EXCELLENT Thank you for documenting the process and repeatedly showing which screws go where. Showing the actual screws and head sizes and clips is extra helpful.
Good video, straight to the point. I took the negative connection off if the battery prior to starting for fear of airbag deployment but other than that, everything went smooth. Thanks
Great Video!!! on my second CX-9 and I have been in search for answers for quite a while. I have factory HID on my '11 CX-9 GT and I want to switch to LED Plug&Play. I have the lights but dont know if I need wiring harness + ballast or not. Have any more pointers or a vid I can check out?
Thanks boss , well in this case yes you will need a connector to go to the wire that connect to the factory ballast make sure you unplug it from the ballast and connect you wire to that wire but don't connect it back to the factory ballast get H7 LED , this job will need the bumper and headlight to come out so yes you can use my video to get the job done
@@nestorautorepair Ok, so basically I will be using the power cord(dont need new ballast nor connect to factory ballast)>connector>wiring 🔌>H7 bulbs. Big thanx and appreciation.
Thank you for the video. Very helpful. My CX-9 has leveling for the headlights. Did this vehicle have that also? Just trying to figure out how that is incorporated into the headlights as I am replacing one of headlights.
Thanks for a great video. It's very helpfull. So it's impossible to replace front headlamp without removing a bumper? This is cool car, but sometimes IT drives me crazy 🤬
I have a 2008 CX-9 GT. So is the same process to replace the entire headlight assembly, or is there a separate outer cover that can be replaced without dropping the Bumper?
Hi I was wondering if you could help me out. I need to change the projector itself and change it with another one, do you know the size of the oem projector? Or what projectors fit for the low beams? Thanks in advance.
EXCELLENT Thank you for documenting the process and repeatedly showing which screws go where. Showing the actual screws and head sizes and clips is extra helpful.
Your welcome
Thanks for your message
Good video, straight to the point. I took the negative connection off if the battery prior to starting for fear of airbag deployment but other than that, everything went smooth. Thanks
Good thanks for your feedback Michael
Nestor gracias Hermano......big help. I need to replace a broken trim and I think I have to remove the bumper. Thanks for sharing!!!!
Yes sir u are welcome
Thank you. Saves me a lot of money replacing the grill myself. Thank you.
You're welcome boss thanks for your feedback
Thanks bro, this video was really helpful, knowing where, how many, and size of bolts...much appreciated!
Excellent video! My headlights are fogging up and want to replace them with new ones. Restoring headlights will last but so long.
Yes sir thanks for your feedback
Thanks for sharing, this is exactly what I needed!
You're welcome boss , thanks for your feedback
Great Video!!! on my second CX-9 and I have been in search for answers for quite a while. I have factory HID on my '11 CX-9 GT and I want to switch to LED Plug&Play. I have the lights but dont know if I need wiring harness + ballast or not. Have any more pointers or a vid I can check out?
Thanks boss , well in this case yes you will need a connector to go to the wire that connect to the factory ballast make sure you unplug it from the ballast and connect you wire to that wire but don't connect it back to the factory ballast get H7 LED , this job will need the bumper and headlight to come out so yes you can use my video to get the job done
@@nestorautorepair Ok, so basically I will be using the power cord(dont need new ballast nor connect to factory ballast)>connector>wiring 🔌>H7 bulbs. Big thanx and appreciation.
Yes sir that's all you need H7 LED or HID both will work
Thank you for the video. Very helpful. My CX-9 has leveling for the headlights. Did this vehicle have that also? Just trying to figure out how that is incorporated into the headlights as I am replacing one of headlights.
Hi thanks , I don't believe this one had it
Thanks for the vid sir! I have a bad ballast. Does the bumper have to come off to replace it?
Yes sir it need to come off I believe so
It helps immensely. Champion.
Thanks boss , thanks for your feedback
Thanks for a great video. It's very helpfull. So it's impossible to replace front headlamp without removing a bumper? This is cool car, but sometimes IT drives me crazy 🤬
You're welcome boss , and thanks for your feedback , correct bumper needs to come off first
So do you have to remove the front bumper? Also, can you do this for literally every make and model? Please? Pretty please? For me?
Not every car no only some like some Nissan Altima
I have a 2008 CX-9 GT. So is the same process to replace the entire headlight assembly, or is there a separate outer cover that can be replaced without dropping the Bumper?
Same Process sir
Wish everyone made videos this detailed !!!!
Thanks, this is an excellent video
Thanks for your feedback
Hi I was wondering if you could help me out. I need to change the projector itself and change it with another one, do you know the size of the oem projector? Or what projectors fit for the low beams? Thanks in advance.
Ohhh I honestly don't know the size
What Chad said. . . very helpful details. Thank you!
Hey thanks for the feedback
How long did it take you to take apart and put back together?
40 minutes
its suitable headlights & bumper cx9 2019 into cx9 2010?
I'm not sure if it will fix ,, I know a 2019 Toyota Highlander front bumper and grill fit the 2015
This is great, thanks for doing this video!!!
Your welcome
Very helpful 👌
Thanks Rakesh , thanks for for your feedback
Gracias amigo God Bless you.
De nada gracias igualmente
All you have to do to access the passenger side headlight bulb assembly is remove three screws and set coolant tank off to the side a little.
If I have foglights do I just need to remove the plug connectors before I remove the bumper?
Yes sir unplug it and done
@@nestorautorepair thanks, I'm doing this this week so we'll see how it goes
Excellent!
Thank you so much, this helps so much
How much is the cost for that job only for labor
$600
Damn all that work just to remove the headlights
Yes sir
Thank you
You're welcome
Yo where you got those lights at the end?
I made them got the lights off eBay
Thanks
You're welcome
Hi is this applicable for year 2011 Mazda CX 9
Hello,, Yes sir same
@@nestorautorepair Thank you and great video!
Your welcome
Thanks BOSS
Thanks you
Show me where the cranksc
I don't have a car like it here
easy to follow,pause,follow.....
Thanks