How to replace impeller on Mariner 15

[@CP-df9ck]

This is the only video I could find that has a well lit view up into the mid section showing the holes where each rod is suppose to go, very helpful, thank you thank you.

[@ogbuke1]

Hands down best video on impeller change on this engine! Now I feel confident to do it myself

[@danielwalker2976]

Fantastic video. You answered all of the questions I was having while doing this same repair. Thank you.

[@michaelpeck5547]

Thank you for making this video. I'm picking up a Mariner 15 on Saturday and I plan on doing this first. Also, your vid didn't have an annoying intro and a bunch of distracting music. You were right to the point.. my kind of people.

[@WineScrounger]

And now a word from our sponsor, Raid Shadow legends

[@edcrispe2367]

Gr8 video.Excellent presentation of instructions and video.Very explanatory without confusing.Well done from Down Under Australia mate.Thanks again.

[@ArkMark58]

I can't tell you how much this video helped me. I was reluctant to do this for the first time. I have that exact motor but in the 6 hp. The replacement part is the same part # as you pointed out near the end of the video. After watching this I had my confidence. Completed the job by myself and everything worked like a champ. You are the man! Simple instructions and to the point without trying to show everyone how much smarter you are than everyone watching the video.

[@seriouslyflawed]

I found your video very helpful with my 9.9 merc. Other videos do not show disconnecting the gear selector or the stop on the shift shaft. Thanks

[@joesshop3622]

Killer video, totally to the point without the fluff!! May I add..... I'd skip petroleum base lubes on any rubber seals or O-rings, it can swell or soften the material. Silicone based is best. Use "tune up grease" for spark plug boots or "Dielectric grease" etc.. These are essentially the exact same products, thickened almost clear silicone grease. Also works wonders on low voltage spade terminals or any other 12v connections. Clean connections, add silicone grease to mating surfaces and forget oxidation forever!!

[@7divad37]

Excellent video, I can't believe you did it without swearing, especially when the water tube dropped out from the motor...........

[@MATTSLIFE.]

Awesome video brother, I’ve got the 25hp and it’s very similar steps to replace. Thank you for the help!

[@thomasboshell3222]

Wow! This video was a SUPER help! Great job guys, and please keep posting such informative videos! Thank you, thank you, thank you!

[@mebcool]

Thanks for the video dude.
My 1982 Mariner 15M must be a different year than yours, because the pin to the shift linkage was altogether different.
Your video still helped.

[@patrileys]

Nice job!!! Singer-songwriter island mountain pat. I just bought a 15 horse Mariner motor yesterday on a little aluminum fishing boat :-)

[@WineScrounger]

First rate video, exactly what I needed to see. This is the first time I've worked on an outboard so its all a bit new. Many thanks ;)

[@briancraft6818]

Excellent video, thank you so much for spending the time to show step by step!

[@kyleherber3231]

thank you for this video i bought this exact motor off my pops and he didn't know anything about cause he never used it but 4 or 5 times and i have never done an impeller change so again thank you

[@darylsapergia2856]

Well done, guys. Just picked up a 15 hp 1989 Mariner 2-stroke for my 3.6m Stryker. Of course, it needs a new impeller.TKs. 2 thumbs up - good video.

[@GTsPerformance]

Thanks! And congrats on the purchase 😎👍

[@The5thKeeper]

Thanks. The detail in your video is really helpful. God bless you.

[@outboardfixer]

This is a VERY helpful video.

[@gene80shits]

very informative.thanks again.got the confidence i need now to do my own.

[@brucematula833]

Straight up, good job. It helps!

[@gregsheehan5457]

Many Thanks great video with a perfect balance of detail and instructions.

[@grahamdonaldson29]

Very helpful thankyou 👍

[@MrRhlozano]

Outstanding vid bro. Thx for ur help. Very helpful & informative. Please keep em coming.

[@TanTannaRen]

Hi GT, Loved you no-nonsense video. You make it look so easy. I dont suppose you have a video where you dismantle the the forward and reverse gear unit below the impeller? My engine is slipping out of gear. Most likely due to salt water ingress into the gear box and corrosion/fouling of the gears. I have the "official manual" but that is really no help at all.

[@krgreenlaw85]

Your the man and make it look easy

[@ronniewebster4365]

Great Video! I just bought a boat and it came with this motor on it. Was having issues with the pump so I took it apart and Its missing the washer. Any idea where i can find one or do you know the size?

[@kreed1886]

Thank you. Very basic and clear.

[@gomerpyle2760]

I have a Mercury Sea Pro 15... same procedure? Btw... good vid on doing the lower end impeller replace.

[@dancoleman9866]

Awesome video man very helpful!!!

[@mmoon1860]

Nicely explained thank you 😊
I’m looking for mariner 15hp 4stroke

[@wavster24]

Thanks Brother ..Great Job all i needed to see ......

[@smiithy85]

Hey bud, I've got an old 684c just done my impeller, where did you get your kit from?

[@inspireyou9053]

Nice job....One question....to you remove the shifter pin in neutral, forward or reverse?

[@lannybadger7223]

Great video. Very helpful!

[@gtrapper3745]

Thank you !! God Bless

[@BradWithyman]

Done like a pro. Thank you!

[@ronadair2531]

Fantastic video! You the man.

[@conradspear4241]

Superb video

[@michaelbrown7387]

Do you think that was the original impeller? How often do they need replacing?

[@donarmstrong7242]

Thanks a lot. Beautiful explanation. I noticed that there was some silicone in a few places on mine, on the top of the lower unit where it connects to the rest of the motor. Unnecessary I a guessing? Thanks again!

[@GTsPerformance]

Yeah, totally unnecessary. Water passes thru there anyway

[@donarmstrong7242]

@@GTsPerformance Thanks man

[@kennethsmitherman5709]

Great video

[@freddiefoxiii4980]

if anybody has a link for a video that shows all the holes that can possibly be clogged so I can clean mine myself. I have a 1984 mariner 15 2stroke.

[@RUSTYSURPLUS]

Thanks i just might try that my self

[@simonjfoord]

Perfect - Thanks!

[@TanTannaRen]

great video!

[@philsmith631]

Hi, great instruction video! I have a Subaru 15hp 2-stroke built in the early 80´s and desperately need a replacement impeller. Do you know where I can get one?

[@philsmith631]

@Lorne-Again Amateur Armstrongomist Many thx for your reply! Wish it was a Suzuki..... would make things a lot easier but it is definitely a Subaru.

[@kevingrents6003]

Brilliant.

[@russiantank7213]

I GOT 9.9 MY LOWER UNIT IS DIFFICULT TO GET BACK IN. YOURS WENT IN LIKE NOTHING.

[@MegaSensimila]

helps some times moving flywheel slightly while inserting lower unit

[@tercelfish00]

The best

[@birgitthygesen764]

Thanks mate👍🏽✌️

[@centralcoastcamper9631]

Good job!

[@mebcool]

Great video dude.
Do us a favor though, loose the Joe Cool hat & glasses.
All we need is good quality information, instructions, and images of the parts.
Thanks