M2C RACING X SERIES MOTOR MOUNT SYSTEM FOR 800KV 1100KV AND MORE!
Vložit
- čas přidán 25. 08. 2024
- We are so excited to finally release these parts for the xmaxx!
We have tested and tested and they're ready to put the M2C RACING name on them.
Not just tough, M2C TOUGH!
Great detailed rundown of the New X-series motor Mount system Mitch. Really appreciate the Shout-out guys. I was super pumped for this to finally drop to the public and let the Xmaxx guys experience it for themselves. Very well done Mitch and Avery for another awesome innovation.
Now this is FIRE. LOVING the design. GLAD I listened and waited for my mount option.👌🙏💯
I got the kit w/ esc top plate, mount and slide, haven’t installed into the XMaxx yet but did mount the 1100 motor to the slide, ok, which bolts/screws are used for the sides of the motor mount slide? (keeping the slide from going up and down)
It’s probably a silly question but the heads of all the screws are wider than the slot on the sides of the mount.
@@jessejames2546 should be button Head screws brother. If you can bolt 4 screws even better. Two at the bottom and two on the top. Let me know
@@CommanderAstigRC all good, the 4mm cap heads came with washers so I guess I just need bolts to mount the motor to the slide plate, thanks 🤘
Yes
Thanks M2C for what you do. I have 5 arrma rc cars that are all out M2C built. I never would buy an x maxx till now, and I just got my x maxx beefcake kit today. These parts, you guys, keep pushing out just keep getting better and better.
Think I'm in love 😍😍. Sorry Mr looper. M2C for the win. 💪💪💪
Oh yes very nice indeed guys, a lot of time and effort has clearly gone into the design and testing of this product. Thanks to the M2C testers and M2C for developing this unit, camt wait for these to hit Aussie shores!!
Awesome new system Mitch! 🤩🤩
Great design and presentation Mitch 🤗. When the Wizard speaks, I'm all ears. 🍻😎💪👊👊
The MAN, The Myth, The LEGEND. Been waiting for this. Scooped one up IMMEDIATELY. I’m VERY EXCITED.
An honorable mention to the X-Series Sway bars Mr.Looper is a genius.
Awsome bit of kit...much needed along with the new m2c centre drive shaft! Can't wait to see whats next...👍💪👍🙂
glad to see m2c drop a item i wanted to get for my xmaxx when i gert one and i got one about 2 weeks ago now, i would love to see m2c drop out some spiral cut xmaxx gears or just better gears for those who run 800kv, i personally am going all 800kv or im going to hang back with the 1650 just for the reason of i can.
Seems like the best system for this
Thank you sir, I have ordered one just now.
Mitch, one day you will fix all the weak spots on all trucks in every band name rc, so no one have a headache to worry about.😉👍
You sold me on this mount. Looking forward to ordering quite a few parts from you guys soon. 🙂
I just ordered this setup a few days ago. I can’t wait to get it. My XMAXX has had constant issues with gear mesh and the VXL-8S dying on me. I’m going to be switching to a Spektrum 160A ESC with a Surpass Hobby 800kV motor with this M2C upgrade.
Off topic but I also ordered a Kraton 1:5 chassis with motor mount that will be here with me tomorrow. I already have the rest of your K8S upgrades for it so I know it will be the end all be all transformation to a tank! 😄
Naild it buddy!!!!
Great info and nice system! Thanks 🔥
Awesome, I'll definitely be picking one of these mounts up.
Would be interested to see if this system fits with your Leopard Hobby Xmaxx setup.
GREAT WORK
Thought out brace and mount for the motor and esc. Have to order it.
Must have I’ve noticed my Motor mount has some play.
I love this design especially for the ESC. IS there any heatsoak issues or bending issues from tough bashing?
When is this available to the uk.
if you guys would make something that would stop the body from popping off, especially the maxx v2. that would be awesome. for some reason my v2 ejects the body waay to frequently. not sure if this is the extra inch they gave it but it flexes the body right off almost every jump.
I wish you could integrate a top mount for a 1/5 scale servo onto that brace 🤔🙏🙏
Any idea when the 2 piece driveshaft will be coming out?
hi nice stuff over there can you ship them to dubai?
So you will run the almighty xmaxx bruh?
@@JudeKhaleelGaming will give it try yes after these upgrades
Hello!, can you please 🙏 make a matching main gear cover, greetings from Austria/Falco !
Hello from germany. Fit the hobbywing 1650kv with stock pinions?
Best regards
I’m interested in using this system with the Leopard Hobby 58113 (1050kv) or the Leopard Hobby 5892 (1200KV) possibly with MOD 1.5 30 pinion & 35 Spur with MAX 6 ESC. Just wondering if this brace/mount system could accommodate this setup in an Xmaxx. Thanks in advance. Chris.
What are the size of the screws used in the motor slide? I need to order more. I believe they’re 4x16 bcs but I’m not 100% sure
Its probably too early to ask
But, chassis?
Yes! Preferably with easier to access center diff. And a spot to mount the servo that isn’t so outrageous.. basically, we want an M2C RC car..
Hi I would like to know if this product is still in stock.
Can I run the hw 800kv motor with this setup
yes!
So will this fit the 2028 castle motor and the xlx2? Bc it looks like your using the shorter HW 1100kv which is shorter than the 2028 1100kv
xlx2 can be rotated 180 to make more room check out bars&tone youtube channel for his setup and awesome bashing!!
Holes don't line up for the castle 2828 1100kv had to do a bit of drilling to make it work need a motor plate with correct hole pattern hopefully they come out with one.
No problem with esc mount tho
So now you make this for the xmaxx when are you going to design a chassis that is worth even buying one of these trucks cause the chassis flat out stinks an the mystery click