DECKED 101 | CargoGlide
Vložit
- čas přidán 26. 09. 2022
- The DECKED CargoGlide truck bed sliding tray is a sliding tool box that makes loading, unloading and accessing your tools and gear easy, safe and fast. Never climb into the bed of your truck to retrieve your gear ever again.
The tray rolls on heavy-duty bearings actuated by a single-handed latch which allows you to smoothly slide out and retrieve your tools and materials.
#DECKEDUSA #WorkSmarterPlayHarder #MadeInAmerica
Shop the DECKED at decked.com/
Check it out online at decked.com/cargoglide
SUBSCRIBE: / deckedvideo
Instagram: / deckedusa
Facebook: / decked.usa
Learn more about DECKED at DECKED.com: decked.com/ - Auta a dopravní prostředky
Just want the manufacturer to know, your draw system was crucial in an accident I was involved in.
I bought a 2022 Jeep Gladiator Mojave edition that had your two draw system in the back.
I used this everyday for work. It was absolutely fantastic.
Then on Christmas Eve 2023 I was involved with a rear end collision.
The vehicle that hit me was so badly damaged that the jaws of life were needed to extract the driver.
My vehicle, although totaled was completely intact thanks to the toolbox system.
Instead of crumpling the bed of the vehicle, the toolbox took the complete impact and saved me from being trapped inside the vehicle.
My plan is to add both the tool box and slide into my new vehicle asap.
Although I was hurt in the accident, every first responder commented on the fact the tool box saved me in this particular incident.
This legit is the best idea ever, I was just imagining this and telling my wife. Basically a sliding drawer just like the ones we put our clothes in in our house and in the kitchen putting all our spoons forks etc. put this same idea in a Jeep Grand Cherokee. Drill whatever you have to drill do any modifications that you gotta do to make it work but this can be done to any vehicle. Even if it’s on springs and it goes in a car trunk. Like the drawers inside the top of tool boxes, two go in the top and they both jump out basically the right side goes up and out and the left side goes up and to the left.
👊💥👊
I think adding an inch or two to the width would be a great improvement, so a sheet of plywood will fit without binding to the sides. Other than that, looks like a great product.
🫡
Very cool. As a documentary filmmaker, this is perfect solution for camera/film gear.I will be buying one of these for the Nissan Frontier I will be buying sometime in '23. Good work guys!
💥👊💥
I am a still shooter and filmmaker and have been considering this system as well along with some sort of roof-height cargo cover.
Bought a decked drawer for my work truck been using it years and love it. Just bought a new truck and ordered the drawer system with the cargo glide. Looking forward to never crawling into the back of my f-250 again. Even with the man step it sucks.
Thanks for the love! Shoot us some photos once she's all set up!
@@Decked Will do! If you happen to see it being shipped it’s headed to Moretown VT send a couple stickers with it!
This is a beautiful design, my only concern is the total bed volume loss because of how much space this takes up. A lower profile would mean more cargo space. This would work extremely well if you’re an owner with a topper/shell that way you get more space up ⬆️. I still like this a lot though. Especially for being able to load a bunch of firewood on it.
What you lose in bed depth, you gain in organized storage under the deck. You can haul just about anything you used to with the ability to ratchet strap items down on top of the Deck. Which has a 2,000 lb payload!
@@Decked I think he means just on the glide install. Seeing how high it sits. Though maybe a person could buy the 1000lbs/70% version then they would get the lower profile and lose a lot less height in the bed.
@Decked I want that 100% 2,200lbs cargo payload version but for that pricetag of $2,999,99(cargoglide)+$135.00(high extention)+$25.00(tie-down)+tax+shipping and installation cost $ at a certified shop... I am not sure about the durability or longevity or etc... of the "marine grade plywood". Offer a no hassle limited lifetime warranty for original purchaser and I'm in.
We do offer a lifetime warranty, for the original purchaser! If you're unsure about the quality, just shoot us an email! We can break everything down for ya'! Service@DECKED.com!
I used to weld the frames for these before they got bought out by Decked.
Here's the problem: My 2003 Chev 1500HD is rated at 2280lb. I think they said the 2000XL unit weighs like 500lb so, it would reduce cargo capacity significantly.
Also, for comparison, a 2023 Chev 3500 RWD single cab short bed gas engine dually is rated for something like 7500lb. Again, the 2000XL unit is rated to carry 2000lb. So, if you figure the unit weighs 500lb, you're still giving up 5,000lb of potential payload capacity.
I love the idea but it's for yuppies who don't really haul very much anyways
That's not to mention the cargo space around the wheel arches
This can be the case! As for the wheel well space, check out our Drawer Systems if you wanna get above the wheel wells!
I really want one of these but my only complaint, I'm positive my Milwaukee tool box would hit my tauno cover even with just the box slide. Sits quite a bit higher than I thought it would.
Sits 12" high! How much room does your Tonneau cover leave you?
How high we loose on our truck bed hight for that cargoglide?
Lots of classic small pre Tacoma Toyota trucks out there. Any plans to make glides for smaller Toyotas. Or start taking custom orders? Thanks. If already covered all this, sorry. I work- all the time. 🥴😁
Since the deck is marine plywood, is it possible to safely add low profile tie down points where you might need them? I’m thinking the bolt-in quick release tie downs. Thanks.
Hey Gino. Great question. The CargoGlide comes with four tie down points on the sides. As far as screwing in additional tie down locations, we don't recommend it.
Is the drawer system cargo glide compatible with the Leitner ACS Classic bolt-on on a Tacoma?
Yes!
Do you offer the brackets for connecting to an 8' bed with à 6'6" decked thank !
Do you have a Drawer System already in your 8' bed? If so, you can easily mount a CargoGlide on top of the Drawer System and it will span the length of the system. If not, you can install a CargoGlide in your 8' bed that will be full length. Check out our CargoGlide for Drawer Systems here: decked.com/products/cargoglide-for-decked
How much vertical height do you lose inside the truck bed? I have a truck bed cover, and my only concern is losing the vertical height and not being able to put a generator or ice coolers on top of slide.
Our Drawer System is 12" tall, and our CargoGlides range from 4" tall, to 7" tall depending on payload rating
I bought an air lift first. Once I install that, I'm ordering decked system with cargo slide. It'll work well with my system one ladder rack system. Contractor trying to get rid of his trailer
That's our main goal too! Let us know how the build goes!
@@Decked air lift on 4 days ago. Need to order decked system. Missed Christmas deal
I just bought a used truck and it has your pull out drawer unit in it. My son And I are going on road trip and i decided to leave it in and use it. I'm parking a quad & a motorcycle on top and putting camping stuff in the drawers. Unfortunately the previous owner took it apart, and the dealership half a** put it back together. It seems to be missing some parts. I went on your website and I couldn't find the pieces i need.
Speaking of going on your website, I just did that, and then I sat down and had dinner and picked up my phone, the 1st thing that came across my CZcams channel was your commercial. Google is so intrusive.
Blame Zuck! 😂
As for the missing pieces, we can help you out! Shoot Service@DECKED.com an email about this! We'll get you fixed up!
On the 100% slide out unit that supports 1000 pounds, how tall is the unit on the top of your deck? I'm trying to figure out how much headroom I will have for a tonneau cover on my Ram 1500.
Thanks
Check the tech specs for your specific truck's model. Any height is added to 12" which is the height of the Drawer System!
Also, would me and my gf be able to sit/lay on this when we got to the drive in movies?
Of course! Great idea!
Do you guys make this for the Ford Maverick?
We do make a CargoGlide for the Maverick!
Would the surface material stand up to flat head shovel use with gravel, cut back, etc?
For the Drawer System, we'd recommend throwing down a sheet of ply on top of the deck. The CargoGlide will hold up great!
@@Decked Yes, this would only be for the cargo glide.
@@nytridr Yup, you're good to go then!
do they make this for ram with ram boxes?
We do! Check them out here: decked.com/products/decked-drawer-system-rambox-1500-2500-3500
I'd like to see a comparison of 70% vs 100% from above.
We'll check our archives!
@@Decked standing by.
Any luck?
Do you make one that fits in a Tahoe.
We do not currently
So I was told that adding a fridge slide to the decked drawer system voids the warranty. How does this not void the warranty because its made by Decked when it does the same thing?
If the fridge slide can mount exactly where our CargoGlide mounts, there should be no issue. The CargoGlide mounts directly to the steel subframe of the Drawer System. Shoot us an email so we can look into this for you. Service@DECKED.com
Thanks for the response. I guess I could just use the cargo glide as the slideout with the drawer system I just bought.@@Decked
I installed one by the dealer, but it has lots of lateral movement by about 2” or so, is this normal?
That is not normal. We'd suggest tightening your "J-Hooks." These bolt heads are located inside each Ammo Can. If you need assistance, shoot us an email at Service@DECKED.com!
@@Decked by the way, please note I installed just the cargo glide directly to the bed. So I’m not sure what J-Hook are you referring to.
Thanks
will the cargo glide hold 4 ×8 plywood sheets???
The CargoGlide is 48" wide so it would be very tight!
I was wondering the same thing. The slide out that mounts to the cargo box should be as wide as possible.
Is it safe to build an a frame on it for doors and windows
1000lb cargo glide on decked system
You could, if that's going to be the main use of the CargoGlide
So, cargoglide is now Decked?
Yep!
yup, and just found out they made a design change, my brand new cargoglide fell apart in 2 days.. .they used self tapping screws into the side of the plywood to hold the rails on now instead of bolting.... new owners are trying to make it cheaper
@@chrisbunting9312 Hey Chris, I believe we've been in touch about your setup. We hate to hear about this, and hopefully are getting you taken care of, correct? We're for sure not trying to make anything cheaper! We still have the same CargoGlide team in place, from before the acquisition!
How we’ll do it it lock into place when fully closed? With the tray empty, will it rattle under normal driving conditions? (Is there side to side and/or front to back movement?)
It locks automatically with the use of the latch! When squeezed open, it's free sliding. When released it locks in place. No, you'll not have any rattling when un-loaded, in normal driving conditions. And unfortunately it is only a front to back slide at this time! Let us know any other questions!
If you can make a cargo glide with a 100% extension… Then why can’t you make your two drawer Decked system with 100% extension…
The most aggravating part about having the Decked drawer system on my F150 is that the drawers do not pull all the way out!!! It sucks.
I love the system except I can’t get to everything because the drawers do not pull all the way out…
Even one of your commercials says that you can’t make a drawer that offers 100% extension but now you have a product that shows you have a cargo glide with 100% extension!!! 😂😂😂
Hey Juston. We try to make it clear on our website that the Drawers do not pull out all the way. Each drawer can hold up to 200 lbs and full extension would place too much pressure on the top of the deck. We chose a compromise that limits the extension but still minimized the height of the Drawer System itself. This also allowed for a taller drawer. The 100% extension CargoGlide drills into the bed of your truck so it has a must sturdier base and allows for full extension.
I have problems with my cargo glide , it’s only 2 months old & it doesn’t lock in place & there is no phone number to talk to this company . I made a big mistake buying this . Please don’t believe these videos.
It’s a great idea but not perfected yet . I’m suffering
Hey there, shoot us an email at Service@DECKED.com, or give us a call at 208-806-0251
Boomer from the waist up. Zoomer from the waist down.
😂