BuWizz App set-up and Advance Functionality
Vložit
- čas přidán 5. 08. 2024
- Chapters:
00:31 - BuWizz App and manager
03:38 - Creating and sharing custom profiles
10:51 - Gauges
13:10 - Wi-Fi camera
15:11 - Advanced functionality - Power curves
18:07 - Advanced functionality - Ramp function
21:02 - Advanced functionality - Tracked steering module
23:25 - Advanced functionality - Center steering module
31:38 - Conclusion
What is BuWizz 3.0 Pro?
BuWizz 3.0 Pro is a compact, high-performance remote controller for models made of LEGO® bricks. Powering the motors with embedded rechargeable Li-Po battery it enables complex large scale model cars to reach unprecedented speeds.
Power, acceleration, inclination and cornering G-forces can be shown on-screen thanks to 3-axis acceleration and motor current sensors inside BuWizz. With easy to use fully customizable iOS and Android app, BuWizz turns a smartphone into precision controller using Bluetooth® technology.
Website: www.buwizz.com
Facebook: / buwizzbrick
Twitter: / buwizzbrick
Instagram: / buwizzbrick
LEGO® is the trademark of The LEGO Group, which does not sponsor,
authorize or endorse us or this product in any way. - Zábava
When will you guys finally make an RC receiver to plug into your BuWizz bricks so they can be controlled with an actual usable RC Controller?
Great job on the tutorial, I finally ordered the BuWizz 3.0 and motor since it was on sale. Can't wait to check it out!
That ramp function seems great for aircraft.
The tutorial on centered steering is very helpful, thanks!
Very good video! Thank you!
What is the best way to connect 4 x PF M motor for drive and 1 x PF Servo motor for steering in a BuWizz system? This is for a 4 segment articulated 8x8 crawler.
good video, but I still have a problem. I have 2 buwizz 3.0 connected to each one, I have one buwizz motor connected. The application often shows me only one motor for the curent motor and voltsgr batteries. I have to redstart the batteries many times or play the firmware so that it shows both motors.. also during servo calibration many times it happens that the calibration fails. Where could the problem be? I do everything correctly
please add a buwizz battery level gauge
Why it doesn't works with two buwizz motors?
Is there any way to contemporaneously connect BuWizz 2.0 and BuWizz 3.0 in the app? I want to use both batteries in my model.
@buwizz what do you do if the calibration isn't working for centre steer? Mine goes right then left then leaves it full left stating the calibration is finished but it doesn't work.
thanks for these videos, one question, "offset from steering max" keeps resetting everytime I open the centering settings page, is it normal?
when I go back to the start menu the L-motor I have set for steering turns beond what the steering is limited to
(BuWizz 3.0)
PLZ help
Very helpfull video. Recently bought 2 buwizz 2.0 but the ramp fuction doesnt work, is it only available for the 3.0?
Same here, the ramp function is not working with my 2.0 devices. Why is it available in the controls?
I have 3.0 pro and 2 motors and i am very happy but its 1 year old things and for now its possible to make something better like buwizz 4.0 please work on it
I really hope there are Chinese subtitles
Wher can buy Wi-Fi camera
HELP! My buwizz 2.0 light is red and Flashing Really fast what do I do??
Let it discharge completely. It'll take a few days. Once it's drained, recharge it should be OK.
@@shroomzzz ok. I just read something about it on Buwizz instructions online. It Needs a firmware Update, I think it is when the company needs to update the Buwizz programming, App Software or Or Firmware. I'll reach out to some more youtubers to get more opinions. Thanks for the help.
yeah i dont want to use a touch screen app i want to plug and play with my Bluetooth controller
Forêt one toi watch