Fiberglass Canoe Repair | Canoe Restoration Segment 1
Vložit
- čas přidán 10. 08. 2019
- This is segment 1 of my canoe restoration where I clean out the cracked fiberglass and replace it with new fiberglass and then fill in all the scratches on the bottom of the canoe before painting it.
For the full restoration summary see the link below:
• Canoe Restoration | Th...
To support the channel, below are some of the tools, equipment, and products used in the restoration and filming of this restoration along with Amazon affiliate links to them.
Rust-Oleum Protective Enamel Paint - amzn.to/2SwxFSO
Epifanes Clear Varnish - amzn.to/2Sv73BP
Bondo 3M All Purpose Fiberglass Resin - amzn.to/2JZRWfw
Bondo Fiberglass Cloth - amzn.to/2Y3w5y0
Bondo Fiberglass Mat - amzn.to/2XYUQuT
Bondo All Purpose Putty - amzn.to/2LAJfvt
Music from Epidemic Sound www.epidemicsound.com - Jak na to + styl
![How to get BACK IN when your Canoe tips over [SOLO]](/img/n.gif)
For best results, and less Bondo later, you can pull off the edges of the mat so it no longer has a hard edge and is thinner along its outter perimeter. Just grab the edge of the fiberglass with your gloved fingers, pinch, and pull. Do in small bits all the way around your piece and then lay it will up with resin. If you have a hole that requires significant build-up, use multiple, small pieces prepped as described above and overlap them over one another, making sure to cross-cross the mat’s primary weave direction for the best strength. Do this until your surface is slightly proud of the existing, and thinner along the edge of the repaired area. Then carefully sand back to the original shape. When you get close to the final shape, swap your sandpaper around a wooden block as to not dish out the new surface and fare your repair into the existing contour lines.
This really empowers me to take this DIY canoe repair project and continue restoring and valuing craftsmanship. Beautiful paint job on the canoe!
I've gotten self a canoe that's over 20 years old and has traveled from SA (where I'm from) to the UK (where I am now) so as you can imagine it needs a lot of work. This is the first video I've seen that actually helped me understand how to restore this canoe. Thank you so much for this
this series is going too be a joy too watch. as i said in the other video thank you for saving it. so glad it didn't end up in a dump. still has a lot of good years too it.
Thanks 🙏
turned out real nice
I was just given a free canoe that fell off a truck because it wasn't tied down
I'm going to learn even more about fiberglass than you taught me - ha ha
great work and wise words about restoring things to a better place than they were before.
You stated in your full restore video, that you had lot of footage that you would be releasing, showing us more of the individual techniques you used. Is this still your plan?
I'm using your videos as a blueprint for my own canoe restore. I'm particularly looking forward to the
-varnish of the hull
-gunnel replacement
-weaving of the seat
-making your paddles
Fantastic videos, looking forward to more.
All the best🙏
I really like your work. I really do. Also you did not do a bad job reparing the canoe. But actually I think you need some more input for repairing fibreglass the right way. ;) @oldshovel
Probably take some look at repairingvideos from aircraft (glider aircraft) to see how it works. There are also some bike repair videos really well done. Mostly german guys doing these vids, or the dutch. Especially when repairing aircraft. If you know some german I could also recommend a book to you which basically is used by every german aircraft technician to repair fibreglass (and carbon) aircraft.
If youre doing two layers of glass up on each other, the upper layer must be slightly bigger than the lower one, such that every patch has a bond to the old material - where we again have to see different layers to bond. Otherwise it is just an extra layer of mass you add - which you would not want. The extra layer which has the same size as the lower one will not add any stiffness. Also the second layer must be layed up in another direction. In this case it is not that bad as it is bidirectional cloth and therefore will be just fine. But even her it would be better to use a difference of 45deg in layout. Probably it is also an idea to use less resin or at least use some techniques to even it up in place of just putting masses of resin onto the boat. It is just a canoe, it is not that bad. But after doing this several times the cannoe will get heavier without gaining any stiffness. This is not what you want for that boat.
Otherwise please continue. This shows how easy it is to repair stuff. And how much joy it can bring to someones life. I especially like your bike restoration videos. I really love it. II always tried to restore my bikes and maintain them as long as somehow possible. Also did it with some people here and gave them "old new" bikes if they can not afford a new bike. I love it and hope you can encourage more people to continue keeping their old stuff repaired rather than consume new stuff all the time - as it does not make you any happier. :)
nice looking canoe :) im in the works of re doing mine and stumbled on the video very helpful :)
How could anyone give this masterpiece a thumbs down‽
to much Im doing the same thing exactly just wanted to see what maybe more tips out there and I found you the funniest thing your canoe is exactly the same colour as mine
Catching up on some of your videos and wonder if you'll post more about this canoe! Looks like a great project. If you don't have one yet, you should find a copy of Omer Stringer's The Canoeist's manual. In it, he describes the J Stroke which is essential in keeping the canoe straight without moving the paddle from one side to the other. Lots of videos about it too obviously. Merry Christmas from Ottawa!
Really enjoyed your video. I have pretty much followed what you did to restore my canoe. One question, how long did you wait after you painted your canoe to apply the varnish?
Cool project
Thanks 🙏
Very good job 👍
Thanks 🙏
Great video!
Thanks
Hi!
I was just wondering what you use on 1:02-1:42, and on 6:09. Is it a kind of disc sander? Is it a drill with a disc attached to it? What kind of sand paper/disc you use? Is there any difference?
Thank you!
Great stuff! Quick question...I've not been able to find the length and width of this boat. Also, seems to have flat sides?(no tumblehome?)
Thanks!
How are you? What grit you use to send the fiberglass patches and the bondo for the whole body? Also what is the brand of the paint you use for your canoe I am in the process to do the same thing on my Canoe. Great Job! Thanks...
I have a leak on the inside of my SportCraft Canoe. Would the same process be recommended for interior canoe repair along the side interior wall?
What grit sand paper did you use on the angle grinder and orbital sander?
Have you released the section where you restored the Gunwales with the wooden trim?? I'm really looking forward to that. You've done amazing work. I have restored and repaired my paddles half a dozen times but I got my hands on a free fibre glass canoe recently too and I love the inspiration.
Actually I never ended up releasing much mor. The view on them were so low I did not continue. I still have all the footage an may edit and release it. Knowing someone is interested is good to know.
@@oldshovel sorry to hear it never got a high view count. Even if it's just me I'll be watching it. I really would like to see how you ran that wood trim over the gunwales specifically. I know I could do it myself but it's good to have a second opinion and some inspiration
oldshovel you can just send it to us two...
Count me in too!
It's weird I feel like deja vu but like I hadn't at the same time and still watched the whole thing again.
Lol. Yes same feel, some of the same footage with more focus on the steps for the fiberglass repair. Thanks for watching 😁
How did the Bondo filler hold up for you? Any issues with shrinking or use in water?
I LOVE that Quote: "Whenever God restores something, He restores it to a place greater than it was before!"
Dido. When I saw it I wanted to share it. Awesome and true.
@@oldshovel I'm glad you did!
That last part you did with the blue. Did you mix the blue paint with the Epifanes varnish?
How did the paint hold up for you?
@oldshovel Hey I was just wondering what type of grinder did you use?
你好，请问你这边的风景为什么这么美丽。让我有一种想去旅游的冲动，谢谢你让我看见如此美丽的风景！
谢谢
What grit sandpaper did you use
That work turned out very nice. Thanks for the video. Check out a series of canoe instruction films made by the late Bill Mason.
Ещё круче!!! )))
I may have missed something but what's the name of the song at the end there. I followed the music link in the description and that wasn't it.
You didn’t I did not list the song but the music service I use. The song is Pina Coladas by Megan Tibbits. www.epidemicsound.com/track/HtH2P5b9Kr
I know you linked The company for the sound rights. But could you tell me what song was used, and also could you credit it in the description for other people who want to find it?
What brand paint?
Only problem I had with this restoration is the catalyst mix. It's by volume not weight. 1 oz liquid VS 1 ounce weight are not the same thing. An oz of liquid mercury and an oz of cooking oil are ounces in difference. You don't weigh volume.
Didn’t we see this a couple weeks ago?
Yes but this focused on the fiberglass the other one was more the whole canoe. Nice to see again though
U should show this to Adidas
Lol. Someone else said that a while back and the funny thing is I never thought of it that way and now I can’t think of it any other way. Thanks for checking in and watching.
@@oldshovel Post on ig and tag #vintageadidas. This is the exact look of their classic shoe boxes. All the best.
Adidas brand canoe...