Thank you for your video. Have you encountered a situation where the bowden cables fail to release the deck? Passenger side appears to have worked but driver side cable does not release the latch, despite being fully extended. Thanks again!
@@jdcarsek1557 Hey no problem. Thanks for the reply. My guess is that the stuck release and soft top closing failure are the same problem. Time to pull some panels.
@@rahusband yep.. your windows need to be 100% functional. . Problem with your windows any of them it won't work at all. Window motors also as they sense the if the window is shut or open. Then you need to get it on a machine and have it all reset as the alignment will also be out due to opening manually and will give of error codes on ecu. Boot wont work until windows work and roof is folding again. I did this fix on myself. Again 100% window issue
Thanks for the vid mate, really helped!! HOWEVER, I manually put my roof down because my driver side window did not work (so wouldn't go down) I put it back up manually and now it keeps beeping saying the roof is not secure. Do you know how to fix this!!?? Thanks
Mate I ysed your guide to.get my failed roof back up 2010 model M3 auto. Which I was very grateful for however. Now my boot will not open, any top tips or helpful hints gratefully accepted. Rgds Andy
I'm sure if the roof is non operational The boot switch is deactivated The fault in the roof has to be repaired in order to reinstate all switch functions
Why do you have to use the cable to open the trunk? Can you just use the key fob to do it if you have the fob? I'm just trying to fix something and want to manually open the convertible hatch, but can use the fob to open the trunk, right?
I have a problem with a car I'm working on, maybe you can help. I have a 2013 BMW 128i that I am trying to replace the rear shocks on. Need to open the boot to get to the upper shock mounts. I can get the top to go down, no codes in roof module or any other top related codes anywhere else. I opened the trunk and pulled the two release cables, but then shut the trunk. Now the trunk won't open, again no trunk related codes. I have to get the trunk open to do anything with this. When I look at the upper back seat to try to get into the trunk through the inside all I see is the container bag for the conv top. Any ideas how I can open this trunk?? Any help you can provide would be greatly appreciated. I have a customers trunk half disassembled, with everything from their trunk inside the car and can't open the trunk to put it all back together.
@@keagangough3475 The alien key used in the vid Use this to release the roof Lift the rear of the roof Pull the 2 release in the boot Lift the rear of the roof Lift the cover panel Put the roof into the compartment And close the cover If the boot won't open You'll need to dismantle the rear seats
We did have this problem And the only way we did it was to dismantle the rear seat and pull off the boot panel which exposed the emergency release cable inside Terrible design I know That's how we got the boot open When the boot switch was inoperable
Hi, my roof was going down but the rear shelf didn't go down before the canopy closed, so the canopy is closed and shelf is on the outside, so it won't automatically open or close and I can get into the boot because the rear shelf isn't inside the car! Any ideas?? Cheers
Need to remove the rear seats Pull the boot cover off from inside the boot cavity You'll see the emergency release pull wire Pull it The boot will open
that was easier than I thought thanks
Brother thank u you've just blessed with some good knowledge and help me out a lot. Real G
Ok great! Thanks! Now how do you reset it?
Very helpful
many many thanks - the young guy who is helping you, knows what he is doing! one day he will be a great mechanic!
Thanks,
Thank you for your video. Have you encountered a situation where the bowden cables fail to release the deck? Passenger side appears to have worked but driver side cable does not release the latch, despite being fully extended. Thanks again!
Unfortunately not sorry
@@jdcarsek1557 Hey no problem. Thanks for the reply. My guess is that the stuck release and soft top closing failure are the same problem. Time to pull some panels.
This video was very help, I put the top up, now I have a red flashing light, my window want go up and I have to use the key to open the trunk.
Yes I have same problem now... did you get it sorted?
Anyone figure out how to reverse the procedure so the top will function automatically again?!?!
@@rahusband yep.. your windows need to be 100% functional. . Problem with your windows any of them it won't work at all. Window motors also as they sense the if the window is shut or open. Then you need to get it on a machine and have it all reset as the alignment will also be out due to opening manually and will give of error codes on ecu. Boot wont work until windows work and roof is folding again. I did this fix on myself. Again 100% window issue
@@drep12 all windows are working fine. So it just needs to go on a bmw type scanner to re-set it?
@@drep12 please assist us
Thanks for the vid mate, really helped!! HOWEVER, I manually put my roof down because my driver side window did not work (so wouldn't go down) I put it back up manually and now it keeps beeping saying the roof is not secure.
Do you know how to fix this!!??
Thanks
Itll need to be plugged in and reset
JD will releasing the camshell manually, then locking the top electrically (on the close top button) reset the clamshell locking mechanism?
I'm sure it needs to be computer reset
Mate I ysed your guide to.get my failed roof back up 2010 model M3 auto. Which I was very grateful for however. Now my boot will not open, any top tips or helpful hints gratefully accepted. Rgds Andy
I'm sure if the roof is non operational
The boot switch is deactivated
The fault in the roof has to be repaired in order to reinstate all switch functions
@@jdcarsek1557 many thanks for the info. I have a fault code reader for my VW T5 I'll try to get a code via thst if possible and go from there🙏
How to re-position/reset the two cable in the trunk
Push the cables back in
Then it'll need repaired
I'm sure you can read positions of the switches with the scanner
It's been a while
Why do you have to use the cable to open the trunk? Can you just use the key fob to do it if you have the fob? I'm just trying to fix something and want to manually open the convertible hatch, but can use the fob to open the trunk, right?
If it works
Of course use it
Mine didn't have an option for this
I have a problem with a car I'm working on, maybe you can help. I have a 2013 BMW 128i that I am trying to replace the rear shocks on. Need to open the boot to get to the upper shock mounts. I can get the top to go down, no codes in roof module or any other top related codes anywhere else. I opened the trunk and pulled the two release cables, but then shut the trunk. Now the trunk won't open, again no trunk related codes. I have to get the trunk open to do anything with this. When I look at the upper back seat to try to get into the trunk through the inside all I see is the container bag for the conv top. Any ideas how I can open this trunk?? Any help you can provide would be greatly appreciated. I have a customers trunk half disassembled, with everything from their trunk inside the car and can't open the trunk to put it all back together.
Opps, that was supposed to be directed at the person who posted the video, but if you have any insight I'm all ears.
Please can u show us how to open the roof
Sorry
The car is long gone
Can u tell us though?
@@keagangough3475
The alien key used in the vid
Use this to release the roof
Lift the rear of the roof
Pull the 2 release in the boot
Lift the rear of the roof
Lift the cover panel
Put the roof into the compartment
And close the cover
If the boot won't open
You'll need to dismantle the rear seats
I have the same problem my roof does not move freely
Can you tell me how to open the boot when roof is not locked ccid270 code
We did have this problem
And the only way we did it was to dismantle the rear seat and pull off the boot panel which exposed the emergency release cable inside
Terrible design I know
That's how we got the boot open
When the boot switch was inoperable
Hi, my roof was going down but the rear shelf didn't go down before the canopy closed, so the canopy is closed and shelf is on the outside, so it won't automatically open or close and I can get into the boot because the rear shelf isn't inside the car! Any ideas?? Cheers
I'd need to see the car in person
Sorry
A bit late but just try to manually force it open and try it again. Shall work
Is it possible that my car doesnt have that cable in the boot? German spec
No sure
I'd imagine
It must have something to emergency release the boot
IO o fatto la stessa procedura nn si alzano più i vetri che può essere
What do I do if I can’t get into the boot
Need to remove the rear seats
Pull the boot cover off from inside the boot cavity
You'll see the emergency release pull wire
Pull it
The boot will open