct, it does work. Thanks for stopping and saying hi, your comments and support really does help.
Happy trails
Luke
2:25, thanks for showing this tool. I had no idea of its existence; but, now I can make one. What a concept.
You are very welcome Gary. I’m glad the video helped.
In Australia when we go 4x4 driving. Keep BO spray ( deodorant spray ) light it up as you did. Keep the videos going please.
Learned many things today, the snake tool is a must and what you did with the fire was some next level mechanic shit lol!
Always use lube. On both the stem and the bead. Cut the stem on the outside where you can see, then push it through the rim. Or skip the knife all together and grab the stem with a vise grip and tear the stem in half. Then push the remainder through the rim.
Great video. Also a safer way to set a bead on a tire is run a good line of grease around the bead and run a wrachet strap around the tire good and tight. Works more times then not and it's alot safer. God bless.
+jesse sherman
You’re absolutely correct I have a video on that. Works very good just a little slower.
Thanks Jessie for stopping in and saying hi. It sure helps our channel out. Happy trails
Luke
Not all valve stems are created equal!
All the epdm "pull in" versions are only rated for 65psi. If you have a tire that needs more than that, you should get a "bolt-in" version rated for that tire pressure. You can also get an air-pressure valve that is full port that will allow enough air through to seat that bead without having to resort to using flammable vapors. Just some thoughts! ;)
I just subscribed. What a wealth of info laced with common sense and practicality. The tire stem tool is pretty dang cool too. Thank you!!!
Sure glad to have you onboard. Thank you for the kind words. Always good to hear from you folks, and if you have advice please let us know. If you agree or disagree would like to hear that and if you have ideas for future shows let us know that too.
Thanks for watching
Luke
Your comment made my day, I will subscribe. Thank you, again. GOD BLESS. YOU ARE A BREATH OF FRESH AIR.
Thank you. Please keep in touch. We always like to hear from good people, your opinions and views are appreciated.
Happy trails
Luke
OMG!!! I love this man . real men are so great . I hope you are cherished .
Thank you, I hope I am real. 😉
oh man that toolis GODLY. i need someone with these. damn.
I've always used the 4-way style valve stem tool but I like that snake tool. Works better for getting the valve stem started in the hole. Thanks for sharing.
+mjmcomputers
You’ll love it, let me know if you get one.
MJM’s Workshop how to repair a sender VoLTE stem
I bought a big box of valve stem caps and have never regretted it. They're always getting lost and misplaced and I bought a box of several hundred for under 10 bucks online. A little internet shopping can also get you cores and stems very inexpensively.
+captainquint
Funny how a person uses them up. Good to hear from you again
I too want to buy Pl. Guide
I will have to buy that snake tool now. Thanks for sharing
+acet7
Let me know how it works for you. It works great for me. Luke
So, I just got weed torch. I have starting fluid. You know I am gonna fire the tire if I can't get the bead to seal!! I mean, why did you show us when you know some of us idiots are gonna do it anyway...hahahaha. Thank you. Good vid. I got this.
Instead of Plan B you can also put a ratchet strap around the tire. It squeezes the tire tight to the rim. Then just hit it with some air and you will see and hear the bead seat. It doesn't take much air. Then take off the strap and finish blowing up the tire. PLAN B works very well too.
You’re absolutely right and it does work good, just a little slower. Here’s a video I did some time ago using the ratchet strap. Hope you enjoy and thanks for your input. If you subscribe or have please let me know. czcams.com/video/HGiNwt_965A/video.html
Happy trails
Luke
Back to the Basics 101 .....good vids....yeah I subscribed.
Thank you & keep in touch, remember we’re having our giveaway. How you qualify is leaving comments and the thumbs up button. We draw a name every two months. Good luck.
Luke
I hadn't seen that handy little tool before.
+Someone Somewhere
It’s a lifesaver. Sure appreciate all your support. Always good to hear from you.
Love the flag flying at the end of the video
+justin bates our first flag we flew in the battle. It was true then that it still true today. Thanks for stopping in and saying hi Justin. It’s helping our channel big time thanks for being a part of it.
Luke
Sign of DOMESTIC TERRORISTS!
Actually, plan B would be to put a ratchet strap around the tire, which would probably get it. But starter fluid is more fun!
Starter fluid trick is awesome.
"plan B don't try this at home"
been there done that!😂
+Mark Yoder 🤣😬
very helpful video.
I always have to use plan b so you're not alone in that game
+fritz bushwacker 🤣
That's good, unless you have ripped the stem off your front tractor tire tube, oh well at least it's not the rear!
+Chad Rhode
🤦♂️🤠
when you shared the verse i immediately thought for the mounting of the spare 2 john 1:8 or 1Th 5:21 might have been good as well
Thank you Mr Luke
Hello handsome. More videos please.
Out Standing.!!!
OMG!! Just discovered the tire on my new travel trailer is flat. Filled it up but could hear it was losing air. It seems the rubber on the valve stem has cracked and allowing air to escape. Bought the trailer several years ago but circumstances prevented me from taking the trailer home. And as I am new to this, did not know that when you store a trailer over time, the tires should be covered. And was not told by the business that I bought and stored the trailer at that this could be a problem. In fact, almost thought that my new tires had been replaced with old used tires by some sly devil. Definitely look like they have many km on them but I did look online and learned that remaining stationary for any length of time is hard on tires. But this combined with my missing battery, wheel chocks, etc still makes me wonder. But I digress. Am on my own and my trailer is trapped in the back yard. Is there any other way to,fix the cracked rubber stem?
Just put new ones in. Really not a way to repair old ones and they’re so cheap. The learning curve on little things is sometimes a big deal. That’s why I made this channel, when I look back over the years of how I learned a lot of the things I know it cost me a lot of money to figure it out. Of course I’m still learning, but figured I might as well share what I know with other people, so it doesn’t have to cost them that much.
May your tires always stay inflated.
Luke
Thank You!
You are very welcome, we live in a day and age where most people don’t say thank you. I have observed people taking soda food water from waiters and waitresses without even making eye contact. Very rude. It says something that you would drop by and say thank you. Good to hear from you, please keep in contact. Did you subscribed let me know if you have. May the Lord guide and keep you.
Happy trails
Luke
Why did you need to take the valve stem core out first?
+COMB0RICO
It was all cracked up, and was leaking. I haven’t forgotten about that Bible study yet. Will do it.
Heh. You've got a good memory. We don't need to though. I left that voicemail arguing my point. But if you just want to talk Bible sometime, I'd look forward to that.
What do you call this tool?
I call it a valve snake.
When a Farmer about that #StretchTireLyfe.
+Benjamin Franklyn
? I’m sorry I don’t know what you’re talking about ?🤷🏻♂️
I have one of those cables
Here is a way to fix a valve stem leak yourself without taking the tire off: czcams.com/video/WGFSZ8J0YXo/video.html
X7. ? Meaning ?
I was wondering the same thing... ranch brand??
+Mark Yoder
Yes our brand is the rocking X7.
Fishing tool
Cool thank you, I never knew what the thingamajig was called. I do know it is the handiest doodad for putting in valve stems.
Happy trails
Luke
👋👍👌
+Douglas Jobe
👍🏼
just making simple things apear really difficult cause you dont know much
Thanks friend. With an attitude like yours I don’t think you have too many friends. No wonder why you lash out at people you don’t know on the Internet with horribly rude comments.
I pity you.
Sincerely
Luke
How did you pop the bead ....sheesh duh
I think there’s close to 300,000 videos on CZcams on how to pop the bead, this video is not how to pop a bead it was how to change the valve stem. You’re welcome for the free video that I made to help you that I am not really getting paid for. You have a great attitude. Not so much actually.
What ahhh waste
F A I L
HELL-of-a-lot EASIER IF YA DON'T BREAK THE TIRE BEAD !!!!
(which ya neglicted to SHOW !)
W A Y, BETTER METHODS!
17 frustrated hours later to get bead off!
I have shows on how to take a tire off of a bead. Probably could’ve done better, but if you make a show I would be glad to watch it and learn from the master. 😉
It’s easy to criticize somebody else for not being perfect but then if you don’t try it all that’s kind a like a Sunday night quarterback.
Happy trails
Luke