5 Ways To Connect Network IP Camera With POE Power Supply
Vložit
- čas přidán 21. 08. 2024
- How to connect IP Camera using Poe - Power Over Ethernet.
🙏 SUBSCRIBE ▶ / @securitytechadvice1981
FOLLOW US ON:
👉 Pinterest:
/ quickoverview
👉 Google+:
plus.google.co...
Track: Raven & Kreyn - So Happy [NCS Official Video]
Music provided by NoCopyrightSounds.
Watch: • Raven & Kreyn - So Hap...
Free Download / Stream: ncs.io/SoHappyYO
If it's PoE then why do you need a power supply? I would think that that meant the DVR supplied the power to the cameras through the Ethernet cords.
Yeah I was thinking the same thing.
What?
Commentary would have been a tremendous help.
Excellent video and I take this opportunity to ask the following: I have a PoE NVR and 2 IP cameras, one of them with PoE support, for which I use connection #3. The other camera does not support PoE. Is it possible to use connection #5 to activate it? Thank you.
The music is driving me nuts so distractimg
Wk
ikr
Must of got that music off pawnhub
I'm high as f... so it sounded great ! Back to work in 10 minutes.
*it's really helpful video*
Çok iyi
Kamera Bağlantıları ile ilgili daha iyisi yok
Excelente video gracias por la información. Saludos 👍🇵🇪
I have an additional question: If the Camera does not require PoE 12 Volt and the NVR supplies 40 volts in its ports, is there any risk of failure in the camera when using the splitter?
Im clueless but whats the purpose of all the other ones when you can do #3?
The only answer I could think of for the following question I have, is to give the camera an IP address,
But otherwise, WHY do you need a switch or router?
Can't you just connect ONE camera to the Ethernet port of a PC you want to use as a NVR/DVR, by changing the addresses in internet options/ LAN properties ?
And if so. HOW?
Or is it absolutely necessary to have a switch ?
@IT IZME He wasn't doing any of that to show you or me how to do anything, It was just to get his required time for payment from CZcams. If he cared about what he was doing he would have explained everything he was doing.
Thank you
Informatic video and maximum wire length power supply only Poe to IP camera.
100 meters is the maximum length of the cat5/5e
100m
@@AzharKhan-sn9vf thanks
@@michaelmayfield4304 thanks
Nice...very interesting...
very useful video. may I connect 2 ip cams coming from a poe switch port to nvr lan network interface and more 2 ip cams in NVR Network Interfaces with PoE Function?
Mix and match won't hurt a thing. You're only trying to get 48vdc to the cameras to power them.
Not sure about this? You dont need mains power if its POE?
Not to the cameras. The 48vdc can be supplied to the cameras from the PoE switch. It comes across the blue and brown pairs.
@@michaelmayfield4304 is it mandatory to attach DC 12V/3A Power adapter to ptz ip 4MP cameras or no need...? As in my network NVR is connected to poe switches and poe switches connected to cameras so I'm lil buffeled whether to set preset/tour PTZ without DC adapter
How to connect multiple cameras with method 4? If i have 2 switches, with 4 cameras each. Do i connect it to a 8ch nvr or 4ch nvr is enough?
If you are going to connect 8 cameras then you should have 8Ch NVR.
You would use a minimum of 8 channel NVR or a computer running nvr software like Milestone, iSpy, or Avigilon that allows multiple cameras.
nice projection. Jai Hind
Obrigado ☺️
amazing thank u very much
Спасибо дядя спас на защите
Hii,very nice video. How extende Ip camera with NVR POE more than 100 meters and three screems connected as HDMI 2.0 which at 100 meters to NVR HDMI port?
PoE is not needed for Ethernet cable distance under 60 meters. Additional power provided by a transformer is only used if the cameras are more than 60 meters from both a NVR or DVR recorders, e.g. large properties, farm house, dairies sheds, where expensive material, pumps, compressors, solar panels, stainless pipes and fittings can be stolen, horse stables, factories, etc.
Excellent! Thank you. I have been reading through many stupid comments trying to find an answer to what you just explained. I don't have a power source at any point where I want to mount the cameras, but none of them will be over 60 meters away from the DVR. After reading your comment, it sounds like I shouldn't have a problem. Thanks again.
Good job
#2 wrongly connected. Active Poe out to cctv that suport poe in, or use active poe splitter for unsupported cam/device. If passive poe injector, use passive splitter too. Active means auto voltage and amp (standard at/af). Passive is an hack, make sure the voltage and amp is match.
I want fixing 65 camara how to install
Can we power any IP camera using a PoE switch? (the ones that are having ethernet port for data transfer)
I want to avoid having 2 cables for each camera. I want the data transfer and power to run on the ethernet cable.
Gracias
Good
Lo máximo 👍👍👍👍👍
thank
THANKS
Can connect it directly with WiFi router via poe splitter
Nice
song name pls
Hello, if we have audio PoE camera, and we put an HDMI cable, do we have audio via the HDMI cable?
ethernet cable you mean? depends if the camera does audio or not. some of mine do and some don't. then you need a cam that can take an external microphone if not
which is better 48v direct poe ip camers or ip camera with separate 12v does power vary in performance??
direct connection to the PoE switch - as long as it's powerful enough for the number of cameras. The switches usually supply about 12 watts per connections with an average max of about 70 watts for all connections (for example, the ZyXel GS1900-8hp) if you go above the max watt rating for the switch the cameras will pop off and on.
2 the best applications that..
Super
does it matter to use class A or class B ?
We can use internet of that ?
Most switches are 24v POE and some cameras are 12v POE ... Would you damage the camera ?
In my case I want to use a Synology as a NVR ...hence I just want a switch for powering the cameras ..
Yes you would damage the camera here. Only 24 volt POEs are used on intercoms hikvision. Never for a camera have I seen one here
This information is erroneous. PoE power is between 37 and 57 volts DC with the VAST MAJORITY supplying 48vdc at about 12 watts per connections. Old Analog cameras run at 12 or 24 volts. A few specialty devices such as Ubiquiti M5 Nanostations use 24vdc which is supplied by their own power supplies (if you connect them to a normal PoE switch they won't power up)
@@michaelmayfield4304 is it mandatory to attach DC 12V/3A Power adapter to ptz ip 4MP cameras or no need...? As in my network NVR is connected to poe switches and poe switches connected to cameras so I'm lil buffeled whether to set preset/tour PTZ without DC adapter
@@mrabbasi9403 - this really depends on the camera specifications. It's manual should state if an external power supply is needed. Most PTZ cameras have a power "brick" that supplies the additional power needed. They have to 'P'an / 'T'ilt / 'Z'oom and that usually takes more that the 48vdc @ 12 watts (it can go higher) that are usually supplied. Maximum current is usually 350 to 600mA .
@@michaelmayfield4304 can i have yours email ID or whatsapp number will talk u in detail regarding this matter since I'm new in this field so needed lil assistance
Hello,
can cat5 or cat6 give power to an ip camera? I don’t want to purchase a Poe
Can i tap the power to our electric cable?
Hi. My nvr has one Lan port. How do I connect it to the poe switch and seven cameras to the poe switch? My poe is netgear unmanaged 8 ports.
amit amit connect the cameras to the network switch on PoE ports and connect the nvr to the network switch as well.
cannot display the 3g option in hik vision....how can use this option
Hello i need to do what you did in step 1. What's that box called that you connected an ethernet cable to from the camera with which then connects to the nvr
a switch
@@michaelmayfield4304 Yes but what kind of switch, there are a multitude of variations of switches on the market. Start with POE or non POE that will give you something to think about.
Hit vid
Please put links to buy online
informative
C
nice
still no wiser for my problem :(
thanks mate, this video really help me..
Thanks
2, Poe Injector Output 12V-2 A ????
What if a have more than 200 meter distance per each camera?
Add separate power adapter in camera , nd will automatically come
Hi, for example, if we have 4 cameras, how do we power the 4 of them? With 4 adaptors? Is there a central system for the four of them?
Use a 4 ports PoE injector to power your cameras.
sir mera built camer ka view naie arah hai
Hi guyz if am using dvr 108g f1 how can I connect it online with my phone
With app sir
how to do it
Could you find yet more annoying noises?
apne bataya nvr with poe but apne tu dvr ko direct ip camera se kyu connect kiya explain
That is at least OK.
Hi
does this work with hikivison ?
This all method has work all types of ip cameras and nvr
Dumba$$.....it is hikvision being used.
You connected the PoE injector backwards. It should be IN to the switch and OUT to the camera.
also I don't understand why at option 5 he is using the POE splitter at the camera and not using the cable directly to the camera?
What was the last one?)
The last one is basically the same as the PoE injector. Power comes from a power supply to the splitter. Video goes out the Non-PoE cat5
I dont really understand about the no.5 how benefit to use poe spliter compare to poe switch no4.... can you help explain? To me i ,ve the no4 ....
You also have to account for voltage drop
Run 2 cameras with one line if it has enough power?
Poe switch
The 3. Is correct the other what the heek nice teach lol
I see UTEPO PoE Switch in this video, am i right here?
More UTEPO PoE Switch, www.utepo.com
UTEPO is just a brand name, there are many. HP, ZyXel, TrendNet, etc.
You forget powerlines/home plugs
If you have to hook power supply AND ethernet then its not poe, poe is power over ethernet
who can resolve these problematicals solutions?? kia kia kia. Have good day and enjoy yourself for thinking.
Direct poe switch le bahi faltu me itni wire failane se kya fayada
He has all the schemes wrong, since he does not have a cable coming from an ethernet provider for 100 mega bits in the scheme!!!!!!!!!!!!
pls name of music
"So happy" Raven&kreyn
بدنا طريقة البرمجة
Get rid of the crap music trap . . . . and add a voice over!
why all the ANNOYING MUSIC !!!!!!
Very very annoying songs
Very very annoying song, Dislike bcz of song
Useless.
Very very annoying songs
Very very annoying songs
Very very annoying songs