I did not think you were going to cut that web design from a solid piece. I thought it was round stock and you cut, bent, and welded it. The talent you show with a torch is awesome. Thanks for such a detailed video. I wish someone would donate a steel building and a couple of go pros to you. It would benefit all of us fans of yours. Great job dude.
I really like the dual tubing around the frame. Making the spider web from a flat sheet was awesome. And the added detail to the side gussets really makes it stand out. I am inspired now to go make one for my Ram. Thanks
I recently became a subriber-great videos,and excellent work!! I've been a high pressure pipe welder for 35+years,You are a true artist,and well thought out fabricator.Keep 'em coming,and GOD BLESS!!
You have a creative talent and a mechanical talent. Put the 2 together and you have fabricated some amazing things! As always, I enjoy watching you create! It also helps me.
Nice rack! That said... You work around some weather issues, damn. Great talent, your assistant couldn't even help it was so crowded... Great vid, Great channel.
Wow , bet others will want custom bed attachments to protect there Windows. Good job , if you make more patterns could be of use to cut them out before welding them in. YUPP I love watching a craftsman at work. Thank you and God bless you and the family .
hey your videos are the best thanks.can you tell me what the tool I saw you use to mark angle cuts on pipe. looked like it held soap stone some kind of protractor
Everyone keeps telling him to get a plasma cutter. The torch is working just fine. Haha. Yea its nice to have it, but then you have to have an air compressor that can keep up. It adds up. Especially when you buy something decent that you can count on to last.
hey mate, love your work. . I have a question which i think you have probably been asked a thousand times before. can you tell my why you chose oxy acetylene instead of plasma cutting? do you have more control? i haven't used either before and I was thinking about one of these processes as my next purchase as my welding improves.
Really great fab work. How many total hour do u have in that ptoject? Sometimes it's less wear on the body to just put those hours into overtime and have a shop laser cut a design u make on computer. Then weld up the tubing. Just an idea from a aircraft structures guy.
I noticed you use your torch a lot for cutting designs in sheet metal. Have you tried using a powerplasma cutter? Any thoughts on the pros and cons of either method?
I liked what you did there. I'm not sure how you attached the rack and it appears the center brake light opening may be too high to be seen from the rear?
That was some amazing work Allen, mad torch skills. I'm a novice welder, I was told you couldn't weld outside with a mig with gas. Now I know on a very windy day it would blow you gas away, is it possible to weld on a calm day outside with gas? Or should you always use flux core outside? Thanks.
love your vids a true craftsman how long has that ryobi been working? i always thought they were crap had a couple over the years and they burn up in a couple months of light use get hot and just die maybe i'll give it another try..... you are skilled and seem like a good person that's the main reason i watch your vids thanks
I like the ryobi grinders, the brushes burn up quick sometimes but just take the screw out of the side and its replaceable. for the price tho, they are pretty good
Beautiful work... the hard way, but awesome none the less. If anyone ever needed a plasma-cam or water cutter it's you! Next one, why don't you lay it out and take it to a bigger shop to be cut on a laser table? Save you loads of work and time!
I did not think you were going to cut that web design from a solid piece. I thought it was round stock and you cut, bent, and welded it. The talent you show with a torch is awesome. Thanks for such a detailed video. I wish someone would donate a steel building and a couple of go pros to you. It would benefit all of us fans of yours. Great job dude.
I typically loath headache racks. You made a beautiful one. GREAT JOB!
I really like the dual tubing around the frame. Making the spider web from a flat sheet was awesome.
And the added detail to the side gussets really makes it stand out.
I am inspired now to go make one for my Ram. Thanks
awesome work Allen I like how you do it with regular tools us average guys have. You have great talent
It's called "use what tools you have and work harder"....great job friend!
A labor of love my friend! Looks great as does everything you do always does! Keep up the awesome work friend!
Love the "high-tech" look done with some "low-tech" tools.. True craftsman. Keep up the good work.
That's why I got me a cnc
You sir are not just a craftsman, you are an artist! I’ve never seen a more beautiful headache rack.
I recently became a subriber-great videos,and excellent work!! I've been a high pressure pipe welder for 35+years,You are a true artist,and well thought out fabricator.Keep 'em coming,and GOD BLESS!!
Bloody hell you do some lovely work mate , it looks as wet there as it usually is here in the uk🇬🇧👍🏻🤣🤣
great work Allen, keep the videos coming
You have a creative talent and a mechanical talent. Put the 2 together and you have fabricated some amazing things! As always, I enjoy watching you create! It also helps me.
Nice rack! That said... You work around some weather issues, damn. Great talent, your assistant couldn't even help it was so crowded... Great vid, Great channel.
nice to see other versatile & talented person like myself, nice tidy workmanship. you got there in the end.
holy crap...your a hell of a craftsman.....nice job...I like that you said you goofed up...showed us...then showed your update...
you are talented bud. well done. your videos are awesome!!!
awesome work ...you really need a small plasma table...you would love it
That's a sweet build mate. Cheers.
That rack is sick! This one has inspired me.
You're a talented fella ................Very nice work
now thats one classy lookin rack bro allen awesome design 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
thanks!!
Cool brother.
Great work !
I have also done a lot of welding outside.
That is freaking awesome!!! Great job bruh!
Nice project, looks great on the truck.
Wow you are a great fabricator thank you for sharing this video God Bless....
thanks! God bless you as well
Nice rack. You do better with that torch than I do with my plasma cutter.
That is sharp, my friend!
great work man!
thanks for sharing, looks awesome
Very good work. Great job.
Wow , bet others will want custom bed attachments to protect there Windows. Good job , if you make more patterns could be of use to cut them out before welding them in. YUPP I love watching a craftsman at work. Thank you and God bless you and the family .
Allen, good tip on the jigsaw - that will come in handy
yea I've done some surprising things with a jig saw
Fantastic job there mate and great design
+mtm 4x4 thanks!
Wow... That is Nice... Great Job... Great Videos...
excellent work
AWESOME job 👍👍👍
Wow. You are a craftsman.
thanks!!!
That looks awesome
Great job 👍👌👍
Bad Ass Bro!!.. Nice as always!
thanks!!
That's badass!
very talented and creative here man...nice
Allen, love the work - but you seriously need to make yourself a CNC plasma table!!
That is great work
hey your videos are the best thanks.can you tell me what the tool I saw you use to mark angle cuts on pipe. looked like it held soap stone some kind of protractor
If you had a powerplasma cutter there would be no limit to your work. Fantastic job man.
Nice job thanks showing us
Everyone keeps telling him to get a plasma cutter. The torch is working just fine. Haha. Yea its nice to have it, but then you have to have an air compressor that can keep up. It adds up. Especially when you buy something decent that you can count on to last.
lincoln tomahawk
Very nice!
hey mate, love your work. . I have a question which i think you have probably been asked a thousand times before. can you tell my why you chose oxy acetylene instead of plasma cutting? do you have more control? i haven't used either before and I was thinking about one of these processes as my next purchase as my welding improves.
Really great fab work. How many total hour do u have in that ptoject? Sometimes it's less wear on the body to just put those hours into overtime and have a shop laser cut a design u make on computer. Then weld up the tubing. Just an idea from a aircraft structures guy.
Lotta, work as most quality fab work is. Looks good.
great job
Very nice!!!!
I noticed you use your torch a lot for cutting designs in sheet metal. Have you tried using a powerplasma cutter? Any thoughts on the pros and cons of either method?
I liked what you did there. I'm not sure how you attached the rack and it appears the center brake light opening may be too high to be seen from the rear?
From another fabricator, you do great work! Just need to upload in at least 480p.
thanks! I really do need to upgrade my video making
You reall do beautiful work. Keep it up! I say get a gopro hero 4 and a handful of the cheap UV lens filters in case you hit it with the grinder
I love your work. A Powerplasma cutter would probably cut your fabrication time down.
Dambbb...nice job...
badass work. I'm going to make me one but . A dale Jr one
thanks! that would look good too!
Dale Jr wife made him Quit... So I Quit Dale Jr....
Very nice Bro
very nice! curious what would you charge for that?
Wish the video quality was a bit better but that looks dope as hell! Awesome video
looks good..
That is sweet
That thing is bad ass
What degree angle cuts were used for the top corner pieces?
What did you use to hold the plate in the center when you pushed it in
Allen the track cutter!
Awesome!!!👊💥😁
where you located Allen I need a rack for my dodge
That was some amazing work Allen, mad torch skills. I'm a novice welder, I was told you couldn't weld outside with a mig with gas. Now I know on a very windy day it would blow you gas away, is it possible to weld on a calm day outside with gas? Or should you always use flux core outside? Thanks.
Yes sir calm day with mig gas. I weld gal tube out of my shed on calm days.
Sharpppppp!!!
Hell I thought the webb was going to be made of logging chain?
Awsome rack. But I get anciety to see you welding with no gloves.
Nice
Allen. Crisco an an acid brush for the jigsaw cuts. This coming from me with a plasmacam table and PM 45 and 65 !
thanks for the tip!!
yup - 45 here too - the best! I can cut 1" thick with my 45 - amazing
You did some nice work but I would like to get the measurements for the length of tubing that is for the framing of it
You have to measure it to your truck
How much for a head ache rack for a 2006 Chevy Dually?
Your good
Did you clear coat it ?
You are the shit, i watch all your videos
love your vids a true craftsman
how long has that ryobi been working?
i always thought they were crap had a couple over the years and they burn up in a couple months of light use get hot and just die
maybe i'll give it another try.....
you are skilled and seem like a good person that's the main reason i watch your vids
thanks
I like the ryobi grinders, the brushes burn up quick sometimes but just take the screw out of the side and its replaceable. for the price tho, they are pretty good
thanks maybe i'll try one
your cutting skills are top notch
hope you have a great xmas
love seeing all your animals and the vids
Superrrr
Beautiful work... the hard way, but awesome none the less. If anyone ever needed a plasma-cam or water cutter it's you! Next one, why don't you lay it out and take it to a bigger shop to be cut on a laser table? Save you loads of work and time!
thanks! a plasma table be a lot easier but some stuff I just like to see if I can do it by hand
Excellent build, but no paint or anything to protect it from the elements?
No, I wanted it to rust, it's on a Toyota now
@@Allensweldingwoodworking OK
You need to look after your Lungs young Fella God only gave you one set.SAFETY, SAFETY all ways comes first.SAFETY, SAFETY
i know this video is sorta older, but do you have good air now???
Erik Doering good air? What do you mean?
GREAT JOB ALLEN!!
what size steel plate you used..?
Thanks, its 11 gauge plate and 2"/1" tubing
good.,THANKS FOR ANSWERING..!!
kind of finish & maybe lights?
going to have it powder coated, probably won't add lights
Nice job !!! How much if u sell ?
if I sold it..probably $300-$350
Grind one of your files down to fit your sawzall
Quality.
damn.. if you had plasma cutter....
This channel would be awesome if you had a little bit better of a camera!
What size square tubing you using? 2×4 or 2×3
2”/1”
@@Allensweldingwoodworking thank you
its nice work the third brake light should have been lower otherwise great job
thanks!
Looks great, but if you ever have to replace your back glass, it will be a pain in the ass
Subaru STi just unbolt it’s from truck, that rack has been on 3 trucks now
Cnc ?
🤘👌👍