Which Liquid Works Best in the Glitter Glass Snow Globe Tumblers | 4 Different Methods | KCC Glitter
Vložit
- čas přidán 1. 04. 2023
- Thank you for watching this tutorial on what liquid I liked best while filling Glass Snow Globe Tumblers with glitter! Check out my previous tutorial on how I sublimated the glass snow globe tumblers with a tumbler press! The awesome heat press that I use can press 160z, 20oz, and 30oz straight sublimation tumblers, and can press the 11oz, 15 oz sublimation ceramic mugs, and many more! I hope you enjoy!
KCC Glitter - kccglitter.com/
EENOUR Tumbler Press - amzn.to/3tnvAvE
DISCOUNT Code: BYHNLCNS (10% off for green), 9R6JDHGO (10% off for purple)
Please join my Facebook community! / epoxytumblersandpens
linktr.ee/kristiscustomcreations
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoffee.com/KCCyoutube
Products used/recommended:
EENOUR Tumbler Press - amzn.to/3tnvAvE
UV Resin - amzn.to/3hcKzUA
UV Nail Lamp - amzn.to/33p898i
Finger Cots - amzn.to/3qprjo0
220 Grit Sandpaper - amzn.to/3rYKC9j
EcoTank ET-15000 - amzn.to/3xDqWKL
Sublimation Ink - cosmos-ink.com/
Vevor Heat Press - amzn.to/3SOelia
Vevor Hat Press - www.amazon.com/dp/B073LQ8XW5
** Vevor Hat Press Coupon Code - 40B073LQ8XW5 **
Sublimation Trucker Hats - amzn.to/3L3T4Os
Shirts (only use Heather colors) - www.jiffyshirts.com/gildan-G6...
Heat Tape - amzn.to/3hywn82
Tape Dispenser - amzn.to/3hy3xVf
A-Sub Paper - amzn.to/3ebwWSX
S-Race Paper - amzn.to/2UOb3mc
Silhouette Cameo 4 - amzn.to/3oaC9id
Flynn Sister's Epoxy - www.flynnsisterssupplyshop.co...
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
About me: I have been making epoxy tumblers for approximately seven years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicsound.com/referra...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you. - Jak na to + styl
Thanks for the video 😊
Timestamps:
0:21 - eye contact solution
3:43 - baby oil
6:35 - Elmer’s glue
10:43 vegetable glycerin
@@Queenieb03 thank you for the time stamps!
I always add my liquid first, about 1/3 of the way up, then add glitter. Finish filling with liquid and wahlah! Less bubbles ☺️ beautiful cups hate you had to pitch a couple.
I used the Elmer’s magical liquid mixed 2/1 with majority of it being distilled water. It lets the glitter stay suspended longer than 50/50 glycerin/distilled water mixture.
I had the Elmer's magical liquid too but I only had 4 glasses to play with 😂 I would like to give the magical liquid a try soon tho! 🥰 Thank you! ❤️
This is what I tried the first time too and liked it! Gonna try contact solution next
So 2 parts distilled water 1 part magic liquid?
What is Elmers magical liquid? What are the measurements for this mixture?
Thank you so much for this
This is the most helpful video everyone just mentioned the glycerin heh forget that!!! The contact solution is a perfect choice!! I'd love a video where you test coloring the solution with mica powder and also adding polymer bits to it. You helped me so so much with this thank you!
I've use glycerin with fine glitter in my snow globes and it worked beautiful Thank You for showing us.
I just ordered the kit before I even saw your video … can’t wait to try to UV resin …. And molds … ❤
Out of all the videos ive watched on how to make these cups yours is my favorite, simple easy directions, great video
Aww! Thank you so much!!! 🥰
Oh my goodness you never cease to amaze me!!!! I absolutely Love these Gorgeous tumbler’s! You always make everything look so easy your just so flipping talented!!! And the sticker’s for the bottom of your tumblers are Beautiful… soo classy! I always get so excited when you put up a new video, bc your Creation’s are Always Gorgeous! I hope you are doing good, and As Always Blessing’s to you my Beautiful friend!🥰💗🌸
Aww! Thank you so much! ❤️ I definitely can't take credit for the stickers on the bottom of the cups, that is all Kari with Critter Cup Customs.. she's so talented!!! Blessings as always Mimi! ❤️
These are beautiful! I had struggled with filling the hole so I gave up lol. I’ll try again after I sublimate!
Thanks! I have a kit that I bought from resin rockers that I'm going to try next for plugging the hole.
I use 2 tbls for every 1 cup of water, have never used the contact solution but I will try after watching this video, thank you for this informative video I love it.
Beautiful job I'm gonna try ur method thanks for the video 😊
Thank you and thanks for watching! 🥰
I tried the Elmer’s “magical” stuff and distilled water. It did bubble badly also. It’s really thick. I let it sit and gas off overnight but the bubbles didn’t go anywhere. After watching a few more CZcams videos that recommended spritzing the bubbles with 91% alcohol, I thought I give it a try. . It totally worked. It’s been about 2 weeks and you can shake it and the bubbles don’t come back. It is a very dense solution so it moves very slowly and the glitter stays suspended , which some people like because when you have your drink in your tumbler you can’t keep shaking it. I think there might be a correct proportion of water to glue that may make it work great. Just not sure what that is yet.
Thanks for doing the video. I love these comparison videos. It give us options!
Sounds like 40/40 water/glue and 20 alcohol:)
I like the eye solution! No mixing lol
I agree with the previous post "The Elmers Magic Slime" works the best for me.
Thanks! I have some, just haven't been able to make any with it yet. I'll try it next! 🥰
Wow nice❤
I have contact solution that expired and it’s brand new still sealed. I felt bad throwing it away, glad I now have a use for it 😁
Try putting some of your liquid in before glitter. Some have said it keeps glitter from clumping at the top.
So thankful I found this video! I just tried my first snow gloves with glue/water and had the same problems! I thought it was me! 10:13
It definitely wasn't you! Lol. Reference the glue / water, I've had a few suggestions saying to add some water before adding the glitter and that it helps. I found that I like glycerin/water and contact solution best So I probably won't be trying the glue again. Lol
@@KristisCustomCreations I did that and still no luck. I think the mix is too thick and the glue binds the glitter and the glitter can’t break free.
@@jamievanwagoner3754 good to know, thank you! I'm definitely gonna stick with what works for me! 🥰
How pretty! I cannot wait to make one. Please give me the link for the cute stickers!
Hello i wonder how it different it would be with the glue mix if you put some of the liquid in the cup before the glitter was added maybe can be your next video? 😉
I'm getting ready to try my first snow globe tumbler. Do you recommend fine or chunky glitter?
Love these!! new to your channel where do you get your tumblers from?
If you mess the tumblers up you can shake the liquid and glitter out into the trash. Then keep rinsing until everything is gone. Then i do an alcohol rinse after dawn dish detergent
Wow! Thank you for doing all the testing! Much appreciated. 💐❣️. P. S. Doesn’t the contact solution make the glitter settle quicker than the glycerin or baby oil? Thanks again! 🌻
Yes, It settles and moves a lot faster with contact solution. The glycerin and baby oil is a much slower settle.
This video was so helpful! Thank you. Any chance youve successfully shipped a finished glass? Do they ship well?
I'm so glad you found it helpful! ❤️ I did ship one glass tumbler. I made sure to put lots of padding around the glass and it shipped just fine. 😊 I would recommend making sure that it has insurance on it though because USPS can be so rough with packages.
I use the Elmer’s glue…bubbles oh yes lol I watched lots of videos and they said to degass for about 24-48 hours. I love the way it flows. Fine glitter is the devil. It clumps really bad in the glue.
Just a thought...40% water, glitter, 40% glue, 20% alcohol. Shake!
Add alcohol to the glue distilled water mix. Cuts bubbles - use less glitter when you start
add your liquid first about a half to an inch.. also i use elmers clear glue and elmers magic
Are you using the baby oil only or mixing with water?
I was wondering if you would know or anyone if lens cleaner would work?
You should add less glue. Try lower down your glue ratio and add more distilled water. Some people like slow effect.
Hello, can you share the best place to order the double glass libby cups?
Hello, I have recently bought some from Stainless Depot and they were great quality
Use Elmer’s magical liquid. I like all them except the glue one. Where did you get all your decals?
Thank you... I actually had Elmer's magical liquid but I only had 4 tumblers so I didn't try that one. Lol. I got my images on Etsy.. they are digital files that I sublimated on to the glass. In my previous toutorial where I sublimated the tumblers, I have the links to the Etsy listings in the description.
Can anyone tell me where she got the cup from
How did you get the hole at the bottom? I'm new to all of this, and my family challenges me every time.
The cups actually already came with holes in them. 😊 Since making this video, I've been ordering my glass globe tumblers from Stainless Steel Depot and they are great.
how did u get the hole in the glasss with out breaking it
The tumbler came with the hole already in it.
For some reason I got a lot of bubbles at the top that moves depending on how my cup is sitting when I used the contact solution, any tips?
Try tilting the cup and fill in the bubbles with a syringe. You want as little air as possible in there before you seal it up. :)
Thank you I have been wanting to make some I now will I have everything I need would love to send you p pictures when I'm done
Great video!!! Where did you get your tumblers from?
Thank you! The Tumblers in this video came from a random company I found online but I did not care for them because they were all different sizes from each other. I ended up buying more from the stainless steel depot and I was much happier with the ones that I bought there.
@@KristisCustomCreations thank you. I ended up going to the stainless steel depot. Thank you so much for commenting back and the video content.
@@AmysExquisiteGifts you're very welcome! 🥰
can you use fine glitter in these or is better to use a chunky glitter?
Better with chunky. Fine glitter clumps.
No idea what you did with the glue mixture. You have to put a bit of straight distilled water in first, THEN the glitter, THEN the glue mixture.
Good to know! We mixed the glue with distilled water which is what we thought we were supposed to do. Then we put glitter in the tumbler and the mixture into the tumbler. That obviously didn't work so I definitely appreciate the advice!
@@KristisCustomCreations Yeah, getting the glitter wet with distilled water before pouring in the glue/water mixture will keep it from sticking at the top of the glass.
@@tracygee thank you! 🥰
I have a question. My snow globes came with a sealer. I see that you used silicone did you do that for appearance purposes or is it best not use the seal that came with it.
You can use the seal that came with it. The ones I originally ordered did not come with seals, that's why I didn't use one. I have used some since making the video that came with seals and they worked perfectly.
Okay Great thanks so much. Do you seal it with uv resin after you put it on?
@@latresastateman985 you're welcome! Yes, definitely seal it with UV resin after plugging it
Good night do I have a link for the person that does your label they look very nice
Thank you! A company on Etsy called GiftmanUK created it for me but I don't think they are still selling them on there, I had it made a few years ago. There are plenty of companies on Etsy who can make awesome logos. 😊
@@KristisCustomCreations thank u for the reply
@@moniquemoss626 you're very welcome!
How do we make the hole on the cup
The snow globe glass tumblers come with a hole already in the cup
Hi I like your videos but let me tell you about me My name is Sierraleona but for short it’s Sierra in the Covid I had a Stroke and I went blind in my left eye so know I want to work but I can’t right now however I started liking the Tumbler I’ve even ordered some and I tried to make one but now I like In your video I like the last one I just need to know what is it again.
I used glycerin and water not sure it works well
What brand name for contact solution
It was just a cheap Walmart brand contact solution.. I think Equate
Are contact solution and saline solution the same for tumblers? I have been struggling HARD getting my glitter to flow. I’ve tried probably 4 different “recipes” and ruin all 4 tumblers 😢
I don't think it would be considered the same thing. I find that using the Walmart brand of contact solution, which is pretty an inexpensive, is what I like using best. Which recipes have you tried so far?
@@KristisCustomCreations the Elmer’s magic liquid, clear glue and water, water and glycerin (once equal parts and once 1 part water to 3 parts glycerin), and mineral oil.
@@mrsravenrose2u oh okay, probably give the contact solution a try. It has been my favorite out of all of them. I think you will probably find it works a lot better than some of the other alternatives.
@@KristisCustomCreations thank you. Walgreens has 24 Oz on sale buy one get one half off. I’ll get some tomorrow and let you know how it goes!
@@mrsravenrose2u Yes, please definitely let me know how it goes!
Why wouldn't the tumblers come with a plugs? That's weird.
I have no idea why that particular one did not come with plugs but I haven't bought with that company since then. I have ordered glass globe tumblers from stainless steel Depot since making this video and they all came with plugs.
Thank you! I have been looking a long time for somebody to show me how to make the shimmery liquid process. Just got some contact solution and glitter today. Starting on some snow globes. I’ll have to show you picture when I’m done:)
@@HAL-2023 I would love to see how they turn out when you are done!!!
'promo sm'
a spray of Alcohol will pop the bubbles.. when using the glue method poor some of the solution in the tumbler first.
Thank you 🥰
Pour.. not poor.. LOL!! thats what happens when I don't have a light on when typing!
@@lettsgav001 🤣 I knew what you meant. Lol
💡 @AlphaDTFPrint invites you to explore their latest post, diving into the creativity of DTF printing on military tees. Share your thoughts on using uniforms as a canvas for self-expression! 🎭 #DTFprinting #AlphaDTFPrint