Video není dostupné.
Omlouváme se.
Frigidaire Refrigerator Repair - Not Cooling - Hard Start Relay Overload Kit - Diagnostics
Vložit
- čas přidán 11. 09. 2013
- This video shows you how to Repair a PLHS37EGSB1 Frigidaire Refrigerator URCO410 Hard Start
Symptoms may include: Not Cooling or Not cold, Evaporator fan running but compressor isn't
5304511983
View this video on our site: www.appliancev...
This Frigidaire repair could apply to multiple brands: such as Frigidaire, Electrolux, Tappan, Kelvinator and Gibson
ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancev...
If we helped you, please support us and Subscribe to our channel!
www.youtube.co...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com...
Thanks for helping a broke homeowner ✌️
Yes
The Supco 3IN1 is a relay, overload and capacitor. Its less expensive for all three of them verses one relay from the manufacture. Please help our ranking by subscribing to our CZcams page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.
Great video.
Thank you
ApplianceVideo.com
ApplianceVideo.com frigidaire gallery circuit board failure
ApplianceVideo.com F. No vvvvvb ...k.",,,,,,yhhubv
This video was right on the money when it came to diagnosing the problem. I just changed the capacitor/starter in my Kenmore. The stock part was special order and cost 65 bucks. The Supco 3 IN 1 was 20 and I have a working frig.
+SuperCal
Thanks for your positive
comment. We are glad we could help resolve your issue and hopefully saved you
money. Please help us provide more videos to our site by subscribing to our
CZcams page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have
the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major
appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email
us if you have any other questions our videos cannot resolve. Thanks for your
support in advance. Matt, Ace Appliance service technician.
*****
I just subscribed, and I will share with as many people as I can. I watched other CZcams videos by other people, but they lacked the information that you provided. Some of the other videos were wrong, or left out important devices. Other videos could cause harm to the frig, but yours was perfect.
*****
Check for a clogged air way or water drip. Clean the freezer and frig inside and vacuum the dust.
Well done! You could always teach at a tech college if you get tired of service work.
Maybe one day! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
@@Appliancevideo I have a Frigidaire side-by-side. The freezer won't get very cold but the fridge side is fine. I watched your video and panel was off the back. I reinstalled it but made no difference. Any suggestions would be greatly appreciated. Thank you. PS your videos are top notch!
@@spulamander in any fridge all the cold air is made in the freezer section. there is an evaporator fan motor that blows some of that cold air into the fridge compartment. if your freezer is not getting cold then it is not cooling which means you probably have a blockage.
empty out your freezer and take off the panel that covers the evaporator.
if you see an ice ball on it then you have a severe Block in your evaporator coils. also check out where the air goes from the freezer section to the fridge section and see if there's a blockage. it could be a spilled broken bag of peas that has done it.
thanks for the video.... i just happened to have the same frig.... fixed it myself and got the part at Grainger for $25.
Thank you for
your positive response, we are glad we could help. Please subscribe to our
CZcams channel or donate $1.00 to our fan funding page to help us create more
quality content. This is the only way we can continue to help thousands of
people like you every month. Just click on the link below and go to our CZcams
page and click on the BLUE support button on the right hand side of the page. Thanks
in advance. czcams.com/users/ApplianceVideos
This is what i like to see
Someone who explains there diagnosing
Thank you for
your positive response, we are glad we could help. Please help us by
subscribing to our CZcams channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your
friends & family know how our FREE videos can help them. Or you can
support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to
post free videos and help over 1-million people per month like you repair their
own appliances. We also have thousands of more quality videos on all major
appliances made by our factory trained technicians at www.ApplianceVideo.com .
Worked like a charm. Thank you.
It worked for my GE refrigerator, thanks for the help. The wiring is different from the Frigidaire in this video but we got it to work. Once again Thank You !
Fernando
Thank you for your positive comment. Please help us provide more quality videos by subscribing to our CZcams page or posting our ApplianceVideo.com site on your Facebook or Twitter account. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.
Great video very informative but i would have loved to see just where you were put the multimeter . Can you please do another video just for that ?
Reading the schematic will help you here. If you don't know how, it can be daunting but if you take it on and get good at it, you'll pretty much be able to work with just about anything that works on electricity.
That was a quality video! I need help figuring out what is wrong with my refrigerator not cooling.
It's very important to keep your appliances at the proper temperatures. Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. If the temperatures aren't kept at the proper settings the more chance Listeria, a bacterium that causes foodborne illness, can grow, especially if the refrigerator temperature is above the safe temperature. Thermometers are the best way of knowing these temperatures and are generally inexpensive.
One of my customers in the Pittsburgh area mentioned Ace. Now I know who they were talking about.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thank you!!! Best video yet! Keep 'em coming!!! This is just what I needed! Cross your fingers! :)
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Just fixed my fridge. Thanks!!!!!!
+Phil Green
Thanks for your positive comment. We are glad we
could help resolve your issue and hopefully saved you money. Please help us
provide more videos to our site by subscribing to our CZcams page or posting our
www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Thanks! I learned a lot. I will still need a repairman as I do not have the fancy tools you have, but at least I can tell my boss why we need a repairman!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
good video if you already know what you're doing
Thanks for your response, and we are glad we could help.
Please help us by subscribing to our Facebook page, CZcams channel, or post
our website www.ApplianceVideo.com .
Or not afraid to try.
It would really help to see how you are testing the OMs readings with the multimeter.
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
I have followed all the steps with my plhs67eesb4 as it is behaving EXACTLY the same way, fan running, display has power, compressor returns equating ohms resistance, purchased the URC0410 and the only difference is that the pins were not 1 on top, two on bottom, but the opposite, since they were not labeled on the compressor, I tried all three positions with power, and only one started the comp, after about an hour, the compressor is literally hot enough to sizzle a hot rag, I've disconnected power but need direction
Shawn Renn If you wired the new relay to the compressor terminals common , run & start correctly and the compressor is not starting or running you have a locked up compressor. A locked or tied up compressor means you would need a new compressor. You would have to call a appliance repair company with the corrct tools to replace the compressor or give you an estimate on the repair. . Please help us provide more videos to our siteby subscribing to our CZcams page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
My Whirlpool top freezer fridge. came with 2 white triangle squares that were over the 2 square holes in the freezer.
Are they suppose to be there or, were they supposed to be removed before operation? The fridge is 12 years old.
Awesome video. Thanks so much.
Thank you for
your positive response, we are glad we could help. Please help us by
subscribing to our CZcams channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your
friends & family know how our FREE videos can help them. Or you can
support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to
post free videos and help over 1-million people per month like you repair their
own appliances. We also have thousands of more quality videos on all major
appliances made by our factory trained technicians at www.ApplianceVideo.com .
REALLY USEFUL.. don't know if the technician i called is going to scam me or diagnose n repair like u did ! fingers crossed !
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
Finally found a good video , thx brotha
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
same tutorial content. thanks, the video is very useful for those who are just learning
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
we have the same samsung fridge but what we did was simply switch off the power for 30 sec or more for the mother board to reset it self and then switch back on and the fridge was cooling again. and also while you waiting for the computer to reset clean the back where the compessor and the coils are that would help as well, try that before calling some one and spending money on a new fridge. thank u
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
Hi good video I wanna know what to do if my refrigerator is just only showing the lite so and it's a Kelvinator model D110C21RAX5
Great Video! Okay, I have a cooling problem. No cooling at all and the fans are working. The bottom fan in the back and the fan in the freezer next to the coils. The compressor is running and warm. The overload and replay capacitor connected to the compressor are good. There is no ice build-up on coils. The timer, thermostat, and heater are all working efficiently. What could be keeping my fridge from working? Freon? Something else?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Take a amp reading of your compressor running...check that against the data on the compressor..if is close the possible blockage ..if amps very low..freon leak or compressor out put valve is not working...
Thank you
Olá! sou do Brasil, aqui trabalho com refrigeração e faço reparo se diversas placas, ai também nos estados unidos vocês fazem reparo em placas também?
Hello! I'm from Brazil, here I work with refrigeration and I repair several plates, also in the United States do you repair plates too?
clear as mud
pretty sharp!!! thank you for the info!!!! what's that saying ??teach a man to fish teach him to eat fish something like that anyway dude eats fish forever and now keeps it cold too LMFAO
Thank you for your positive response, we are glad we could help. Please help us by
subscribing to our CZcams channel. Or support our parts department at
1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to
help the over 900,000 people per month like you repair their own appliances. We
also have thousands of more quality videos on all major appliances made by our
factory trained technicians at www.ApplianceVideo.com .
Give a Man a fish you feed him foe a day,teach a Man to fish and you feed him for life.
Could this be done one a unit that has an inverter board on the compressor?
The compressor winding ohms aren't fluctuating your meter leads are.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Hello. I have a upright freezer. I did all you suggedt measures the 3 prungs and add thr 2 numbers and it total the 3rd prung.
All connect the 3 n 1 and the Compressor running super hot and does not go into freeze temperature.
I order and replace the start device.. Nothing compressor just click on and off...
Would a leak in the system cause tge compressor to click on and off? Low refrigerate??
My freezer door was left open for 12hrs! Got rid of 85% of items in both compartments, unplugged and cleaned up. To be safe I used blow dryer on freezer vents so air can flow from freezer to fridge. Cleaned up and plugged back in, seems to be getting cold nicely. Did I do any permanent damage to the compressor or anything else?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Hey bro, when 2 of the 3 leads on the compressor pins are open then its bad ehh? The thermal overload only opens one correct?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I have a WHIRLPOOL fridge with top freezer. The freezer is real cold but, not freezing food and water in ice tray not freezing.
The fridge part is barely cold. The compressor is running and kicks on and off as supposed to be. The compressor is not hot to touch and fans are working. The refrigerator is 12 years old.The freezer and fridge was almost empty so, I filled the freezer and fridge with food. Almost full. Not blocking any vents.
Could leaving the fridge and freezer almost empty for about a week affect this?
Awesome video. Thanks so much.
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.
SOUNDS LIKE THE FAN IN THE FREEZER IS NOT WORKING
Supco 3 in 1 saved the day!
Yes it does...
what is the multi-meter set to when you're testing the compressor?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I have a 3 year old electrolux EI28BS65KS french door with bottom freezer and i'm having issues with the fridge temp. the freezer is at zero degrees and the fridge is 58. i've done numerous things. took all freezer stuff out. took the plastic shield off covering the vents and the vents were all iced up. and the back panel covering the coils had built up ice. so i did full defrost. plugged it back in and it was fine for 4-5 days. keeping temp. then my water lines froze. so i had the door open taking out drawers and getting to the coiled up water line and put a hair dryer on it for a couple minutes. got the ice line thawed out and working again. once i put everything back together, the fridge temp problem came back. now i'm zero again in the freezer and 58 in the fridge. i've ran through the diagnostic tests and i'm not getting any errors. i feel like its a defrosting issue but not sure. so i'm open to any and all thoughts. ready to dig in and pull everything out that i can in the freezer including all panels and get a better look at the coils. i assume they are freezing up again. thanks.
Great question, with our
technicians now getting hundreds questions weekly, they are answering all questions
at our website at ApplianceVideo.com under our Repair Help section. We have over
3,000 common questions and answers that you can easily search through by your
model number, appliance make, and problem or error codes.
Thank you very Helpful
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
This video is probably too old for anyone to see in order to help me, but I'm going to take the chance anyway...
I think I might have a circulation issue with my fridge. The freezer is great, but the fridge won't cool. When I put my hand over the damper, there is barely the faintest amount of air coming through to my hand, but as soon as I open the freezer door, I feel much more air coming through to my hand. I think the return air vent that allows air to pass from the fridge back to the freezer is blocked.
I tried pouring hot water into it, but it pooled up and then froze, so I put a blow dryer on it for an hour! A great deal of the ice melted, but I didn't see the water pooling into the drain pan under the fridge, and my fridge is still warm. Maybe I just need to hit it longer with the blow dryer?? There may be ice deeper into the vent. Any thoughts?
good
Great info besides the part you used to fix it. A hard start device will kill the compressor eventually and definitely shorten the life of it.
yes that is what I was trying to say. I've called Frigidaire as a authorized service technician and they say if you see a hard start and they have no more warranty because they called some guy like this instead of an authorized servicer.
@@mrthiefy ya and if it wasnt that it would be something else. Warranty Good Luck.....
Fantastic video , it fixed my problem. Thanks
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Hard starts are NOT a fix. It is only temporary. The overload relay @ 9:22 sure looks like a capacitor to me. Also, how did you check the amperage. Maybe just the solid state relay went bad from arcing (turning on and off). Sometimes, the 3 n 1 does not always work in these situations. ALWAYS CHECK YOUR AMPERAGE! Before adding a 3 n 1. An amperage check can be done with an amprobe. Before and after repair.
Hi. Awesome video. How do I know which 3in1 to use on any compressor?
NoneGreat question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
What business software are you using to track inventory and all the rest? I am needing something more robust then what I am using.
Where can I buy the relay? Or even a substitute because I can’t find these parts anywhere!
Very Good!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping 1.6 million people like you every
MONTH. Please help us by subscribing to
our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook
page
Well done, thank you for posting this video!
Thank you for
your positive response, we are glad we could help. Please subscribe to our
CZcams channel or donate $1.00 to our fan funding page to help us create more
quality content. This is the only way we can continue to help thousands of
people like you repair their own appliances. Click on our link below and you
will be on our CZcams page. Then click on the BLUE SUPPORT button on the right
hand side of the page.
czcams.com/users/ApplianceVideos
I have a Defy F640 side by side fridge/freezer unit. This fridge has 2 comprssors. Am I correct in saying that the fridge and the freezer are 2 total separate units? So if the compressor for the freezer needs to be replaced it will not interfer with the fridge side. So l won't need to regas the fridge side?
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
If my fridge compressor is warm to the touch does it mean it's definitely bad?
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over
4,000 common questions and answers that you can easily search through by your
model number, appliance make, and problem or error codes, and It’s free to
search through our question & answer library.
@@Appliancevideo hi i have a whirlpool side by side refrigerator and is not cooling and the compressor fun is working but the compressor is really hot, any help please
My freezer is cold but fridge is warm defrost is working so is evap fan drain line is also clear any suggestions I also can feel a little cool air blowing into fridge
Dee
Go to ApplianceVideo.com and type in your model number or your symptom you are having. Our site has over 2600 Free videos on it to help solve your problem. We add new videos every week. There is a very good possibility you will find a video that will help solve your problem. Please help our ranking by subscribing to our CZcams page or posting our ApplianceVideo.com site on your Facebook or Twitter account.
hello sir,i have the same model mine has lots of frost build up on the freezer part and the fridge part is warm not cooling properly.i checked my defrost thermostat is good and I also checked my heat element for defrosting that is fine too,what can be the problem? I think that would be the cold control if it is cold control how to test it or check it if it is not working,and by the way the fun on the freezer part is running too,thankx in advance.
Hameed
I would say you have a defective defrost control, if your heater and thermostat are good the only other possibility is the defrost control. Please help us provide more videos to our site by subscribing to our CZcams page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.
thank you very much for quick answer
No problem, please let us know how it turns out and if you have any further questions. Thanks for your support
Hello dear,
There is some problem with my fridge which is not cooling at all, it happened just after a month of no use while it was plugged in and turned off from the thermostat switch (although before that one month break, it was working totally fine). When turned on, the compressor starts its normal sound, and water dripping sound through the radiator can be heard from the interior of the fridge and freezer (as in normal refrigerator start up). I searched online for several testing techniques, almost all are the same. There are three probes in the compressor: C, M and S (where C is the top one and M,S are side ways). The resistance check between C-M=40.56, C-S=44.34, and M-S=84.9 ohms. So theoretically, it looks alright, as M-S = (C-S) + (C-M). But the ohm reading examples on the internet are 4, 6 and 10 ohms. May be different types of compressors have different resistant readings. However, the continuity check is a bit ambiguous. The continuity between C-M and C-S is alright, but between M-S is no buzzer sound, however the multimeter displays some ohms reading for it. So i am confused about this test. The relay is a SSR type so cannot be checked. And I am doubtful about that relay because both on it probe and the connecting wire, there is some electrical burning indent. But the continuity between two probes of this relay is ok, so it’s pretty confusing. The thermostat is a large advanced type, so I am not sure how to check that. Please reply me ASAP because m in a heck. or PM at mowaisshahid@gmail.com.
Thanks
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.
Good video for does that need it because it my job
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
*Hello, I'm from Vietnam and I do the same job as you, I just set up a CZcams channel so I hope to receive your support and help, Wish you health and success, it's a pleasure to work with you. I know you, look forward to learning more, Thank you*
is there a retail store (like lowes, best buy, radio shack etc) that would carry the capacitors so I don't have to order the part online?
Shawn Renn You would have in the area you live in and find a retail outlet that sells HVAC parts. I am sure you can find one they are in every city. Please help us provide more videos to our site bysubscribing to our CZcams page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our
factory authorized technician’s also daily provide free professional Repair
Help to people like you to help solve their appliance problems. You also have the option to email a factory
service technician with a question at www.appliancevideo.com/repair-help/ . If
you need of parts for your major appliance, we have over 5-million parts in
stock at savemoreonparts.com/ . Thanks
in advance for supporting us. So email us if you have any other questions our
videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.
Great vidoe, thank you!!!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
What did you put the multimeter on to tech the pins ? and what should the number be ? 10?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Thank you!
Aren't you supposed to fill the outside parts of the compressor with water and let the starting components salitify while the cord is plugged in the wall? Oh wait.... I think that's what you're supposed to NOT do in which my heart reading was off when running at the treadmill at the gym. Thanks for the video. :)
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Wow that is a hard start kit just like in Hvac
have some cooling problem, i notice there are some condensate in the freezer, and the compressor run much longer than before before shutting off.. also this past couple of months i notice the compressor a little bit louder when its on. i have an electrolux etb3200pe its already 3 years old...
Great question, you can call our parts department at 1-800-830-5465 and they can give
you help 6-days A week Mon-Sat . If you have a more technical question that our
parts department cannot answer,
our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over
3,000 common questions and answers that you can easily search through by your
model number, appliance make, and problem or error codes, and It’s free to
search through our question & answer library.
i found the problem.. i replace the extension wire. it seems that it cannot handle the power required for the fridge its an old extension cable, so i got new one. If we didn't have a brownout i couldn't notice it. because when the electricity came back on, i notice that the fridge lights is not turning on, so i tried to use a different newer extension and now it got all its juice needed. Thanks for replying
When a refrigerator is not cooling, leaking. If the gasket is loose, this is for you. Fix it in less than 5 minutes and less than $2. Check it out, I did it and it worked:
czcams.com/video/cnZo3zKMoeM/video.html
Willow Silos amzn.to/2D0Almj
I seen a domestic 115 v kenmore refrigerator/ freezer with a 175v compressor but not converter anywhere. How does that work?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Why do you install a hard start kit and not just replace the overload and start sw?
I'm sure that they use hard start kit vs compressor start relay simply because the start relay can be very specific and the start kit used in this video works almost universally and costs about the same
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
thanks for this video, but where can i get one of those relays?
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
What is your ohm meter set on to check the compressor pins and what should the readings be for the three pins??
Thanks...
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
Set on ohms
What Ohm setting?
Thanks...
Hi Troy, thanks for the video. I have a Kelvinator Impression Series 500 Twin Air No Frost 1998 model. For the past 3 days the fridge department temperature oscillates between 13 and 15 degrees and the freezer temperature is 0 degrees (and not freezing ice-blocks). The freezer evaporator fan is working, the compressor is starting and working, the evaporator is not over-frosting, the air ducts between freezer and fridge departments are free of blockage, cool air is circulating into the fridge compartment, I couldn’t find the defrost thermostat behind the freezer panel, the defrost timer is not stuck in defrost, I tested the heater element using the defrost timer manually and the heater element is heating, I don't know if the defrost timer could be damaged and cycling too often, but I haven't noticed the evaporator fan switch off once, so I don't think that's the problem. The seals were all changed 12 months ago and all sealing well. The problem happened from one day to the next. What can it be, do you have any suggestions? Can the fridge be low on gas? Or can it be something else? Please help.
javierpaez13
All of our technicians are now answering
questions daily on the ApplianceVideo.com website. You can search completely
FREE in our Repair Help section with over 1000 questions & answers. Or you
can get unlimited technical advice and video links emailed to you by our 14
factory certified technicians at
www.appliancevideo.com/premium-membership/. If you are in need of
any parts please support our parts department on line at
savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm
Eastern time. Thanks for your support. Matt Ace Appliance factory service
technician.
ApplianceVideo.com
replace the defrost timer.
When you change the started relay and cap you must do it with exact parts people can get them the one he use is more money and a quick fix I don't agreed with what he did I've done many compressors and I never installed that type of relay and over load
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
That’s a hard start kit. It’s a temporary fix for a failing compressor. It will kill a good compressor in a couple months. This is so wrong.
Why wouldn’t you just replace the part. Wtf ???
What was the issue at hand? Was the fresh food compartment not cooling?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Samsung model number rf26XAEBP, unplugged for 10 minutes comes back in OF OF (demo mode I guess) I reset it using top left and right button. I resets for 3 seconds then goes back into OF OF. How do I test the front door panel or is it shot or something else? Thanks
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
So this Supco URCO410 comes with female flag spade terminals I see. What would someone do who has the Electrolux Relay Overload (like me) and compressor that has three circular pins that are 0.090 in. in diameter? You can't use the spade terminals on that.
I have a Frigidaire fridge & top freezer, that seems to be warm. I cannot put items in top freezer because it is not freezing cold enough. What could be causing the fridge to not get cold anymore?
Carol
There could be a few possibilities that be causing your problem. If you go to ApplianceVideo.com and type in your model number or your symptom you are having. Our site has 2600 free videos on it to help solve your problem. We add new videos every week. There is a very good possibility you will find a video that will help solve your problem. Please help our ranking by subscribing to our CZcams page or posting our ApplianceVideo.com site on your Facebook or Twitter account. Thanks Matt, Ace Appliance service technician.
Hello, we have the LG LSXS26386S Linear model. Only about 2.5yrs old.
Both fans and compressor are running, although the compressor is not getting warm to the touch which seems odd to me. Also, the fan in the freezer area seems to turn on when i open that door, then shut off shortly after door is closed. I feel around the vents in the fridge and don't feel any air movement. I vacuumed and blew out the dirty coils already. Thanks for any tips..
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
I have the same fridge with the same problem, did you ever figure out what was wrong?
Zy Gaines nah, I think it needed a new compressor so I sold it for parts
Should compressor feel pretty warm or even hot
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
If this is my problem' and I suspect it is, would the water/ice dispenser on the freezer door also be inoperative? Note: freezer fan and interior light are working but no cooling.
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.
I have a ge profile that will only cool to 14* in the freezer..could that be a switch or compressor ?..
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
I've replaced the 3 in 1 hard start but I've never used the old capacitor on the 3 in 1. Would this make a difference? I've never had a recall either. Just wondering.
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
yes, i have this doubt too.....
good day sir watching here from Philippines
thank you for sharing new ideas learning a lot
full support kindly at my house too waiting....
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Hello, I have a Frigidaire PLHS69EESS2 and both my fridge and freezer are both staying warm around 50+ degress. I checked the back panel in the freezer and saw a large amount of ice buildup on the copper line that the thermostat rests on but the fan was running. Sometimes the temps would fluctuate, so only the freezer would rise in temp and then fall back down to regular over a few hours or vice versa. I just replaced the thermostat in the freezer today and now they both seem to be running hot. Any suggestions?
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
Hi
Did you disconnect the solid state capacitor or you left it in there?
What's the price for that solid state capacitor?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Hi Dear , what is the name of device you add to comproser? And where I can get?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I have an issue with an lg refrigerator where I have 2 fans in the freezer and another fan in refrigerator where all the fans are not working, I already replaced the main board and I'm still having the same issue, any suggestions?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I just replaced the staring relay and still compressor is shutting on oand off and not cooling?
1/2 hp , 1/3hp or 1/4hp?
Hi I just put a high-voltage board on my fridge and now the buttons on the front panel will not work it’s flashing in Set up mode but none of the buttons work
What about evaporator line going evaporator is frozen but rest of evaporator is not cold.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Thanks for the information
You are awesome
ابو حمود المطيري
Thanks for the positive comment. Hopefully we saved
you some money. Please help us provide more videos to our site by posting ApplianceVideo.com
on your CZcams, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support
our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern
time. Thanks again your support. Matt, Ace Appliance service technician.
which speicific place can i purchase this kit online. i want to make sure it has everything i need. thank you!
Call our parts department at 1-800-830-5465 and the part number is RCO410. Good luck let me know if you have any other questions or need help. . Please help our ranking by subscribing to our CZcams page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.
Of course I am a repair technician and like stuff that can help me like this seems to be able to.
My fridge failed slowly. The compressor started rattling loudly when it shut off. It did this for a few years. Then the freezer would not be down to proper temp. This got worse over a few months until the freezer wouldn't freeze any more. What's up?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
i have checked all you have said in the video i can hear the compressor i can hear fan i can turn on defroster our problem is that the freezer and fridge wont get cold everything seems to be running as it should took panel off in freezer and it all ices up and have defrosted and put panel back on and gets cool but not cold enough like 45* and wont get any colder took panel off again no ice but iced right up as soon as panel was off?
Sam Buck
All of our technicians are now answering questions daily at our www.appliancevideo.com/ website under the Repair Help section. We also have over 1600 common questions and
answers that you can easily search through by your model number, appliance
make, problem or error code and it’s absolutely FREE. You also have the option
to email a factory service technician with a question on your appliance at
www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you
can also search our library of over 2600 free repair videos. ApplianceVideo.com
specializes in quality DO-IT-YOURSELF appliance repair videos and we get over
800,000 views per MONTH to our videos worldwide and growing. If you need of
parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks
for your support. Matt Ace Appliance factory service technician.
+Sam Buck If you don't have a defrost problem, and the cooling thermostat is ok along with timer, it may be that you have a leak of cooling gas from the circuit.
I have a technical repairs done and the problem still persists.
Recharge a Fridge Cooling is Wel but Problem is that When It Stopped Restart very Quickly if u know plz share Thanx
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
Excellent
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I'm a commercial and residential hvac tech..how can I get certified in this? I'm interested
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
i have samsung side by side model : SR-S24NTC the freezer side is perfect for some hours and then stopped working until I unplug AC cable and put it back again but the fridge side not working at all the temp not change and I replaced the temp sensor and thermal sensor but still not working , is the problem in freezer side or relay in the main board or the capacitor I check the diagnose menu but there is no code thank in advance
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
🙋♂️Good morning...
I have the exact same Frigidaire Professional Series over 17 years, that is shown in this video and I am having a freezer issue, my freezer can range from - 4 to 20,
I'm thinking about changing the starting component, would anybody have that part number Available...
thank you
My Tecumseh TP111AR003B8 TPD1380YXA compressor does not show the HP rating? How do I find that, in order to buy the correct 3-2-1 start kit?
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
I want to ask something. I am repairing refrigerators for some time now, but I didn't solve this problem I encounter sometimes. After I recoil the evaporator of the refrigerator, I test the unit and it works fine, the pressure on both sides are normal. after 5-15 minutes the pressure in the low side begins to drop to negative and also in the high side lower to about 120 psi. I turn it off and the pressures take some time to normalize. Sometime, I just change the filter drier to solve the problem, but sometimes the problem continues even I change the filter drier. what causes the pressure to drop?
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our CZcams channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I have a hot point refrigerator. They had a power problem in my area. The refrigerator lights is on inside of freezer and refrigerator, but I do not here freezer or refrigerator making noise. Not getting cold, freezer or refrigerator. Where is the thermostat located on a double door Hot Point Refrigerator?
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
Hello,can you help me ?I bought used viking VCFF036SS fridge for repair.
I opened the back panel and I saw the smoke pipe left side of compressor have small hole and the right side of the compressor the tiny pipe it's broken, when I contacted the fridge the fan turn on ,the light turn on and that it.
I think the fridge have another problem...
What I have to do?
Or it's better to sale for parts etc..
What I have to do?
Thank you!
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
P yes I have a small refrigerator I can give you the name of it and everything can you help me get a wire from attic on it somatic wiring somatic how long will it be before you let me know
I have model FPHN2899LF7, and im trying to understand the inverter. It has 120 going to it, then I just checked the control power to it. It was 20Vs, but the diagram says 12V. The inverter is not putting out any voltage (should be 230V). Nothing runs but the lights are on and high temp alarm. Please help. Is 20v right?
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.