WE BUILT A CAR CRUSHER!
Vložit
- čas přidán 18. 03. 2022
- Finally finished the car crusher! It took longer than I thought to complete, but I think it was worth it. Let me know what you think!
🔔 Subscribe for more / hardcorefab
Visit our website: www.hardcorefab.com
Visit our TeeSpring Store: hardcore-fab.creator-spring.com/
Thanks for watching!
#carcrusher #cowboycarcrushing #cowboy_car_crushing #hardcorefab #homemade #hulksmash
#hulksmasher - Auta a dopravní prostředky
If you haven't watched it yet, the best smash is at 10:00. At least that's my favorite!
Cheers mate. That saved 10 wasted minutes👍
He smash the car in the camera!!! 🤣
@@imallowedmyopinionok2354 0
What a rescue mission for that camera lmao
Put 2 smashed cars on top of each other and smash them again please
In the early 80's my friend and I used to visit a scrapyard west of Montreal that had a similar crusher. What differed regarding efficiency between theirs and yours is the following: the pivoting point was only a few inches from the ground. As well an important factor of physics is sheer mass: the swivel structure was filled with concrete increasing the weight of dropping mass, thus the cars in a single drop would have been 12 inches high.
We got one here almost identical to yours that was built almost 35 years ago, quit using it because it took too long to cycle, had issues with the cable and winch , but most of all was unsafe due to no control after it was tripped. Also doesn't work well on vans or SUV's because it blows them out too wide. Hydraulic is really the only way to go. And eventually your hinges will fail and when it does it's not pretty.
Where can i put my ex?
Facts
Great job on the car crusher dude I want to see what it does if you stack one on top of another then drop it I wonder how far it will crush it
Me too, I was going to post the same comment. Can't wait to see this happen!
I wonder what would happen if they turn the car around so that it smashes more of the motor side of the car
EXACTLY
can you submit this to the nearest city as an option for execution? of course only for the atrocious people who deserve it.
@@EternalResonance which ones are that you know occasionally humans do make mistakes and convict the wrong person
That thing is brutal. I love it. But I almost cried when you crusher the Intrepid.
Love it. You should pour concrete in the top 6ft of it. Reduce the bounce add a few ton.
I think the winch is already pumping it’s little guts out already with the load it’s lifting already.
30k winch whole lid is less then 13K and only picking up one end. The winch is fine!
maybe sand ? concrete might crack if you dont reinforce it
That's pretty bad ass! You can crush as much of those ford's as you want! Lol
Yeah not much lost there. Lol
“”HULK MAD… HULK SMASH CARS!!!
I read you had a lot of suggestions, may I make another, turn the car around so the most weight hits the engine compartment where the most structure is. Cool build!!!
Hey Tony
Another successful build !
I would like to see a car put in with the engine facing away from the pivot as well as two cars at the same time.
Put a car in upside down.
Stand a car on end.
Put one on it's side.
I mean, sense we are playing, lets try it all !
Thanx fur the entertainment.
Now about the upcoming build with the Super Singles ?
Play Safe, Be Well
Hmmmm that does sound like a good time!
@@HardCoreFab might as well throw some semi’s in there to.
After crushing stak 2 or 3 and see how flat that gets
Make sure that if they still have running engines, you red line 'em during the crushing process. But WAIT! Let me go make some popcorn.
Cool build and looks like it works pretty good. You always impress with what you build.
The crusher is cool but that dodge boom truck is amazing. I can’t believe what some people will scrap I would love to own that thing
It's certainly an awesome attempt at building a home made crusher! Well done guys!👍😀
What happens if you stack 2 smashed cars on each other and resmash them together ? Could you get another foot shorter on each car? May be easier to stack?
Yes... this would be worth watching
Adding a bit more weight to the lid I think it would crush two cars at once.
I still think that the hight between the bed and the lid is a bit too high. The hood and trunk are not affected much by the crushing
We are planning on playing with it more soon
@@HardCoreFab You could also try tilting the car to the side and giving it one more smash. 😎
if the engines are still in the cars they probably turn intoo a wedge shape , maibe if the stack them with the noses in oposite direction the engines can embed themselfes in the trunkspace
Very cool build for sure. Looking forward to seeing how it all holds up.
Way. Way. Way cool.. liability insurance?? We don’t need no stinking liability insurance.
Stack 2 smashed cars together on it and smash
Hard to believe y’all painted it before you tested it.
Got to look fresh for the first car
I painted my vehicles before I drive them too! LOL
Works good. You could pour some concrete on there for some more weight
Very well built. I love it!!!
Thank you!
That’s awesome!!
I would look to some sort of cable release and wieght the hook so you can free spool it down because the rapid unspooling seems like that will be hard on the winch. Cool build
When the dog on the winch is disengaged the gears in the winch aren't turning so there is no stress on the winch.
I'm thinking he means like the bushings in the drum etc spinning pretty fast. Probably hurt it over time.
A quick disconnect on the hook end of the cable might prevent that. Sort of like a large car door latch you could pull with a rope on the cable hook end.
@@scubasteve7946 yes plus cable whipping at end
Very satisfying watching that car get crushed
My dad owned Anderson Auto Wrecking in Walla Walla in the late 70's early 80's. They built one similar out of old decommisioned water locks (movable dam). They plated the faces with 1" thick steel and they filled the top (moving part) and bottom with sand. It worked so well that it was shearing the heads off V8's. One day he had a bunch of railroad track that came in, so they cut it and through it in the cars before crushing. The steel scrap / shredding company in Seattle called up and the CEO flew out to see his crusher and told him never to put railroad track in the cars again. Apparently the railroad tracks really messed up the shredding machines.
His was a little different than your design, but very similar. It would winch the top up vertically, then had big hydraulic rams that would lift the pivot point and top another 6 feet or so. When he would release the pin, the top would rotate to approximately 90 before allowing the pin side to drop as well.
Hahaha yeah the shedders don't like that big thick iron in car body's!
I'm impressed- but I think it would do better if the hinge was level with the table! also if you load the cars to the end of the swing it will make em flatter!😁
I was gonna ask him the same thing why did he position the hinge pin so high off the surface you figure it would be more stable if it were attached to the floor
@@pipegang6497 that's my way of thinking! I agree 100%.
The only reason for the elevated hinge is it allows for better momentum and keeps it from binding up.
If hinge was level it wouldn't be able to crush 'flat' it would leave the cars less crushed on back side. Therefore could not stack the crushed cars.
🤷 That's just my weird little brain. Who knows 😆🙌✌
@@mikethatguy27 you are correct, plus the engine is the most un crushable thing in the car, so having it level would not work
Well it does smash cars, I deny that but thats not all flat really! It just crushes roofs! For flattening it all out, you got to raise the platform on where the car sits, so flapper comes sandwiching car in between, but because your sitting ground is way below your hinges mechanism, it doesn't fully crush properly.
Its not hard to make, just a shorter panel to leave space for hinges to close in normally and just laying smasher more firmly and tighter on the crushed car. Aside from all above... Crushed cars looked in a real good shape though to be crushed, Except for last one!
You will most likely run in to the problem that the lever arm has to be double the length and double the weight to flatten it completly then.
Cause the lever gets momentum loss as soon as it makes contact , now the top part of the lever (fastest most momentum) makes contact first with a lower hinge the slowest traveling part would make contact first and would slow the smasher down giving it less momentum and less power.
It only has to crush the roof down to make it a level base to stack other crushed cars on top so they can be stacked on top of one another on the truck.
Hinge needs to be closer to the table , but not level, say 6"-12", good video
First video I've watched on this channel. Can't wait to watch more👍
Stack 2 smashed cars then smash them again! Lol
Definitely turnd out cool. Could watch it work all day!
A paint can or watermelon on each would be cool LOL
Could hang a few shirts across the back wall and have a new merch line 😁
As my Grandpa use to always tell me (every time he saw me, it seemed); "If you're going to waste your life, you might as well have fun while you're at it."
100%
I was going to say that you guys should keep the car off center to the hinges to reduce the leverage on the hinges 🧐👍 great job Anthony 😎
That’s Excellent Job Question will those cars look Wide when I get crushed will they fit on a tractor trailer without all the hanging
None that we have crushed so far would be too wide to go on a truck. Having that said I think you would need to push the doors in on a pick up or a Van to keep them from being too wide
Did you get the go-pro out?LOL!
Lol Surprisingly it was unscathed
My old boss built a crusher like that but he used two hydraulic cylinders off a old grain truck he got in. It to this day works very well. Great job guys!
You never sees to impress me from Belding cars to crushing them lol
Seize
@@brandonsciulli774 If you're gonna act like you're smarter than someone else and correct they're spelling, you ought to know how to spell it yourself. The word is "cease", As in "cease and desist"
@@bobd9193 hehehe
best thing that could happen to a ford
Yeah because the chevys are all gone rusted to pc or crushed
I drove a Chevrolet for a while… Then I got a job!
The panther platform cars are insanely reliable lol
Obviously a genuine millenial or the parent of one.😂
100%
Wow that works really well. Good job!
Great job. Works better than I thought it would.
Hey, give him credit, at least he was out doing something not sitting on your dead dupas doing nothing.
Car-nage! Awesome
GEEEZ!!!that's awesome! That "wrecker truck" is a winch truck with gin poles, it's got oddly mounted poles but it's super cool
The bed is junk but the rest is sweet!
Congrats Tony on building the Hulksmasher to show us how it smashes cars. agree that the cars need to be higher to flat it more. cool video.
Great idea . Yup my thought was the pivot point why so high however .. flatten a car or 2 then double stack and flatten them with one on top of the other. Should have a good result ..
Nice Job! I'm in my fifties now but when I was a teenager, I drew up plans for a crusher just like this design. One correction I see is you'll need to push the doors in so it will fit on a semi trailer correctly. Overall, I'm jealous that you have this crusher and I don't.
It'll buff out... LOL! Seriously, how has this video not had 1M views?!
😂😂😂😂
kevat310, it is not because there are not enough maroons.
Sickeningly satisfying. LOL. TOO COOL GUYS!
That was too cool. Great job guys 👍👍🇨🇱
That has to be cheaper than running a hydraulic press type crusher. Maybe even quicker as well
100%
That's awesome. You should put a car in on its side to see how skinny it can get
Smash all the glass with the loader, that way most of the mess will be inside the car, and , I think it’ll smash a little bit harder….👍👍👍🔥👀😎🐈
For much better results, remove the tires, open the windows, smash the front windshield and take off the gas cap before smashing. Less pneumatic counterforce to deal with this way.
Got here by accident stayed for duration cause content!! Awesome guys
Awesome
Damn that works great and the cost vs. buying one you might saved $400.K and it's well worth lot more then buying one ! P.S. You just got another follower & i shared it to my twitter & gab followers !
Thanks Jammer! Yeah only a fraction of the cost of a factory one. So help me out I'm not cool enough to know what Gab is
Hell ya looks fun !
"If you build it, they will come"
Someone needs to paint a lime green palm on the underside.
As a ford guy was pretty cool watching him crush that dodge !! But every car brand has their good ones and not so good ones. 😊😊😊😊😊😊😊
100%
The use of kinetic stored energy is a novel elegant approach. Be mindful of forces on hinge point..and safety when its up
That was excellent! Nice job 👍
when the back plate slid into position, all I could think of is Jim Carrey saying "Like a glove!"
That’s wild!
Q. why not place the cars in backwards? Would the engine block stop the "SMASHER"? Thanks for entertaining us!
Glad you enjoyed it
Awesome build!
Absolutely awesome!💯🙌✌
Male the hinge side closer to the bottom for more clamping action. The gap caused by having the hinge so high uo doesn't help compress the front. You could actually put more hinge points on the face of the hinge block and make it sort of adjustable if needed.
If we where going to work it that could be an option but it's just a toy
What a satisfying crush guys love.love that beast u made
If it was me..... I would add a hydraulic cylinder onto a pin lock mechanism to hold the ram in the upright position. And then release the cable from the lid. You have the hydraulic setup already. Add 1 valve. And some hoses. Pull lever. Pin gets pulled out which releases hulk smash. Cables under high speed whipping around open areas like that is my main concern. Love the build.
That's awesome man!!!!
And add a quick release to the end of the cable. Letting the winch free spool adds a lot more danger. If the cable snagged the result could be catastrophic
that is really really cool mate, great work
I am a happier man now and would love to see 2 cars stacked up for a second crush. Such satisfying entertainment.
This is the single best video on CZcams
Lol
AWESOME!
Love it!!! Good job!!
Great Car crushers mate, nice build.
In one of my past jobs i had to work with a lot of smashed glass, please make sure you guys are at least using a P2 mask to reduce the risk of Silicosis.
That thing is merciless… I love it
The hinge could do with being a little lower good job though.
This thing would be useful for getting rid of all the so called classic cars. The type of cars which were never any good new and haven't improved with age
..
That's Cool as Hell, I think Cowboy Car Crushing would Love this Crusher.
I've worked in the salvage business for years. And I think thing is awesome!!! Does a out standing job! I'd Bee proud to have or use a piece of equipment like that. My hat off to y'all.
Thank you!
Thanks man!
I think it works pretty damn good. 👍
Thanks
Now stack 2 of them with one facing each way so the engines will equalize the crush.. That should be GREAT!!!!
Check out the second crusher video we did that!
That's a much better crush with the tires and wheels off the car!!
What a great build . Looking in from Ireland 🇮🇪
Pancaked em. Should make for easy stacking.
Very clever!
That whole thing whips around a lot... Long as I don't have to be around it, you do you Pal.
5 ton wrecker truck is awesome!
Big props to the camera man that sat in the car at the end🙏
LOL camera yes man NO!
That was awesome
We don't have Bojangles in Texas. Every time I take a fall trip where they have a store i get it. Love it. Last fall i got Bo Jangles and got very sick. Even my dogs did. Never again. So sad.
How to make instant Lowriders. You should've included War's lowrider song in the background of the video 😅
🤣🤣🤣🤣 yes I should have
She still has a bit of flex which will eventually wear out them hinges . I would just run a little more support in there. Thats just me. But awesome rig!
Cool stuff. Always fun to smash some things. Happy Smashing!
What a shame, I almost cried to see that beautiful Dodge Intrepid crushed ...!
I think i would load the cars with the engine towards the end of the smasher. I would also make another maybe 6"-10" plate to place on the platform under smaller cars to smash them even flatter since the hinge is so high. That or spin the cars around and hit them a second time might even work.
maybe have the hinge capable of dropping as it falls.
@@1stontario Would be easier and safer to just remake the hinge in such a way its adjustable and able to move up or down for thicker/thinner vehicles. That hinge needs to be rigid as possible to be safe as possible.
The crushed cars reminds me Panthermobile.... 😂
Great video! Thanks for sharing.
Thanks for watching!
your diagonals supporting the snatch block frame need x bracing between one another. That's a lot of weight oscillating, those welds will break
My welding teacher way back in 1989 he was old he showed pictures of him in the late 1920's and and 30's standing on sky scrapers welding giant steel I-beams together no fall protection. He tell us how they would sit on a 12-15 " wide steel eating lunch 20-30 stores up in the air. I wish I had learned more about it back then being a dumb 18 year old kid didn't think much about history I do now. I asked how often did someone fall he said it wasn't that often if it happened it was usually someone new. Older guys got used to it walking on these steel beams.
Now build a silicone bare foot around the crush plate (add a few tons weight) and you have giant(ess) crushing cars.