Home Assistant Active Bluetooth Proxy - Lights, Switchbots, Toothbrushes
Vložit
- čas přidán 26. 07. 2024
- The Home Assistant Devs have done it again with active bluetooth proxies to control all the things! digiblur.com/wiki/ha/#bluetooth - How to Create a proxy - • How To Make a Home Ass...
⚡Products We Use/Recommend
Amazon US - amzn.to/2YZNDeO
Amazon UK - amzn.to/2TnG2R4
Amazon CA - amzn.to/2JWsNq5
⚡Be Social!⚡
Main Website - www.digiblur.com
Discord Chat - discord.digiblur.com
Patreon - patreon.digiblur.com
Join / @digiblurdiy
Facebook - facebook.digiblur.com
Instagram - instagram.digiblur.com
Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of most purchases and helps with future video projects. Thank you!
#esp32 #bluetooth #homeassistant
00:00 Intro
1:19 ESP32-C3 and Solo
3:46 Bluetooth Compatible Devices
5:34 Bluetooth Light Testing
06:29 Closing Thoughts
07:36 The BEST Part! - Věda a technologie
Would be nice if BT Proxy supports BT pairing (with PIN code). That would open up a whole bunch of other devices (eg. Eqiva 3 radiator thermostatic valve)..
I have 3 switchbots, one turns on my Keurig, one on the espresso machine, and one on my KVM in the basement for when i forget to switch off the basement input.
I use a HA automation to "set state" to OFF, 15 or 30 minutes after turning on to mimic the auto-off feature of the coffee machines.
Super cool!
Thanks for sharing this info
I flashed a couple of AtomS3 Lite (ESPS3 chip) devices and configured them with Bluetooth Proxy active and passive. They are working pretty good so far.
Awesome! I do need to try it on a Devkit S3 now that I see that model supported.
Thanks Travis.
Are there any cool thematic lighting programs to drive the shopLEDs? Like fading cycling colors, or something for Christmas... 😏
After testing couple of flood light , I found that the only ones that work with the Bluetooth integration are the ones that work with the happy lighting app and show up as trioones , not other ones .
I bought couple that work with the duoCo strip app and they didn’t show in HA .
Keep in mind before buying , make sure the lights work with happy lighting only .
We have found a few here as well digiblur.com/wiki/ha/bluetooth-compatible-devices#lights
that bluetooth floods are looking pretty slick!
Only bad thing I can see is no security so your neighbors could control the floods if they reallllly wanted to.
@@digiblurDIY this: no security
If you have that worry then I would stick to zigbee/zwave floods.
Gonna stick with zigbee. Thanks for your insights put in this video about ble/bt. Cheers
Do you know any decent 100w outdoor floods? Gledopto has some 60 watts but they were a little too pricey.
Thanks. I have a few ESP32 around the house already doing things with esphome. Could I add this functionality to them in the yaml, but still also keep them doing what they're doing already? So multitasking.
Yes, as long as the ESP32 isn't busy with crazy sensor reading stuff or what not. Simple devices..sure..fire it away!
Great video. Thanks for keeping us in the know with new HA tech. Question on this esp device, what usb power source is recommended for it?
Just regular phone chargers work.
@@digiblurDIY Thanks, but how many volts and amps do these little boards need? I only ask because there are many different plain phone charges out there.
USB phone charger 5V even 500ma would be fine. Most you'll find now are 5V 1A which is overkill but nothing wrong with overkill.
@@digiblurDIY Thanks for clearing that.
High Troller thanks you for this video.
Thanks bro!
What’s the Wally’s addressable led light you mentioned around the 5min mark?
wallyslights.com/collections/flood-lights
Been looking for flood lights that work well with Home assistant. If you got any more info on flood, please share. thanks for the video.
Those are the two I know of right now.. There are some other zigbee or ws2812 options but a little more money and rabbit hole.
NIce guide
Thanks!
Can you do a video on how to install the proxie on a bulb with tasmota3 on a esp32-c3
Might not be bad walk through of how to do a fresh esp32 proxy. Thanks!
Hi thanks for the video, i have esp32 s3 box, i got it to use as a proxy, but i am not able to flash it with esphome, any pointers will be highly appreciated.....
I played with a couple S3 variant settings of ESPHome but it seems super buggy and ping times are through the roof. Not normal for this chipset at all. It is just way too early in development I guess.
Could i pair with any generic bluetooth lights with the proxy or does it require specific integration?
My local store mostly selling tuya bt lights
Really one of those things you have to try. I couldn't get Tuya BLE stuff to show up though.
@@digiblurDIY thanks, are you referring to tuya ble sensors only?
I’m tempted to try it out since the bt downlights are like way cheaper than yhe wifi/zigbee ones
I tried some downlights with Tuya BLE modules.
Have you found a way to use the Govee Bluetooth String lights with the BT Proxy?
I don't see those supported as of yet.
I have Melpo downlights and outdoor floods…..is there anything I can do with these?
See if they are pop up in bluetooth is really all you can do to see if they are supported.
Hey Travs, i just bought one of those floodlights on the compatible list, but for some reason the bluetooth proxy is not automatically detecting it. Any idea what I might have done wrong?
Same person in discord or?
You said you couldn't find a use for the switchbot bot? I use it to turn my humidifier on and change the levels based on the switchbot temp/humidity sensor. works will. Its a single button does all humidifier. 😁
I live in a high humidity area so we don't have those. I did use it to ring the neighbors doorbell once. That was pretty funny and useful.
Someone tried The Sylvania SMART+ Bluetooth bulb ? Those are curently 5$ for two at Dollarama (In Canada)
There are still no Ceiling wafer light that are Bluetooth that will work. I thought I saw there was. Do you have any extra info on this Travis? Thanks
I haven't seen any myself either. There are some you can load via Tuya cloudcutter and put Esphome on them.
Hi, Can i connect LD2410 to home assistant throught bluetooth proxy ESP32 to get sensor value, and can i connect many divices LD2410 ? thanks
I tried it using that sensor but it was too flakey for Bluetooth usage. Definitely needs the ESP chip to control it.
I'm curious have you replaced all your blerry stuff with this now?
For the most part yes. I still have a Blerry gateway going though for some MQTT things.
@@digiblurDIY Is there an easy way to convert the tasmota to ESPHome on devices that are mounted in the wall? I.E Lindkind switch?
As long as you aren't using the safe boot partition scheme of Tasmota you just make your Esphome bin with the setup as needed and send it over via the GUI
@@digiblurDIY Is there a generic bin file for the Linkind switch? Also it appears that HA is still not supporting the Xiaomi sensor yet. Tony's Blerry does.
For esphome? No. You need to build your own for your setup.
Yo Travs, any recommendations of which flood light on Amazon UK that will be compatible? If you please share the link then that'd be great. Cheers
Search for happy lighting app ones and see what you find.
@@digiblurDIY Thanks buddy. I did a quick search on Amazon UK and not looking too great.
Hello, do you know if the flic buttons work with the Bluetooth proxy?
I haven't heard a no or yes on this.
@@digiblurDIY thanks a lot, because i haven’t be able to connect them to proxy’s, i have the connected to the raspberry pi, but the range is really bad
Do I need to flash tasmota on the Shelly to get Bluetooth proxy? If I use the Shelly as a Bluetooth proxy, do I lose the switch capability?
Supposedly now you can use it with stock firmware. I just don't have any stock to try it.
@@digiblurDIY We can use the Bluetooth proxy and the switch?
I know you can with Esphome but also according to the release notes on HA you can do it with stock firmware on the Shelly plus devices as well.
@@digiblurDIY Thank you
How's the battery consumption on passive devices? Was that not a concern?
Been using them for a few years, the coin cell ones are okay if you cut back some power settings in PVVX on them but I do prefer the AAA sensors and just throw in rechargeables and don't worry about it.
@@digiblurDIY does the PVVX firmware help in the active setting? How does one mitigate drain in the PVVX firmware?
Apparently this Bluetooth proxy takes up a lot of memory. All my esp32's have one or more sensors etc attached to it and as a result for most of them the firmware won't install with the Bluetooth proxy activated because it exceeds the memory available. Any tips?
Also in terms of BLE devices I'd be highly interested in a Bluetooth remote with basic functionality (play, pause, volume up, volume down, next, previous) or even just a single button Bluetooth button (which I'd then use for play/pause).
I have one with a GPS chip and a sensor or two and it seems to run fine on the esp32.
@@digiblurDIY OK looks like it was a different problem. The error seemedto indicate I didn't have enough memory on the ESP32, but then I found and article stating that if you enable bluetooth on the ESP32 you need to flash it again over USB the first time (not wirelessly). That did the trick :)
Ahh yes... The partition layout is different
Still struggling with the proxy part. Have a few of the gl-s10 devices.... They aren't reliable. Not sure why
I've heard that from many folks that they have stability issues and OTA issues. Some have fixed them via forcing 10 mbit on the switch. I would try one of the ESP32 dev kit boards, like nodemcu or even M5 Stack ESP32 to start out and get your feet wet.
@@digiblurDIY I have couple of other boards to try. Just need to get time to do it. The gl are a great form factor... If we could fix stability
I have my doubts to be honest as the same code can run on the Olimex POE boards and it runs fine. Sounds almost like a hardware issue.
@@digiblurDIY but do any other devices use that ip101 Ethernet chip? Seems like they switched chips between versions.
can this be installed on a switchbot plug?
Yup. I have one running and have the config here. digiblur.com/wiki/devices/plugs/switchbot_15_amp_w1901400
The Xiaomi e-ink thermometers are great, just a pain to flash
I have only done the little smaller coin cell ones. But those were just bluetooth flashed via a couple clicks of a web browser. What model were yours?
@@digiblurDIY I've been using the XMWSDJ04MMC. Once you go e-ink it's hard to go back... 🙂
Tried installing several times but my ESP32 is never picking up any BL signals... Any ideas?
Did you add the esphome device to HA itself?
Minoxidol very effective
Razors work better.
Do i need a proxy to use bluetooth?
If your host system has bluetooth you can use that but I recommend the proxies for extended range.
nice gay parade
Halloween parade actually. Just lots of variety
@@digiblurDIY almost unsubscribed... so sick of it all.
Over a Halloween parade? Please unsub and see ya!
@@digiblurDIY ok