Our system will be a little more hand fed. We use the Mount Baker jaw to take the big stuff down to gravel then use our chain crusher and a Keene RC-46 roller mill to get it to 100-200 mesh.
So much flour going out in the dust ... Might want to Chang the drop height from belt to hopper or even do an entrance chute for the belt to end in ... Second belt drops right in close ... You use surfactant in the water ???
Hello,we supply gold process machine, such as shaking table , click here for factory price: www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
We have three problems with equipment. Weight, site accessibility and water. Water is critical. We have to move it up a 3600' desert mountain using a UTV or Toyota Tacoma 4x4. The "roads" are dangerous, rocky and steep. Extreme 4x4 country. It took us a year to find our way up and repair the trails with picks and shovels. Three attempts to move the jaw crusher intact failed. On one such attempt, we rolled a 4x4 truck. Had to move the jaw one price at a time and reassemble it on site. We got our Keene RC-46 up in one attempt, though we burned up a set of truck tires doing it. The tires on the Commander aren't much better off. We have to run material on site. Now that we are established up there, it's simple. Show up, mine, process.
can this kind of plant be used in processing cobalt to green powder? what will it cost? thanks for your response and please give me the best place to contact you.
At first this may seem redicululess and fiscally impossible but give the extreme location of your mining operation have you ever explored the possibility of renting a helicopter to haul your over sized and bulky items in. I have some experience in this area. It's not cheap, but given the amount of work and freight that can be moved in a very short period of time it's not always as prohibitive as at first assumed to be. First you truck all you material as reasonably close as possible. Second planning way ahead you often can schedule a large helicopter for a very short period of time with only be minimal of ferrying time. Many of the large helicopters that are used for firefighting, line tower erection and so are are scheduled to fly a minimal distance between jobs all over a region they operate in. Freight hauling helicopters don't fly clear across the country to do one job and then fly back, instead they are constantly scheduled in a certain region to minimise the ferry distance. We utilized an Erickson Sky-Crane to fly a bulldozer in three parts, a mid sized excavator, and a skid-stear 22 nautical miles from the nearest accessible road into a site surrounded by a wilderness area. The helicopter had been in Montana fighting fires, to Spokane for tower erection, to Missoula for a radio antenna repair to Riggins for some bridge work, to us, on to Boise, and God only knows where until eventually they were back in McMinnville Oregon their home base. Later smaller helicopters were utilized to fly in structural insulated panels (SIP'S) for cabins in a wilderness area, four Kawasaki Mules, and two John Deere tractors using several different sizes helicopters. So it may not be as costly as you think and you could have all your machines on site in one morning!
@@scottpecora371 - That's some great Tips! Not just for Mining, but for other things! And with "Personal Drones" coming, not even a 4WD, would be needed at your Off Grid Cabin, or Mansion! (Remember, most Castles were built "Off Grid", too!)
Good for you. How are your operations? Any luck with the gold? We too are looking at the complete 2t/h turnkey Plant from Mt Baker for a claim in British Columbia. I love the baby shaker table.
We attempted to drywash our crushed ore ... And we still haven't given up on that. He have recovered gold that way and the tailings were clear of gold. Drywashing still makes sense to me, because, after all, it is the desert.
3:43 is it possible there's valuable minerals in that stuff that's flying away? don't know what to call it. it's not smoke or vapor, or is it vapor?either or seems like tons of it fly's away over the weeks and months.
This small scale mining is supplied by Mont Baker Mining and Metal. If you are interested in buying a plant and would like more info. Please visit www.mbmmllc.com or www.criticalsupply.ca
Sam Elliot, guess you know mining very well and i would like invite you to Ghana.There are concession but i don't money to buy those machines.Bro if interested lets link up +233244367912 whatsapp or isaachammond93@gmail.com
Lads, hearing protection is good. Helps you be able to hear your kids and grandkids down the track. That dust will kill you. Need to look after yourselves.
I know our jaw crusher is performing flawlessly. The only reason I don't own the whole line yet is weight and footprint. We work on site on Arizona and getting up those old steep, washed out haul roads is a chore.
@@criticalsupply1871 hallo i need small scalle gold mining equipments without convayor belt and huppers only jow crusher and hammur mill and sluice box and shackin table 5ton/h thanks
Hello,we supply gold process machine, such as shaking table , click here for factory price: www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
What is gold ore flotation processing plant? What are the plants and machinery involved in gold ore mining and processing? get catalog via www.bestjawcrusher.com/products/ore_beneficiation/?wua
To much vibration in the first conveyor a guy should just mount the crusher above the second conveyor and eliminate the first one right off the bat also is this where they build these things and that's there water recirculation plant that's ridiculous kiddie pools build something correct and permanent for video purposes sorry but I will keep building my own equipment
Hello,we supply gold process machine, such as shaking table , click here for factory price: www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
Have you thought of gravity concentrators? Falcon concentrator/Sepro makes the little one 0-2t/h and 0-10t/h (www.iconcentrator.com). Can recover 15-20 microns (below 400 mesh).
i realize that hard rock mining is sexy and that urban mining is not but 100 lb of chips is likely to yelled 2 or more oz of gold possibly much more if they are high grade chips and for every hard rock miner there are 100 hobbyist urban miners that need much smaller equipment 10 lb an hr may be a lot for an automated system that i can drop 20 or 50 lb of chips and just lit run 3000 dollars is a lot for gravity separation if at most i am running a few hundred lb a month.mining gold plated pins and gold containing chips is much higher grade oar than is mined almost any where else.
Hello, thank you for your interest. We can send you brochure to select your equipment and then provide you with a quote of the selected equipment. The equipment can be shipped to you. Please contact us: contact@sonkocanada.ca Person: Seydou
get 【price & details】 of 【ore processing plant】 price and details: www.hxjqmachine.com/pro/beneficiation_production_line.html?cjj&y whtsapp: +8618317777761
Happy New Year. Our Turn-key system allows the recovery of up to 95% of the free milling gold down to 325 mesh, without mercury, leeching, or flotation. So depending on how much gold you have in the material to be processed, we can recover up to 95% of the free gold - Liberated gold.
@@criticalsupply1871 Hi, could you kindly send me a quote for this unit? What is its processing capacity? Do you have larger ones? Kindly send a quote to elkington.andrews@gmail.com Thanks!
Hello,we supply gold process machine, such as shaking table , click here for factory price: www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
So, am I to assume that yours is the best? Even if it was, who would buy from you after reading how unprofessional you are. I am a firm believer in how a person acts is clear indication of his/her quality. I love the professional, and considerate response from Critical Supply.
@@jameskarimi6824 Hello,we supply gold process machine, such as shaking table , click here for factory price: www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
I LOVE IT! Rei do garimpo from Brazil.❤⛏⛏⛏
Our system will be a little more hand fed. We use the Mount Baker jaw to take the big stuff down to gravel then use our chain crusher and a Keene RC-46 roller mill to get it to 100-200 mesh.
Excellent
So much flour going out in the dust ... Might want to Chang the drop height from belt to hopper or even do an entrance chute for the belt to end in ... Second belt drops right in close ... You use surfactant in the water ???
Hello,we supply gold process machine, such as shaking table , click here for factory price:
www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
We have three problems with equipment. Weight, site accessibility and water. Water is critical. We have to move it up a 3600' desert mountain using a UTV or Toyota Tacoma 4x4. The "roads" are dangerous, rocky and steep. Extreme 4x4 country. It took us a year to find our way up and repair the trails with picks and shovels. Three attempts to move the jaw crusher intact failed. On one such attempt, we rolled a 4x4 truck. Had to move the jaw one price at a time and reassemble it on site. We got our Keene RC-46 up in one attempt, though we burned up a set of truck tires doing it. The tires on the Commander aren't much better off. We have to run material on site. Now that we are established up there, it's simple. Show up, mine, process.
can this kind of plant be used in processing cobalt to green powder?
what will it cost?
thanks for your response and please give me the best place to contact you.
At first this may seem redicululess and fiscally impossible but give the extreme location of your mining operation have you ever explored the possibility of renting a helicopter to haul your over sized and bulky items in.
I have some experience in this area. It's not cheap, but given the amount of work and freight that can be moved in a very short period of time it's not always as prohibitive as at first assumed to be. First you truck all you material as reasonably close as possible. Second planning way ahead you often can schedule a large helicopter for a very short period of time with only be minimal of ferrying time. Many of the large helicopters that are used for firefighting, line tower erection and so are are scheduled to fly a minimal distance between jobs all over a region they operate in. Freight hauling helicopters don't fly clear across the country to do one job and then fly back, instead they are constantly scheduled in a certain region to minimise the ferry distance. We utilized an Erickson Sky-Crane to fly a bulldozer in three parts, a mid sized excavator, and a skid-stear 22 nautical miles from the nearest accessible road into a site surrounded by a wilderness area. The helicopter had been in Montana fighting fires, to Spokane for tower erection, to Missoula for a radio antenna repair to Riggins for some bridge work, to us, on to Boise, and God only knows where until eventually they were back in McMinnville Oregon their home base. Later smaller helicopters were utilized to fly in structural insulated panels (SIP'S) for cabins in a wilderness area, four Kawasaki Mules, and two John Deere tractors using several different sizes helicopters. So it may not be as costly as you think and you could have all your machines on site in one morning!
@@scottpecora371 - That's some great Tips! Not just for Mining, but for other things! And with "Personal Drones" coming, not even a 4WD, would be needed at your Off Grid Cabin, or Mansion! (Remember, most Castles were built "Off Grid", too!)
cool! So what was the price to ge the heli to move your stuff around?
Gold. small gold. Two Arizona claims. Bought the crusher from Mount Baker last year.
Good for you. How are your operations? Any luck with the gold?
We too are looking at the complete 2t/h turnkey Plant from Mt Baker for a claim in British Columbia. I love the baby shaker table.
Good and latest technology
Finding some. Mostly in the iron ore. Some in the manganese oxides.
We attempted to drywash our crushed ore ... And we still haven't given up on that. He have recovered gold that way and the tailings were clear of gold. Drywashing still makes sense to me, because, after all, it is the desert.
Yes, you are right. I missed that part. Good luck then.
how does dry washing work? ps loved you in road house.
3:43 is it possible there's valuable minerals in that stuff that's flying away? don't know what to call it. it's not smoke or vapor, or is it vapor?either or seems like tons of it fly's away over the weeks and months.
This small scale mining is supplied by Mont Baker Mining and Metal.
If you are interested in buying a plant and would like more info. Please visit www.mbmmllc.com or www.criticalsupply.ca
We are probably going to use an RP-4 because of weight considerations. Extremely steep, rocky grades to cross.
Sam Elliot, guess you know mining very well and i would like invite you to Ghana.There are concession but i don't money to buy those machines.Bro if interested lets link up +233244367912 whatsapp or isaachammond93@gmail.com
Lads, hearing protection is good. Helps you be able to hear your kids and grandkids down the track. That dust will kill you. Need to look after yourselves.
It needs dust suppression measure to be put in place
I know our jaw crusher is performing flawlessly. The only reason I don't own the whole line yet is weight and footprint. We work on site on Arizona and getting up those old steep, washed out haul roads is a chore.
Good to hear. How big is your operation? Is this for Gold?
love it
very neat
3:35 What's the chance of losing fine gold in that dust? Too heavy to get blown around?
we are gold small hammer mill, shaking table manufacturer, click here for price: www.fotemining.com/gold_shaking_table.html?wmf qbusiness6@gmail.com
YeeeeeeeHaaaaaaa
How much does this plant cost ? Its a lovely plant
Have you considered Elling your concentration table plans
Will it separate galena from host rock?
www.bestjawcrusher.com/products/ball_mill/?wuy, we are manufacturer for more than 35 years
Would have been nice to see what collected on the table.
Pleasee watch this video.
mbmmllc.com/product/turn-key-ore-processor/
@@criticalsupply1871 hallo i need small scalle gold mining equipments without convayor belt and huppers only jow crusher and hammur mill and sluice box and shackin table 5ton/h thanks
@@asadseid5630 Hi Asad seid, please send the bill to and ship to information to our e-mail: contact@sonkocanada.ca
Thank you for your interest.
Whats the price of this little gem?
Hello,we supply gold process machine, such as shaking table , click here for factory price:
www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
what will you do with the rubbish sand? selling to concrete factories or something
This is Jaw Crusher & Cone Crusher
It is an impact mill and a jaw crusher. No cone crusher.
What is gold ore flotation processing plant?
What are the plants and machinery involved in gold ore mining and processing?
get catalog via www.bestjawcrusher.com/products/ore_beneficiation/?wua
Whats the whole cost of the milling plant? How can I acquire that.
www.mbmmllc.com/product/mining-turn-key-system/
www.bestjawcrusher.com/products/ball_mill/?wuy, we are manufacturer for more than 35 years
To much vibration in the first conveyor a guy should just mount the crusher above the second conveyor and eliminate the first one right off the bat also is this where they build these things and that's there water recirculation plant that's ridiculous kiddie pools build something correct and permanent for video purposes sorry but I will keep building my own equipment
Quanto custa um kit desse ? sem essa mesa que jorra água .
Hello,we supply gold process machine, such as shaking table , click here for factory price:
www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
We use a Gold Cube to sluice.
Have you thought of gravity concentrators? Falcon concentrator/Sepro makes the little one 0-2t/h and 0-10t/h (www.iconcentrator.com). Can recover 15-20 microns (below 400 mesh).
A good way to loose fine gold. A proven loser of fine gold.
i realize that hard rock mining is sexy and that urban mining is not but 100 lb of chips is likely to yelled 2 or more oz of gold possibly much more if they are high grade chips and for every hard rock miner there are 100 hobbyist urban miners that need much smaller equipment 10 lb an hr may be a lot for an automated system that i can drop 20 or 50 lb of chips and just lit run 3000 dollars is a lot for gravity separation if at most i am running a few hundred lb a month.mining gold plated pins and gold containing chips is much higher grade oar than is mined almost any where else.
100 bls. of chips WILL NOT yield 2 ozs. of gold. I am an assayer and I have processed chips a number of times. NO WAY.
How to get this equipment? And how much is it?
Hello, thank you for your interest. We can send you brochure to select your equipment and then provide you with a quote of the selected equipment.
The equipment can be shipped to you.
Please contact us:
contact@sonkocanada.ca
Person: Seydou
get 【price & details】 of 【ore processing plant】 price and details: www.hxjqmachine.com/pro/beneficiation_production_line.html?cjj&y whtsapp: +8618317777761
HOW MUCH GOLD DO YOU NORMALLY GET IN A DAY ?
Happy New Year.
Our Turn-key system allows the recovery of up to 95% of the free milling gold down to 325 mesh, without mercury, leeching, or flotation.
So depending on how much gold you have in the material to be processed, we can recover up to 95% of the free gold - Liberated gold.
What type of mineral and grade do you have?
www.bestjawcrusher.com/products/ball_mill/?wuy, we are manufacturer for more than 35 years
It would have been REALLY great to see if you actually got any gold, I've seen machinery run before......
I call this small-scale gold concentrator.
You may be right. It really works.
You are correct.
I have 72 hecars in tanzania have percentge 12 gram/ton looking for partnership
How much?
I would like to know the company in charge of the sale of this machine. Any help?
Mt Baker Mining and metal. We represent them and maybe able to help.
@@criticalsupply1871 OK Can you give me a quote or price on that set of equipment?
Hi Kenneth, please shoot me an e-mail at: contact@sonkocanada.ca will revert back with a quote. Thank you.
@@criticalsupply1871 Kindly send us a quotation for the equipment @ Niamondenterprise@gmail.com.
Best Regards
@@criticalsupply1871 Hi, could you kindly send me a quote for this unit? What is its processing capacity? Do you have larger ones? Kindly send a quote to elkington.andrews@gmail.com
Thanks!
How much for this system,boss
you dont want it.. look how that conveyor twists.. it wont last a month. @2:25 best is to disconnect from crusher
www.bestjawcrusher.com/products/ball_mill/?wuy, we are manufacturer for more than 35 years
Hello,we supply gold process machine, such as shaking table , click here for factory price:
www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com
Hi
I didn't see your mitrel
¿Small? WTF xD
Mr baker can you contact me
How long do you think that conveyor will last shaking like that? Probably not much longer than the Chinese piece of crap crushers and equipment.
This is quality equipment with warranty. Other than the normal wear, it should like as long as you take care of it.
It should like as long as you take care of it? Uhhh, I think NOT! HAHA! Garbage.
So, am I to assume that yours is the best?
Even if it was, who would buy from you after reading how unprofessional you are.
I am a firm believer in how a person acts is clear indication of his/her quality. I love the professional, and considerate response from Critical Supply.
What difference does it make to you?
Are you paying for it?
Longer than the shit you're selling.
How to get this equipment? And how much is it?
www.bestjawcrusher.com/products/ball_mill/?wuy, we are manufacturer for more than 35 years
Send me more details and photos to pointerkenya@yahoo.com
@@jameskarimi6824 Hello,we supply gold process machine, such as shaking table , click here for factory price:
www.fotemining.com/gold_shaking_table.html?wmf My whatsapp +8613027712526 qbusiness6@gmail.com